I’ve finished my prints on the ADX5. Out-of-the-box quite good quality, after some unlogical quirks in the setup. First print nearly perfect and FAST, but wrong leveling due to wrong predefined bed type – ok.

First multi-color print on the ADX5 in PLA from different vendors: Kobayashi Fidget Cube, https://www.thingiverse.com/thing:1790624, split with Meshmixer (according to AI, this Orca-Version can’t split for coloring, as it sets all Z-hights to zero).

Slicer calculated 44 grams, print results to 40 grams – and 154 grams color changing waste piling up behind the printer. BIG problem.

Problems with under-extrusion here for 3 of 4 filaments, even small missing areas. Would like to calibrate the printer, but 《少妇交换做爰6 obviously removed these features from their version of Orca.

Another annoyance: Each time you switch computers, you have to rebind Orca with your 《少妇交换做爰6 account, breaking the other connection.

You are very welcome the AD5X is an amazing printer especially if you use TPU

Thanks for the review.