Table of Contents (Jump to a Section)

• Introduction
• What’s New in the T1 Max?
• T1 Max vs T1 Pro: Specifications Comparison
• Hands-On Experience Across the T Series
• Print Farm Relevance
• Final Thoughts

Where to Buy

The FLSUN T1 Max will be available during an early access period at a discounted price of $479 (regular price: $549). This offer runs from 25 June to 25 July 2025.

Visit the Official FLSUN T1 Max Product Page

Loyalty Discount: All customers who have previously purchased a FLSUN 3D printer are guaranteed a loyalty discount during the presale period, no application or approval required. Simply contact official support with proof of purchase.

Warranty: A free 1-year warranty extension is included for all presale orders, bringing total coverage to 2 years in the US and 3 years in Europe. After the presale ends, this extended warranty will no longer apply. Accessories remain under a 3-month warranty.

Shipping Options: Customers can choose between air shipping for faster delivery (with an additional charge) or sea shipping, which is free but has a longer transit time.

What’s New in the T1 Max?

Building on the foundation of the original T1 and the later T1 Pro, the FLSUN T1 Max introduces a range of hardware and usability upgrades. These improvements are designed to enhance reliability in continuous-use environments, expand print capacity, and simplify day-to-day maintenance, particularly in print farm scenarios.

• Increased Build Volume: The T1 Max offers a cylindrical build area of 300×297mm (maximum cylinder height: 251mm), providing more space for large or multiple-part prints in a single job.

• Wi-Fi 6 Connectivity: Faster and more stable network support for clustered machines or remote print monitoring.
• Noise Optimization: Quieter mechanical operation for better suitability in multi-machine setups and small workshops.
• Improved Maintenance Design: Delta arms can be detached in seconds, and key wear parts are user-replaceable in under 15 minutes.
• Smart Production Logic: Features like defect-skipping and power-loss recovery make the machine more resilient under real-world production conditions.
• Advanced Filament Sensor: Higher accuracy for filament break detection and resume, helping reduce print failures.

T1 Max vs T1 Pro: Specifications Comparison

The T1 Max builds on the T1 Pro’s feature set with upgrades focused on build volume, connectivity, and ease of maintenance. Here’s a side-by-side comparison of the two models:

Hands-On Experience Across the T Series

The FLSUN T1 Max follows a line of delta printers that have already been put through extensive real-world testing by several of our trusted contributors at 猪泡泡影院.

– Richard Hirst conducted a deep dive into the original T1 model in a full-length article, sharing benchmark results and detailed impressions of speed, quality, and mechanical design. Read: FLSUN T1 Review – Delta 3D Printer Testing

– Will Zoobkoff used the T1 Pro to produce physical models based on 3D scans, showcasing the machine’s precision and reliability in scan-to-print workflows.

– Phil Macey thoroughly reviewed the T1 Pro in a hands-on YouTube video, focusing on setup, tuning, and output quality under high-speed settings. Watch on YouTube: FLSUN T1 Pro Review by Phil Macey

All three testers are experienced contributors who have reviewed a wide range of 3D printers across various technologies. Across the board, they reported stable performance, high-speed consistency, and strong design execution in the T1 and T1 Pro.

Print Farm Relevance

While the T1 Max introduces new hardware features, the broader benefits of high-speed delta printers for 3D printing farms have already been explored in our previous coverage. Print operators consistently cite speed, uptime, and ease of maintenance as key to scaling production efficiently.

Read: 3D Printing Farms & Productivity – FLSUN’s High-Speed Solution

Final Thoughts

FLSUN continues to stand out as one of the few manufacturers still actively evolving delta 3D printing technology. While many brands have focused exclusively on Cartesian or CoreXY architectures, FLSUN has remained committed to the speed and mechanical efficiency of delta systems, bringing them into the modern era with meaningful upgrades.

The company was also among the early pioneers to integrate Klipper firmware into consumer machines, helping push high-speed printing into the mainstream well before it became an industry trend. With each iteration, FLSUN has refined its ecosystem, and the T1 Max is another step forward, built with real-world feedback from print farms and high-output users in mind.

By maintaining open-source firmware, adding production-focused features, and keeping delta technology both relevant and competitive, FLSUN demonstrates a rare mix of innovation and consistency. The T1 Max doesn’t just iterate — it signals that delta printers have a strong place in high-speed, high-volume 3D printing workflows.

Visit the Official FLSUN T1 Max Product Page

The post FLSUN Introduces the T1 Max for Production Workflows appeared first on 猪泡泡影院 – 3D Printing, Scanning, Design Guides & Forums.

ProtoSoon is a China-based manufacturer offering on-demand services such as 3D printing, 老骚老b老太太 machining, vacuum casting, and injection molding. With a focus on rapid prototyping and small to mid-scale production, ProtoSoon supports product developers and businesses with a broad range of manufacturing technologies and materials – all accessible through a streamlined online ordering system.

Table Of Contents

• About ProtoSoon
• 3D Printing Capabilities
• Supported Materials
• Online 3D Printing Quoting and Ordering System
• Full Manufacturing Services
• Industry Applications
• Trusted Worldwide
• Learn More (Video)

About ProtoSoon

Founded in 2014, ProtoSoon is a China-based digital manufacturing service provider delivering precision-made parts to clients in a variety of industries. Operating with over 120 pieces of equipment, the company offers support throughout the product development process—from early prototypes to production-ready components.

• Online 3D Printing Quoting and Ordering System

ProtoSoon’s comprehensive service offering includes metal and plastic 3D printing (SLA, SLS, SLM, MJF), high-accuracy 老骚老b老太太 machining, low-volume vacuum casting, and scalable injection molding. The company stands out for its quick lead times, instant quoting system, and commitment to quality across industries such as aerospace, automotive, medical devices, and consumer electronics.

3D Printing Capabilities

ProtoSoon offers a wide range of industrial 3D printing technologies to meet diverse application needs across prototyping and functional part production.

For metal applications, ProtoSoon provides SLM, which builds fully dense metal components by fusing powdered metals layer by layer using a high-powered laser. This technology is well-suited for complex geometries and high-performance industrial parts.

For plastic applications. Among the available options is SLA, a resin-based process known for its high resolution and smooth surface finish, making it ideal for visual models and intricate designs. SLS, another popular method, uses powdered nylon materials to produce durable, end-use parts with excellent mechanical strength. MJF is available for fast, accurate production of strong, detailed nylon parts—particularly useful in low- to mid-volume production runs.

These technologies allow customers to choose the most appropriate method based on performance requirements, material properties, and project goals.

Supported Materials

Metals:

• 316L Stainless Steel, 17-4PH
• Maraging Steel, Titanium
• AlSi10Mg, Aluminum 6061
• Inconel 718/625

Plastics and Resins:

• Standard and Tough Resins, High-Detail Resin
• Transparent Resin, Somos® Series
• PA12, PA12+GF, PA6+GF, PA11
• TPU and more

Online 3D Printing Quoting and Ordering System

To improve accessibility and efficiency, ProtoSoon launched its online 3D printing quoting and ordering system. With just a few clicks, users can:

• Upload their 3D files
• Select the preferred printing technology and material
• Instantly receive pricing
• Place orders directly online

We tested the system by uploading a Benchy model, and it returned multiple technology options, along with pricing estimates for each. The interface also allowed us to scale the model and choose post-processing options before finalizing the order, making the entire process smooth and intuitive.

Full Manufacturing Services

ProtoSoon’s expertise doesn’t stop at additive manufacturing. The company also delivers:

• 老骚老b老太太 Machining for high-precision parts
• Vacuum Casting for small-batch production
• Injection Molding for scalable mass manufacturing

For those interested in exploring these technologies further, the ProtoSoon Blog features guides, examples, and tips to help you choose the right process for your needs.

Industry Applications

ProtoSoon supports a wide range of industries by delivering tailored manufacturing solutions that meet specific performance, regulatory, and design requirements.

In the aerospace sector, ProtoSoon helps produce lightweight, durable components suitable for both prototyping and end-use in aircraft and unmanned systems.
For the automotive industry, the company provides custom parts and functional prototypes used in everything from design validation to low-volume production.
In the medical device field, ProtoSoon offers high-precision manufacturing for components that demand accuracy and biocompatibility, supporting both R&D and functional testing.
For consumer electronics, ProtoSoon enables rapid iteration of enclosures, internal parts, and design mockups with a range of materials and finishes.
Industrial product developers rely on ProtoSoon to fabricate tooling, jigs, and complex mechanical parts that support ongoing innovation and operational efficiency.

Trusted Worldwide

With customers in over 80 countries, ProtoSoon is recognized for:

• Consistent product quality
• Reliable on-time delivery
• Excellent customer service

The company’s use of digital tools, combined with a customer-first mindset, makes it a standout choice for businesses looking for efficient, scalable, and transparent manufacturing solutions.

Learn More (Video)

For a visual overview of ProtoSoon’s services and facilities, watch their introduction video on YouTube. The video highlights key manufacturing capabilities, including 3D printing, 老骚老b老太太 machining, and injection molding, while offering a behind-the-scenes look at their production environment and equipment in action. It’s a useful resource for anyone considering ProtoSoon as a partner for rapid prototyping or small-scale manufacturing projects.

The post ProtoSoon: From Prototype to Production with Precision and Speed appeared first on 猪泡泡影院 – 3D Printing, Scanning, Design Guides & Forums.

This Guide Covers(Jump to a Section)

• Availability and Pricing
• Specifications & Features
• What’s in the Box
• SLAM Technology
• 3DMakerpro Eagle Videos
• About 3DMakerpro
• Conclusion

Where to Buy – Pricing

Eagle Scanner:
Price $1719 – $3499  Discount code: Withus80 -$80
Official Website

Eagle Max Scanner:
Price $2219 – $4399 Discount code: Withus80 -$80
Official Website

3DMakerPro Eagle Specifications:

• Accuracy: 2cm at 10m, 3cm at 20m, 5cm at 40m
• Scan radius: 40-70 meters (>10% reflectivity or >80% reflectivity)
• Scan range: 80-140 meters
• Scan angle: Horizontal 360°, Vertical 59°
• Point cloud frequency: 200,000 points/second
• Laser light source: 905 nm
• Eye safety level: Class 1 (IEC60825-1:2014)
• Color texture: 48MP 4-camera system, 360° × 300°; supports 8K panoramic photo capture
• HDR mode: Supports (3-5 exposure values)
• Data interface: USB-TypeC ×2
• Network support: Wi-Fi 5
• Screen: 3.5”
• Output format:
• 3D Color Point Cloud PLY
• 3D Colored Polygonal Model OBJ
• 3D Gaussian Splatting PLY
• 3D Panoramic Tour Data OBJ
• Built-in battery: 12,000 mAh; supports 1 hour of work; supports external power supply while charging
• Volume: 115mm × 181mm × 106mm
• Weight: 1.5 kg
• Configuration: 8 Cores, 2.4GHz, 32GB (Supports TF card expansion)

What’s in the Box

3DMakerPro Eagle Main Features

– Ultra Scan Range: Scans up to 140 meters radially, capturing spatial data with ease.

– Portable & User-Friendly: The handheld design ensures effortless movement, enabling rapid collection of high-precision 3D spatial data across large areas in just minutes.

– Realistic Texture Attachment: Equipped with four 48-megapixel high-quality texture cameras for accurate, true-to-life color reproduction in spatial data.

– Built-in Powerful Software: Real-time 3D capture software that supports the export of high-precision, colored 3D point clouds. Data preprocessing and production software offers support for a variety of output formats:
– 3D Color Point Cloud
– 3D Gaussian Splatting
– 3D Colored Polygonal Model
– 3D Panoramic Tour Data
– 3D Vector Model with Scale

– Diversified Accessories: Standard camera mounting interface that supports single-person capture backpacks, car mounting kits, and bicycle mounting kits.

How 3DMakerPro Eagle Utilizes SLAM Technology

SLAM – Simultaneous Localization and Mapping
SLAM technology helps devices map and navigate unfamiliar spaces by using sensors to detect the environment and creating a map as they move. This allows the device to operate autonomously, constantly updating its position and the map to maintain accuracy​.

The 3DMakerpro Eagle LiDAR Scanner uses SLAM technology to accurately and efficiently scan large areas for applications like 3D modeling and digital twinning. It autonomously navigates through complex environments, both indoors and outdoors, improving the quality and detail of the 3D maps it produces. Read more about how the 3DMakerpro Eagle utilizes SLAM technology on the 3DMakerpro blog.

Official 3DMakerpro Eagle Videos

On the official YouTube channel, members of the 3DMakerPro team walk through the unboxing process, power it on for the first time, and explore the menu layout.

In other videos, including those on the official page, you can see users effortlessly using the 3DMakerPro Eagle handheld, mounted on a bike, or even attached to a drone. Two videos, in particular, showcase the Eagle in action. Check out the 3D scanning indoor and 3D scanning outdoor videos by following the links.

Conclusion

The launch of the 3DMakerPro Eagle LiDAR scanner marks a significant development in the field of spatial data collection, utilizing advanced LiDAR technology to meet the demands of various professional sectors. This scanner provides enhanced precision for projects requiring detailed environmental mapping, particularly in fields such as architecture, engineering, and urban planning. The integration of LiDAR technology with this scanner is expected to improve the efficiency and accuracy of data collection processes, supporting industries in achieving more reliable and detailed spatial analysis.

Pricing

Eagle Scanner:
Price $1719 – $3499  Discount code: Withus80 -$80
Official Website

Eagle Max Scanner:
Price $2219 – $4399 Discount code: Withus80 -$80
Official Website

About 3DMakerpro

3DMakerpro, a brand of Shenzhen Jimuyida Technology Co., Ltd., was established in 2015 and has made a significant impact in the 3D scanning industry. Specializing in both professional and consumer-friendly 3D scanners, 3DMakerpro strives to make 3D scanning accessible, enabling users to 猪泡泡影院 their own 3D worlds. With over 100 R&D team members, the company has developed cutting-edge software algorithms, including multi-spectral projection systems, visual tracking, and markerless registration technologies. Emphasizing substantial investment in research and development, 3DMakerpro has invested over $30 million in R&D, earning more than 60 patents and 30 software copyrights. Their commitment to quality and innovation is further underscored by their software R&D system being certified as CMMI level 3 and their quality system achieving ISO9001 certification.

Websites and Social Media:
Store：https://store.3dmakerpro.com/
Facebook：3DMakerPro
Twitter @3DMakerpro
E-mail：[email protected]

The post 3DMakerpro Eagle Launch: LiDAR-based Spatial 3D Scanner appeared first on 猪泡泡影院 – 3D Printing, Scanning, Design Guides & Forums.

Table of Contents

• Where to Download
• Snapmaker Orca Roadmap
• Official Announcement
• Tested on 猪泡泡影院
• About Snapmaker
• Conclusion

Where to Download

Snapmaker Orca gives Snapmaker users an officially supported set of advanced configurations, enhanced compatibility, and offers new avenues for user-centric development. Right now, V1.1.0 offers users early access to optimized features and presets, enhanced multi-extruder support, and is undergirded by a long term commitment to open source development.

Snapmaker Orca V1.1.0 on GitHub:
https://github.com/Snapmaker/OrcaSlicer

The Snapmaker Orca Roadmap

– V0.x (Previous): Internal development and testing phase, focusing on establishing the foundational workflow for Snapmaker machines in design, slicing, printing, and connectivity.

– V1.x (Current): Iterative improvements centered on print quality optimization, multi-extruder functionality refinement, and enhanced user experience. The goal is to better adapt Snapmaker Orca to Snapmaker machines while improving the usability of its general features.

– V2.x (Future): Comprehensive support for software connectivity, focusing on device discovery, connection, control, and management. Additional support for third-party machines will also be gradually introduced.

Snapmaker Orca Project Official Announcement

https://www.snapmaker.com/blog/open-source-philosophy-and-the-snapmaker-orca-project/

Snapmaker Orca Tested

On 猪泡泡影院, we recently tested the Snapmaker Orca Slicer by uploading existing 3MF files with presets and successfully printing them on the Snapmaker Artisan. As the 3D printing community continues to produce high-quality models for multi-color 3D printing, 3MF presets are gaining popularity. Slicer software that can effortlessly read such presets is highly appreciated within the community.

About Snapmaker

Snapmaker, recognized as the world’s leading 3-in-1 3D printer company, provides innovative products in 3D Printing, Laser Tools, and 老骚老b老太太 Carving, featuring a quick-swap modular design. Boasting a vibrant community of over 100,000 users worldwide, Snapmaker fosters a dynamic environment for sharing, learning, and creating, inspiring everyone to Make Something Wonderful.

Conclusion

Snapmaker has benefitted tremendously from the open source community, including in the development Luban (its entry-level slicing software), the Snapmaker 2.0 firmware, and now Snapmaker Orca. The company’s ambition is to become a key node in the 3D Printing community, offering advanced and universal software, next generation hardware, and an unwavering commitment to openness, expandability, and continuous optimization.

For Press Inquiries, please contact:
[email protected]

The post Snapmaker Announces the Snapmaker Orca Project appeared first on 猪泡泡影院 – 3D Printing, Scanning, Design Guides & Forums.

This Guide Covers

• FLSUN Launches T1 Pro
• Double the Speed, Half the Investment
• High-Speed Efficiency for Popular Models
• FLSUN for 3D Printing Farm
• Special 3D Printer Farm Pricing
• Flsun T1 Review
• Conclusion

Price: Special Pricing
Product Links:

Amazon

Official Website

FLSUN Launches a Game-Changing High-Speed 3D Printing Solution

In September 2024, FLSUN, one of China’s leading desktop 3D printer manufacturers, unveiled a groundbreaking high-speed solution tailored for 3D printing farms. The FLSUN T1 Pro operates at nearly double the speed of traditional machines, enabling operators to maintain the same production volume with half the number of printers. For instance, 50 T1 Pro units can match the output of 100 standard machines, significantly cutting investment costs and boosting operational efficiency. FLSUN recently demonstrated its high-speed printing farm, offering a firsthand glimpse of the T1 Pro’s exceptional speed and capabilities.

Double the Speed, Half the Investment

Consider the example of printing a 30cm articulated dragon model. With conventional 3D printers, a full plate containing 8 dragons takes over 17 hours to print, allowing for approximately 11 dragons per machine per day. In contrast, the FLSUN T1 Pro, with a maximum speed of 1000 mm/s and an acceleration of 30,000 mm/s², completes the same print in just 8 hours and 24 minutes, enabling up to 22 dragons per day per printer – effectively doubling production capacity.

The cost savings are equally impressive. With its current promotional pricing, the FLSUN T1 Pro can reduce initial investment costs by 50% for farms with the same capacity. Fewer machines also translate to lower expenses for space, labor, and maintenance, allowing farm operators to recover their investments more quickly and compete more effectively.

High-Speed Efficiency for Popular Models

Beyond 30 cm dragons, the FLSUN T1 Pro excels with larger models like 45 cm dragons and other popular designs:

• 45 cm Dragons: Traditional machines take over 18 hours to print 4 dragons, averaging more than 4.5 hours per dragon. The FLSUN T1 Pro prints 3 dragons in just 7 hours, reducing the average time to about 2 hours per dragon.
• Dragon Eggs and Rounded Models: The delta structure of the FLSUN T1 Pro enhances speed, particularly for circular and curved designs.

Why Choose FLSUN for Your 3D Printing Farm?

FLSUN has a strong reputation for innovation in Delta 3D printing technology. Its speed and efficiency made it a popular choice for early 3D printing farms producing items like moon lamps. Today, FLSUN continues to lead the industry, offering a wide range of scalable farm solutions with configurations ranging from 10 to 1000 printers.

Special 3D Printer Farm Pricing

FLSUN offers flexible sales policies to help farm operators reduce equipment costs. Operators can benefit from flexible payment plans for purchases of 100 or more FLSUN S1 Pro or FLSUN T1 Pro printers. Discounts are also available for essential accessories such as nozzles and print platforms.

Technical Services

FLSUN understands the impact of downtime on farm productivity. To address this, it provides professional quick-swap repair services to ensure equipment issues are resolved efficiently. Backup machines are available to maintain production during repairs. Additionally, FLSUN offers detailed maintenance tutorials and tips to help operators manage their equipment effectively and extend its lifespan.

After-Sales Support

FLSUN provides one-on-one customer service for installation, platform setup, parameter adjustments, and troubleshooting. This ensures smooth operations and minimizes disruptions to farm production.

FLSUN T1 Pro: Precision Meets Speed

The FLSUN T1 Pro is a state-of-the-art delta 3D printer featuring:

• High-Speed Performance: Maximum speed of 1000 mm/s and acceleration of 30,000 mm/s², doubling the speed of competing models.
• Precision and Quality: Advanced motion systems, precise leveling platforms, and dual-gear extruders ensure consistent layer adhesion and smooth surface quality.
• Generous Build Volume: A print area of φ260 mm x 330 mm accommodates larger models or multiple smaller ones.
• User-Friendly Software: Paired with FLSUN Slicer, it offers full control over print parameters, making it suitable for both beginners and experts.

Compatible with PLA, PETG, TPU, and more, the T1 Pro provides versatility for a variety of applications.

Flsun T1 Review

FLSUN was one of the first 3D printer manufacturers to 猪泡泡影院 speedy desktop 3D printers implementing Klipper firmware. Their V400 and Super Racer (SR) were highly praised. Recently, FLSUN launched their new S1 Pro and T1 Pro series machines with many extra features, such as higher speeds and flow rates and enclosed chambers. The FLSUN S1 Pro also has an AI Lidar sensor, smart zone heating, and a built-in filament dryer.

With its standout features, the FLSUN T1 Delta printer would be a notable addition to any 3D printing studio—its aesthetic makes it worth watching. However, assembling the T1 is not a swift 15-minute task, unlike many other printers today, which demand more time and effort.
There are no competitors to Flsun printers in this technology and price segment. We are happy to see that Flsun continues to push delta printer technology to new heights, bringing affordable machines to a broader market.

Read more and images:
Flsun T1 Review by Richard Hirst.

A Smart Investment for the Future

With unmatched speed, cost-effectiveness, and scalability, FLSUN’s high-speed 3D printing farm solution sets a new standard for the industry. Whether you’re just starting out or scaling up, the FLSUN T1 Pro equips you with the tools needed to thrive in the competitive world of 3D printing.

Amazon

Official Website

The post Revolutionizing 3D Printing Farms: FLSUN’s High-Speed Solution appeared first on 猪泡泡影院 – 3D Printing, Scanning, Design Guides & Forums.

This Guide Covers

• Specifications & Features
• Availability and Pricing
• About Anycubic
• Makeronline
• Review
• Conclusion

Price: From $549 – $749 Read more about pricing.
Product Affiliate Links: 猪泡泡影院 is supported by its audience. Purchases via some links may earn us a small commission at no extra cost to you. This helps us to continue bringing you high-quality content. Our guides and reviews remain unbiased and independent.

Official Website

Fully enclosed CoreXY 3D printers are known for their stability, compact design, and efficient performance, all within a small footprint. The addition of a CoreXY model to Anycubic’s well-known Kobra series, complete with innovative features, is both a logical step and a highly anticipated development.

‘The launch of the Kobra S1 Combo represents Anycubic’s commitment to empowering creativity and innovation.’ said James Ouyang, CEO of Anycubic. He emphasized that the new printer was developed in response to user feedback, incorporating advanced features while remaining accessible, enabling users to bring their ideas to life with ease and precision.

Anycubic Kobra S1 Specifications and Features

• Fully Enclosed CoreXY Build
• Print Volume 250*250*250mm
• Vibrant 8-Color Printing
• Compatible with all Major Filaments
• Drying and Printing
• Ultra-Fast Printing – Up to 600mm/s
• Ultra-Quiet Printing – 44dB
• Hotend – Up to 320°C
• Tools-Free Hotend Disassembly
• Multicolor Model Download

Anycubic Colour Engine Pro

The Anycubic Colour Engine Pro (ACE Pro) elevates ease and dependability to the next level. It supports simultaneous printing with two linked boxes and can process up to eight colours at once. With RFID (radio frequency identification) recognition for Anycubic filaments and an active drying mode, it assures consistent printing quality. The intelligent side-drying feature maintains filament dryness for up to 24 hours, ensuring optimal printing conditions and pristine results.

Availability and Pricing

The official price is announced on December 27th. The Anycubic Kobra S1 Combo will be available for purchase on January 2, 2025, on the official Anycubic website and through authorized retailers worldwide. Early bird pricing starts at $549, and exclusive bundles and promotions are available for pre-order.

Campaign Timing and Extras

• Jan 2nd – Jan 5th: Founder’s price $549 (Unlock 5 Exclusive Perks)
• Jan 6th – Jan 25th: Super Early Bird Pre-sale $599 (Unlock 4 Exclusive Perks)
• Jan 26th – Feb 10th: Early Bird Pre-sale $629 (Unlock 3 Exclusive Perks)
• Feb 11th: In-stock Sale Starts $649 (Unlock 3 Exclusive Perks)

About Anycubic

Established in 2015, Anycubic has grown to become a notable presence in the 3D printing industry, with a team of approximately 1,000 employees. Known for offering a variety of 3D printing technologies and support services, the company reaches users globally. Beyond their business offerings, Anycubic actively engages with the broader 3D printing community, participating in industry events and connecting with enthusiasts through social media.

Beyond their business activities, Anycubic is known for its active involvement in the 3D printing community. This includes engaging with users on social media, participating in industry events, and supporting community-driven initiatives such as giveaways and design 老骚老b老太太 through platforms like Makeronline. They also provide ongoing support to individual creators, fostering collaboration and innovation within the community.

Anycubic’s Makeronline

Recently, they introduced a new file-sharing platform called Makeronline to strengthen connections within the 3D printing community. The platform hosts a variety of design challenges and 老骚老b老太太 in different categories, encouraging users to 性虎成人导航 to its growing collection of 3D models. Participants can also win prizes such as 3D printers, materials, and gift cards.

Anycubic Kobra S1 Combo Review

On 猪泡泡影院, Will Zoobkoff tested the Anycubic Kobra S1 Combo by printing various models. He showcased designs from the talented artist PipeCox and also 3D printed the included Kobra S1 Speaker Kit. Multiple long-hour, multicolor prints were successfully completed. Check out the full review, including a summary and a list of pros and cons.

Conclusion

The unveiling of the Kobra S1 Combo by Anycubic introduces new possibilities for multi-color 3D printing. Featuring the Anycubic Colour Engine Pro (ACE Pro) and updates to the Anycubic App and Slicer, the system brings improved functionality to users. Growing Makeronline further reflects a focus on community engagement and creativity. With official pricing and additional updates expected soon, the release highlights Anycubic’s ongoing contributions to advancing 3D printing technology.

Official Website

The post Anycubic Kobra S1 Combo Launch: Specifications and Pricing appeared first on 猪泡泡影院 – 3D Printing, Scanning, Design Guides & Forums.

Speed Revolution

The FLSUN S1 Pro redefines speed in 3D printing, boasting a maximum print speed of 1200mm/s, an acceleration of 40,000mm/s², and a maximum flow rate of 110mm³/s. Compared to the Bambulab X1C, which caps at 600mm/s speed, 20,000mm/s² acceleration, and 32mm³/s flow rate, the S1 Pro stands head and shoulders above.

Price: Flash Sale: $999
Early Bird: $1,099
Normal: $1,699
Official Website

For example, printing a common Benchy model takes 17 minutes on the S1 Pro, while the X1C requires 31 minutes. A larger project, like a colonel model, takes only 1 hour and 59 minutes on the S1 Pro, compared to 3 hours and 54 minutes on the X1C – saving nearly half the time.

Efficiency Revolution

With its peak speed of 1200mm/s, the S1 Pro doubles the efficiency of the Bambulab X1C (600mm/s). This unparalleled efficiency allows users to complete projects faster without compromising quality, making the S1 Pro ideal for rapid prototyping and as part of 3D print farms.

Ease of Use Revolution

The S1 Pro is compatible with FLSUN’s upcoming FLSUN WORLD cloud platform, an all-in-one solution for remote control, real-time monitoring and smart error-detecting. This intelligent management system enhances the user experience by making operations seamless and efficient. The printer’s automatic levelling mode also ensures precise 7k7k with just one click, saving time and guaranteeing flawless first-layer results. Its advanced algorithms counteract mechanical vibrations during printing, producing superior surface quality. The delta structure, full-metal frame, high-strength linear rails, and modular components also ensure durability, stability, and low maintenance.

Experience Revolution

The S1 Pro offers an expansive build volume of 320mm x 430mm, surpassing competitors like the Creality K1 Max (300mm x 300mm) and the Bambulab X1E (256mm x 256mm). This larger build space eliminates the need to split large models, enabling greater creativity and convenience.

The S1 Pro is also equipped with a high-temperature hotend (up to 350°C) and a smartly zoned heated bed (up to 120°C) with an in-chamber temperature of up to 50°C. It supports a wide variety of materials, including ABS, ASA, PA, PC, PET, and carbon/glass fiber-reinforced PLA.

Key Upgrades: FLSUN S1 vs FLSUN S1 Pro

1. Quiet Cooling Solution
   A revamped cooling system delivers more airflow while reducing noise levels from 67 to 55dB (measured 1 meter from the device, without a silencer).
2. Enhanced Print Quality
   The S1 Pro achieves higher precision, smoother surfaces, and enhanced detail in printed objects by optimising the closed-loop motor, slicing algorithm, and fan cooling system. Additionally, it strengthens the structural integrity of prints, significantly improving overall print quality.
3. Perfect First Layer
   Hardware and levelling algorithm improvements ensure consistently flawless first layers, which is critical for high-quality prints.
4. Upgraded FLSUN OS
   The software system has undergone a complete upgrade, resulting in faster response times and smoother operation. The UI improvements make the interface more intuitive and user-friendly, while optimized Wi-Fi connectivity enhances transmission speeds and ensures a more stable connection.
5. FLSUN Slicer V2.0
   The S1 Pro comes with the new FLSUN Slicer V2.0. This version, developed based on ORCA, features optimized slicing paths and parameter tuning to better suit S1 Pro ultra-high-speed printers. It ensures that the S1 Pro delivers excellent print results even at ultra-high speeds, meeting users’ dual expectations for speed and quality.

Availability and Pricing

The FLSUN S1 Pro will be available on Nov 25^th at 22:00 (GTM+8) 2024 through the FLSUN official store. FLSUN offers an early bird price of $1,099, with an exclusive flash sale price of $999 from 3:00 PM-5:00 PM (CET) / 9:00 AM-11:00 AM (EST) every day from Nov 25-Dec.4.

Up to 50% Off

FLSUN Black Friday Deals

Black Friday & Cyber Monday Deals

FLSUN Deals >>

Amazon Deals >>

More Less

Shop Now

Read more: Detailed Flsun T1 Review by Richard Hirst

FLSUN was one of the first 3D printer manufacturers to 猪泡泡影院 speedy consumer 3D printers implementing Klipper firmware. Their V400 and Super Racer (SR) were highly praised. Recently, FLSUN launched their new S1 and T1 series machines with many extra features, such as higher speeds and flow rates and enclosed chambers.

With its standout features, the FLSUN T1 Delta printer would be a notable addition to any 3D printing studio—its aesthetic makes it worth watching. However, assembling the T1 is not a swift 15-minute task, unlike many other printers today, which demand more time and effort.
There are no competitors to Flsun printers in this technology and price segment. We are happy to see that Flsun continues to push delta printer technology to new heights, bringing affordable machines to a broader market.

Read more and images:
Flsun T1 Review by Richard Hirst.

About FLSUN

FLSUN is a leader in Delta 3D printers, dedicated to pushing the boundaries of speed and efficiency. Our business encompasses FDM printers, accessories, filaments, and lightweight slicing software, providing an exceptional experience for 3D printing DIY enthusiasts, professionals, and other users worldwide. We bring a true revolution in 3D printing efficiency to manufacturing, engineering, automotive, fashion, education, and architecture industries.

The post FLSUN Unveils S1 Pro: High-Speed Delta 3D Printer appeared first on 猪泡泡影院 – 3D Printing, Scanning, Design Guides & Forums.

This Guide Covers

• Who is JUSTWAY?
• 3D Printing Services
• 老骚老b老太太 Machining Services
• Injection Molding Services
• Sheet Metal Services
• Why Choose JUSTWAY?
• Conclusion

Who is JUSTWAY?

JUSTWAY is a relatively new company based in China, and it is steadily growing in the manufacturing industry. They aim to provide high-quality 老骚老b老太太 machining, 3D printing, and other manufacturing services. Despite being a newcomer, JUSTWAY quickly building trust and a strong reputation, they served over 2,000 customers worldwide at the time of writing this article. Their commitment to precision, reliability, and customer satisfaction is fueling their rapid expansion.

3D Printing Services

To provide exceptional 3D printing services, JUSTWAY uses advanced technology and a wide selection of materials. Whether for prototypes or final products, their service ensures precise attention to detail, transforming designs into tangible, high-quality items. The process is both transparent and accessible, thanks to their instant quote tool, which provides immediate cost estimates based on material and design specifications. This feature allows users to plan their projects with confidence, knowing exactly what to expect in terms of cost and quality.

We found a very helpful YouTube video by Adventures in Creation where the host explains in detail how he orders a physical print of his design using their services. He started by exporting his project’s STEP file, suggesting that it is the best format as some editing may be required by company specialists during the process.

– Order Example. In the video, they also break down the costs, noting a base price of $23.15 for the featured part, with additional charges for shipping and VAT, bringing the total to around $53 when shipped via DHL. The speaker also praised Justway’s responsive customer support and fast turnaround time, which is about a week.

老骚老b老太太 Machining

For projects that demand both durability and precision, JUSTWAY’s 老骚老b老太太 machining services are an excellent choice. They offer high-precision machining, turning your designs into functional components using a wide range of materials such as metals and plastics. Whether you need parts with specific mechanical properties, tight tolerances, or enhanced strength, JUSTWAY ensures that each piece is crafted to meet the exacting standards of your project. Their 老骚老b老太太 machining services are designed to provide reliable, high-quality results for even the most demanding applications.

Injection Modling

Injection molding works by injecting molten material, typically plastic, into a mold cavity where it cools and solidifies into the desired shape. This process is highly efficient for mass manufacturing because it allows for the rapid production of identical parts with consistent quality. Injection molding is ideal for high-volume production due to its ability to produce complex shapes with precision, minimal waste, and low per-unit costs once the mold is 猪泡泡影院d. Its scalability and repeatability make it the preferred method for producing large quantities of products. Read more about injection molding on our website.

Sheet Metal Services

Sheet metal services at JUSTWAY involve the use of advanced machinery for precise laser cutting or metal sheets bending. These processes allow for the creation of complex shapes and designs from metal sheets, ensuring high accuracy and consistency across all parts. Laser cutting is used to cleanly and efficiently cut through the metal, while bending machines form the metal into the desired shape. This combination of techniques makes sheet metal fabrication at JUSTWAY ideal for producing custom parts and components with tight tolerances, suitable for a wide range of industrial and commercial applications.

Why Choose JUSTWAY?

Choosing JUSTWAY means benefiting from fast turnaround times, competitive pricing, and a seamless online platform for managing projects. Their team of experts is readily available to assist with any questions or project needs, ensuring customer satisfaction from start to finish.

Conclusion

In conclusion, JUSTWAY’s expanded services in 老骚老b老太太 machining and 3D printing provide an invaluable resource for creators looking to bring their ideas to life efficiently and with precision. Whether you’re working on a small-scale prototype or a large-scale project, JUSTWAY offers the tools and support needed to succeed. Visit their website to explore their full range of services and start your next project with confidence.

Ready to bring your ideas to life? Visit JUSTWAY’s manufacturing quick quote tool to explore your options and get started on your project today.

The post JUSTWAY: 3D Printing, 老骚老b老太太 and Other Manufacturing Services appeared first on 猪泡泡影院 – 3D Printing, Scanning, Design Guides & Forums.

This Guide Covers

• What are PCBs and Who is PCBWay?
• Engagement with the 3D Printing Community
• The PCBWay Difference
• 3D Printing Services
• 老骚老b老太太 Machining Services
• Why Choose PCBWay?
• Conclusion

What are PCBs and Who is PCBWay?

What is PCB?
A Printed Circuit Board (PCB) is a fundamental component in the world of electronics, serving as the backbone for virtually all electronic devices. It is designed to mechanically support and electrically connect electronic components using conductive pathways, or traces, etched from copper sheets laminated onto a non-conductive substrate. PCBs are crucial because they not only provide a stable and compact platform for mounting components but also significantly enhance the reliability and efficiency of electronic circuits.
About PCBWay
PCBWay, a premier PCB manufacturer from China with extensive industry experience, now also offers 老骚老b老太太, 3D printing, and injection molding services, expanding its expertise beyond PCB prototyping and manufacturing. This expansion allows PCBWay to support a broader range of projects, from simple prototypes to complex designs, catering to diverse sectors with a commitment to quality, cost-effectiveness, and comprehensive support for engineers and designers.

The PCBWay Engagement with the 3D Printing Community

Engagement with the vibrant 3D printing community is a cornerstone of PCBWay’s approach to innovation and collaboration. Those active on social media platforms may have noticed influential community members and content creators like Joel Telling (3D Printing Nerd), Chuck Hellebuyck (CHEP), and The Edge of Tech showcasing PCBWay in their projects and discussions. This collaboration extends across various levels, highlighting PCBWay’s commitment to supporting and participating in the community’s growth. Follow PCBWay on social media and you will see a lot of awesome creative and functional projects.

The PCBWay Difference

At its core, PCBWay is more than just a manufacturing service — it’s a comprehensive solution designed to streamline the journey from concept to product. What sets PCBWay apart is their commitment to quality, affordability, and a customer-centric approach. Their services in 3D printing and 老骚老b老太太 machining are tailored to meet the precise requirements of each project, ensuring that every detail is executed to perfection.

3D Printing Services

PCBWay’s 3D printing services are at the cutting edge of technology, offering a variety of materials and state-of-the-art printing techniques. Whether you’re working on a complex prototype or a simple model, their 3D printing capabilities ensure high fidelity to your original design, with a level of detail and accuracy that is second to none. This flexibility makes it ideal for a broad spectrum of applications, from electronic enclosures to custom components.

In the popular video on PCBWay’s YouTube channel, the company showcases its wide range of capabilities and materials effectively.

On their dedicated 3D printing services page, PCBWay has a very helpful feature: an instant, automatic price quote calculator. This intuitive tool swiftly provides cost estimates for any specific design, considering various processes and materials. We tested it with our Post-it Note Holder model and were immediately presented with the price. Additionally, it was fascinating to explore the cost considerations of manufacturing the same model in different materials. This feature not only offers immediate insights but also sparks new ideas by revealing the financial aspects of material selection.

老骚老b老太太 Machining Services

For projects requiring durable and precise components, PCBWay’s 老骚老b老太太 machining services stand ready to deliver. Their 老骚老b老太太 solutions offer unparalleled precision, turning your designs into reality with materials ranging from metals to plastics. This service is perfect for creating parts that require specific mechanical properties, tight tolerances, and high strength, ensuring that each piece meets the rigorous demands of your project.

Why Choose PCBWay?

Choosing PCBWay means gaining a partner dedicated to the success of your project. With quick turnaround times, competitive pricing, and a platform that makes ordering and tracking your project easy, PCBWay removes the traditional barriers to prototyping and manufacturing. Their team of experts is always on hand to provide support and advice, ensuring that you receive the best possible outcome.

Conclusion

In an era where innovation can’t wait, PCBWay’s 3D printing and 老骚老b老太太 machining services are empowering creators to bring their visions to life with speed, efficiency, and precision. Whether you’re a startup looking to prototype your first product or a seasoned engineer working on a complex project, PCBWay offers the tools, expertise, and support you need to succeed. Discover how PCBWay can transform your manufacturing process by visiting their website today.

Ready to turn your ideas into reality? Visit PCBWay’s 3D printing and 老骚老b老太太 machining services page to learn more and get started on your project today.

The post How PCBWay’s 3D Printing and 老骚老b老太太 Services Are Shaping the Future of Manufacturing appeared first on 猪泡泡影院 – 3D Printing, Scanning, Design Guides & Forums.

This Guide Covers

• About FLSUN
• FLSUN S1 Specifications
• FLSUN T1 Specifications
• Print Test and Testers
• Conclusion

During the Black Friday and Cyber Monday sale events this year, FLSUN launched the preorder of the S1 and T1, and the global presale total amount exceeded $2,100,000 with 2,000 machines sold in just a week.

Official Website

About FLSUN and 3D Printers

The Chinese 3D printing company behind the FLSUN brand was established in 2015. They specialize in research and development (R&D), production, and sales of 3D printers and 3D printing technology solutions. They became widely known for their V400 and SR Delta 3D printers just recently. Following the success of the V400 machines, FLSUN 3D printers are now exported to more than 150 countries worldwide, with warehouses in the USA, Europe, and other regions. Apart from products, they also provide 3D printing services and help in implementing 3D printers in factories.

It’s known that Klipper firmware features like Input Shaping and Pressure Advance greatly improve the quality of prints that are printed at high speeds. As Delta printers are speedy due to their mechanical properties, the implementation of these features helped FLSUN to achieve even faster record-breaking speeds.

Even though the S1 and T1 are mostly building on the success of the previous generation machines, the new offered Max Speed of the S1 is astonishing. Seeing a Benchy printed in less than 8 minutes is very impressive.

– Enclosure. Apart from new speed limits, there are a lot of great features that accompany both S1 and T1 machines. Both machines will come with enclosed chambers, and the S1 will even have a built-in filament dryer. Both features can greatly impact print quality. An enclosure greatly helps materials such as ABS, for example, against warping, while the filament dryer ensures the material is in the best condition for high-flow 3D printing.

– Price. The price difference between the machines is quite steep. We see that the feature-rich S1, depending on the campaign, costs nearly 2.5 times more, namely $1,299 vs $499. Nevertheless, the T1 still has the major features such as improved printing speed limits, an enclosure, a high-flow hotend, auto-leveling, and even a camera for remote monitoring and time-lapse recording.

FLSUN S1 Specifications

Print Speed: 1200mm/s Max Speed
Large Build Volume: Ø320mm * 430mm
Hotend Max Temperature: 350°C
Please find the full parameters in the image below or at the end of the official product page

Price: $1,499.00 Sale price $1,299.00
Product Affiliate Links:

Official Website

FLSUN T1 Specifications

Print Speed: 1000mm/s Max Speed
Build Volume: Ø260mm * 330mm
Hotend Max Temperature: 300°C
Please find the full parameters in the image below or at the end of the official product page.

Price: $599.00 Sale price $499.00
Product Affiliate Links:

Official Website

Print Test and Testers

While the public awaits more independent 3D printer reviews, FLSUN has already picked an S1 beta tester on Reddit. In order to compete, testers had to go through a detailed survey. Hopefully, we will soon find more in-depth reviews in the wild.

– Promotional Testing. As we closely follow FLSUN on their social media, one of the posts featured a Benchy printed at high speeds. FLSUN shared the post on Twitter/X, where the Benchy was printed in 7 min 48 sec.

Here is a popular promo video that generated more than half a million views in a few weeks.

Conclusion

It’s no surprise that Delta 3D printers, owing to their mechanical properties, are faster than box-shaped bed slingers or CoreXY 3D printers. Their ability to achieve such high speeds certainly draws attention, especially as numerous brands have entered the ‘speed race’ this year. It’s reassuring to see significant developments across different types of machines, making the FDM 3D printer market diverse and rich in innovation.

The post FLSUN S1 and T1: High-Speed Delta 3D Printers appeared first on 猪泡泡影院 – 3D Printing, Scanning, Design Guides & Forums.