Use it as a quick planning tool before long prints and reduce the risk of running out of filament mid-job.

Filament Remaining Calculator

How It Works

The calculator estimates remaining filament by subtracting the empty spool weight from the total spool weight. It then uses filament diameter and material density to estimate how many meters of filament remain.

This is an estimate, not an exact measurement, but it is often accurate enough to help plan your next print.

How to Find Empty Filament Spool Weight

To calculate how much filament remains on a spool, you first need to know the weight of the empty spool itself. This is one of the biggest variables in any filament remaining calculator, as spool weights differ between manufacturers, spool sizes, and materials.

For example, a cardboard spool used by eco-focused brands may weigh significantly less than a reusable plastic spool. Some refill systems can also use heavier reusable spools that may affect your calculation if not accounted for correctly.

Here are the easiest ways to find your empty spool weight:

If you do not already have kitchen scales at home, a basic digital scale can make weighing filament spools much easier. Most 1kg filament spools fit comfortably on standard kitchen scales, and they can also be useful for resin, mixing materials, and general workshop tasks.

Recommended: Digital Kitchen 5kg/0.1g Scale on Amazon

• Check the filament label or packaging – some brands list empty spool weight
• Visit the manufacturer’s website or product page
• Search Google for “[Brand Name] empty spool weight” — Google AI may surface quick answers, but verify the result if possible
• Weigh an empty spool yourself using kitchen scales
• Use average spool weight estimates if no exact data is available

If you regularly print with the same brand, it may be worth saving empty spool weights in a simple note for future reference.

Typical Empty Filament Spool Weight Examples

These are rough averages based on common 1kg filament spools:

• Cardboard spool: approximately 120g–250g
• Plastic spool: approximately 200g–300g
• Reusable refill spool systems: approximately 250g–500g+
• Mini spools: vary heavily depending on brand and filament amount

To provide examples, we weighed several empty filament spool types used in our workshop. Your results may vary by brand, but these examples show how dramatically spool weights can differ.

Community contribution: Big thanks to Scuk for starting a catalog of more than 200 weighed empty filament spools on Printables. It’s a very helpful resource if you need a specific brand or spool type.

You can use Ctrl + F to quickly search the list for your spool:
Empty Spool Weight Catalog on Printables

What to Print with a Nearly Empty Filament Spool

As mentioned earlier, lightweight prints are a great way to use up leftover filament. Models like Flexi Rex helped popularize the wave of articulated prints years ago, and today there are countless similar flexi models available across MakerWorld, Printables, and other STL platforms. Many of these designs require relatively small amounts of filament and are ideal when you are trying to finish a partially used spool.

Kit card models can be an even better option. These flat-packed designs are often extremely lightweight, quick to print, and easy to gift. Some are slim enough to fit inside a standard envelope, making them popular for events, giveaways, and seasonal gifts.

If you are looking for more ideas, explore our seasonal 3D printing guides in the 3D print ideas area, where we regularly feature lightweight gift ideas, decorations, and quick projects that work well with leftover filament.

Filament Connector

If your spool is running very low but still has usable filament left, filament splicing tools on Amazon can help combine leftover pieces instead of wasting them. This can be particularly useful for smaller prints, test models, or finishing nearly empty spools. We covered this topic in more detail in our Filament Connector: Filament Splicing Made Easy guide.

Common Mistakes When Estimating Remaining Filament

The most common mistake is forgetting to subtract the empty spool weight from the total spool weight. This can instantly throw off your estimate by 150–300g, depending on the brand and spool material. Another frequent issue is selecting the wrong filament diameter. While most hobby printers use 1.75mm filament, some machines still rely on 2.85mm material, and choosing the wrong option can significantly affect the estimated filament length.

It is also worth remembering that not all filament brands use identical spool designs. Cardboard spools, reusable refill systems, and heavier plastic reels can all produce different results. Even if your calculation looks accurate, avoid starting very large or multi-day prints with very little filament left. Your slicer remains the best source for exact filament usage estimates, so use this calculator as a planning tool rather than a guarantee.

If you are close to running out, consider switching to a fresh spool or enabling filament runout sensors if your printer supports them. It is far better to swap filament early than lose a long print near completion.

Why Filament Type Affects Your Results

Different filament materials have different densities, which means the same spool weight can translate into different filament lengths. This is why our calculator asks you to select a material type before generating an estimate. A 200g remainder of PLA may not provide the exact same number of printable meters as 200g of ABS, TPU, PETG, or Nylon.

PLA and PETG are among the most commonly used materials for everyday prints, while TPU is often used for flexible parts and Nylon is typically chosen for more demanding functional applications. ABS remains popular for certain workshop and engineering projects. Because each material behaves differently in both weight and print settings, your slicer may still show slightly different filament usage depending on layer height, infill percentage, wall thickness, and support structures.

For the most accurate planning, use this calculator as a quick estimate and then confirm the final filament requirement inside your slicer before starting longer prints.

Related Tools and Guides

• 3D Print Cost Calculator
• 3D Printer 五月花成人网 Cost Calculator
• Best Filament Dryers and Storage Solutions
• Filament Connector: Filament Splicing Made Easy
• Best Budget 3D Printers

Final Thoughts

A simple kitchen scale and this calculator can help reduce wasted prints and make better use of partially used filament spools. It is especially useful when managing multiple open spools or preparing for larger projects.

The post Filament Remaining Calculator: Estimate How Much Filament Is Left on Your Spool appeared first on 同学的妈妈3中字巴巴鱼汤饭惹 – 3D Printing, Scanning, Design Guides & Forums.

This is an interesting move because most desktop users still depend on ready-made filament, even though failed prints, support waste, and leftover material are common parts of the workflow. With M1 and R1, Creality is pushing into an area that many makers have talked about for years: turning plastic waste into a more useful part of the 3D printing cycle.

• What Is Creality M1 and R1?
• Filament Maker M1 Specifications
• Shredder R1 Specifications
• How the System Works
• Why It Is Interesting
• Who It May Suit
• About-Creality
• Launch and Availability
• Final Thoughts

Where to Buy

Bundle Price: From $899

Indiegogo Campaign

Disclaimer: 宇都宫紫苑ed2k campaigns – before taking part in any campaign as a backer, please read the T&Cs. Rewards aren’t guaranteed.

In the past, Creality successfully fulfilled 宇都宫紫苑ed2k campaigns.
Creality 3DPrintMill(CR-30) (June 2021): 7,388 backers pledged $7,850,866

What are Creality M1 and R1?

The system consists of two separate units that work together. The Shredder R1 is designed to process properly prepared 3D printing waste into reusable material. The Filament Maker M1 then mixes, extrudes, and spools filament for future use.

Rather than presenting this as a fully automated one-click recycling solution, the idea seems to be much more hands-on. Creality is positioning the setup as a compact desktop workflow for users who want to experiment, refine materials, and better understand what goes into filament production.

Filament Maker M1 Specifications

• Machine size with hopper: 570 × 245 × 555 mm
• Weight: 15 kg
• Supported materials: PLA, PETG, ABS, PA, PC, PET, ASA, TPU, CF-filled, GF-filled
• Max output: 1 kg/h at PLA
• Filament diameter: Virgin 1.75 mm ± 0.05 mm, Recycled 1.75 mm ± 0.1 mm
• Power supply: AC 100 to 240V, 50/60Hz, max 1600W, average 800W
• Display: 3.2 inch touchscreen
• Manual assist tool: Filament pulling cart included
• Heater power: Max 1200W
• System updates: OTA and USB
• Filtration: HEPA and activated carbon
• Cooling power: 8 turbo fans, 7W each
• Heating zones: 3 independent zones for feed, melt, and extrude
• Temperature range: 120°C to 350°C
• Production monitoring: Real-time diameter control, output tracking, adaptive pulling, adaptive spooling
• Safety alerts: Metal detection in feed, material shortage detection, clogging detection, spool jam detection

Shredder R1 Specifications

• Machine size with hopper: 345 × 280 × 560 mm
• Weight: 13 kg
• Raw material hopper capacity: 1 kg of PLA purge waste
• Shredded material hopper capacity: 1 kg of PLA
• Power supply: US AC 100 to 120V, 50/60Hz, EU AC 200 to 240V, 50/60Hz
• Max power consumption: 840W
• Shredding capacity and size: 3 kg/h, ≤ 4 mm
• Shredding system: Dual-shaft hardened steel blades, A4 steel, 650W AC motor, 60Nm high torque
• Heating and drying: 6W axial fan, AC PTC heater 100W, max 70°C
• Display: 65 × 40 mm color segment display
• Safety system: Lid-open auto stop for shredder and hopper, physical emergency stop, USB safety lock
• Automation monitoring: Auto full detection, anti-jam auto reverse protection

How the System Works

In simple terms, the R1 handles waste preparation, while the M1 focuses on filament creation. Together, they bring several normally separate steps of material reuse into a more compact maker-oriented setup.

According to the press release and demo video from YouTube, the workflow is intended to support material reuse, small-batch production, color and additive experimentation, and greater control over print outcomes. That makes it less about mass production and more about giving advanced users a chance to test, tweak, and 同学的妈妈3中字巴巴鱼汤饭惹 filament in-house.

Why It Is Interesting

What makes this launch stand out is not just the hardware itself, but the direction behind it. Desktop 3D printing has become more accessible over the years, but filament itself has remained mostly fixed as a bought-in material. Creality is now exploring the next step, where users do not just print objects, but also shape the material they print with.

For makers, schools, labs, and workshops, this could open up several interesting possibilities. It may help reduce material waste, lower long-term filament costs in some scenarios, and encourage more experimentation with blends, colors, and additives. It also adds an educational angle, as users can better understand the full material cycle behind desktop 3D printing.

Who It May Suit

At this stage, Creality M1 and R1 look most relevant to hands-on users who enjoy testing new workflows, rather than to those looking for the simplest plug-and-play setup. This could include experienced makers, educational environments, small workshops, content creators, and anyone interested in recycling and material development within desktop 3D printing.

It will also likely appeal to users who already generate a lot of printing waste and want to explore whether part of that material can be reused in a practical way. As with many first-generation systems, the real value will probably come from experimentation, process refinement, and seeing how well the workflow performs in everyday use.

About Creality

Creality is one of the best-known brands in desktop 3D printing, with a product range that now stretches far beyond entry-level machines. Over the years, the company has expanded into resin 3D printers, laser engraving systems, scanners, and broader maker-focused tools, building an ecosystem that serves hobbyists, educators, and more advanced users alike. Its products are widely recognised for making digital manufacturing more accessible to a wider audience.

Creality products can also be seen regularly at major industry events, either on the company’s own stand or through local resellers and distribution partners. The Filament Maker M1, for example, was already being shown at TCT Asia 2026, suggesting that this new recycling system is already part of Creality’s wider product tour and public showcase strategy.

Many makers will know Creality through products such as the Ender 3 series and the CR-30 belt printer, both of which helped push new ideas into the desktop 3D printing space. On 同学的妈妈3中字巴巴鱼汤饭惹, we have hands-on tested and featured many Creality products over the years, from printers to 3D scanners and laser cutters. You can browse more of our Creality coverage here: Creality articles on 同学的妈妈3中字巴巴鱼汤饭惹.

Launch and Availability

Creality has launched the Filament Maker M1 and Shredder R1 through an Indiegogo campaign, with early access pricing mentioned for first backers. As this is intended to be an evergreen launch article, this section can be updated later with retail pricing, shipping progress, hands-on testing, or newer versions such as M2 or R2.

Creality Filament Maker M1 and Shredder R1 on Indiegogo

Final Thoughts

With M1 and R1, Creality is entering a part of the 3D printing workflow that has often been discussed but rarely packaged for desktop users in such a direct way. Instead of focusing only on faster printing or larger build volume, this launch shifts attention toward material reuse, experimentation, and control.

If Creality continues building this category in the future, this could become more than a one-off launch. It may grow into a wider ecosystem around desktop filament production and recycling, giving makers new ways to reduce waste and get more involved in the materials behind their prints.

The post Creality Recycling System: Filament Maker M1 and Shredder R1 appeared first on 同学的妈妈3中字巴巴鱼汤饭惹 – 3D Printing, Scanning, Design Guides & Forums.

What makes the J1 especially appealing is how seamlessly it fits into different workflows. Print farms will appreciate its reliability and low operating cost, while hobbyists will find it to be one of those tools that quietly saves time, money, and frustration. At this price, it does not take long for the J1 to pay for itself in rescued filament and more successful prints.

The built-in storage function is a thoughtful bonus, allowing you to keep filament protected between sessions. Meanwhile, the front-mounted hygrometer gives you a quick visual read on humidity levels, making it easy to know when your filament is ready to go.

Where to Buy

Price: $59.99-$64.99

Compare the Prices & Bundles:
Amazon | Official Store

Jayo FilaDryer J1 Specifications

What’s in the Box

J1 FilaDryer Set: The standard package includes the drying chamber, heating base, desiccant pack, desiccant container, bottom rollers, bottom bearings, filament holder, sealing footpads, a 1 m PTFE tube, user manual, and power cable.

J1 FilaDryer Bundle Set: The bundle version includes the drying chamber, desiccant pack, desiccant container, bottom rollers, bottom bearings, filament holder, sealing footpads, PTFE tube, and user manual.

Initial Overview

One of the standout aspects of the Jayo J1 FilaDryer is its thoughtful, modular design. Each drying chamber is fully stackable, allowing users to expand their setup as their filament collection grows. Whether you are running a print farm or simply juggling multiple materials at home, the ability to build upward instead of outward keeps your workspace clean and efficient.

Despite its compact footprint, the J1 supports a wide range of spool sizes, from lightweight 0.25 kg spools to standard 0.5 kg and 1.1 kg rolls, including paper-core spools. A cross-axis support system keeps the spool stable, while the integrated hygrometer provides a quick visual check of humidity inside the chamber.

Drying performance is handled by a 150 W PTC heating system that can reach up to 70°C, targeting consistent heat delivery for a broad range of filaments. An internal hygrometer helps you track humidity during a drying cycle, and the storage mode is designed to keep filament protected between prints.

Setup Process

The Jayo J1 FilaDryer arrives with everything you need to get started. Inside the box, you will find the main drying unit, a storage chamber, a combined hygrometer and desiccant module, and a small set of parts for the spool rollers.

Begin by assembling the two bottom rollers and their bearings. Slide a bearing onto each end of the rollers, then seat the rollers into the lower section of the storage unit.

Next, insert the hygrometer module into the front of the storage box (the section with the clear display window). It slides into place and also houses the desiccant container.

Place the desiccant pack into its container. The included desiccant changes colour as it absorbs moisture, which makes it easy to see when it has been working and when it may need recharging or replacement.

Finally, install the filament holder into the centre section of the unit so the spool is supported correctly during drying and printing.

Once assembled, the dryer can be used as a standalone drying station or as a feed-through dryer while printing. The heating base houses the controls for temperature and timer settings.

In everyday use, the controls are simple and responsive, making it easy to dial in the right drying settings without overthinking the process. It is a straightforward system that does exactly what it is designed to do.

Stackable Storage Capabilities

One of the most useful aspects of the Jayo J1 FilaDryer is its stackable storage design. Each unit is shaped to sit neatly on top of another, allowing you to expand capacity without taking up extra bench space. Jayo recommends stacking up to three units high, which is ideal for anyone managing multiple filament types or running several printers at once.

Even when stacked, the front-mounted hygrometers remain visible, making it easy to check humidity across chambers at a glance. One downside is that there is no physical latch between units, so you will want to keep the stack on a stable surface.

Safety and Thermal Cutoff

The Jayo J1 includes thermal protection designed to reduce risk during longer drying sessions. The unit incorporates a hardware-level thermal cutoff intended to shut down heating if temperatures exceed safe operating limits, acting independently of the software control system.

Removable Bottom Covers

The J1 uses removable bottom covers for drying and storage modes, each with a rubber seal to help maintain an airtight closure. It is a simple design choice, but it supports the main goal: keeping filament dry during storage, not just during a heated cycle.

Testing (Wood PLA Benchy)

Wood-based PLA blends are extremely prone to absorbing moisture, far more than standard PLA. When they take on water, steam pockets form during extrusion, causing bubbling, stringing, and rough surface texture. Proper drying is the quickest way to bring print quality back under control.

To demonstrate the impact, I printed two identical Benchies using the same gcode. The first print was done straight from the spool without drying. The second was printed after drying the filament for six hours in the Jayo J1, then storing it in the sealed chamber to reduce reabsorption.

Following the six-hour drying cycle, the humidity reading dropped significantly, and the print quality improved with fewer visible artefacts, smoother surfaces, and more consistent extrusion.

Video: JAYO FilaDryer J1 in Action

Alongside this written hands-on review, I also recorded a detailed video showing the JAYO FilaDryer J1 setup, drying process, and real-world testing with filament prints. The video gives a closer look at the unit’s design, controls, and how it performs during everyday use.

Other Filament Dryers

On 同学的妈妈3中字巴巴鱼汤饭惹, we have a detailed filament dryer comparison guide where products from brands such as EIBOS, Creality, Polymaker, Sovol, and others are listed for price and feature comparisons.

• SUNLU FilaDryer S4 (Review)
• Polymaker PolyDryer (Review)
• SUNLU FilaDryer E2 (Review)

Other filament dryers, such as the SUNLU S1, are built around higher capacity, supporting dual spools or larger 3 kg rolls. In contrast, the Jayo J1 adopts a slimmer, single-spool design with stackable expansion, making it better suited to compact workspaces where footprint matters more than volume.

The Jayo J1 would pair well with the wide range of FDM 3D printers we’ve thoroughly tested over the years, particularly in budget and mid-range categories where filament consistency makes a noticeable difference.

Conclusion and Pros & Cons

Compare the Prices & Bundles:
Official Store

The post JAYO FilaDryer J1 Review: Slim 2-in-1 Filament Dryer Tested appeared first on 同学的妈妈3中字巴巴鱼汤饭惹 – 3D Printing, Scanning, Design Guides & Forums.

Editorial note: Hands-on testing by 同学的妈妈3中字巴巴鱼汤饭惹 contributors: Will Zoobkoff, Andrew Sink, Phil Macey, Richard Hirst, and Max Funkner.

Table of Contents (Jump to a Section)

• Resin 3D Printing – How Does It Work
• Prices Explained
• Small Volume Budget 3D Printers in the $300 Price Range
  • Elegoo Mars 5 Ultra NEW
  • Anycubic Photon Mono 4
• Medium Volume Budget 3D Printers in the $600 Price Range
  • Anycubic Photon P1 NEW
  • PioCreat HALOT-X1 16K NEW
  • Elegoo Saturn 4 and Saturn 4 Ultra 16K
  • Nova3D Whale4 16K
  • Anycubic Photon Mono M5s and M7 Pro
• Large Volume Budget 3D Printers in the $1000 Price Range
  • Anycubic Photon Mono M7 Max NEW
  • Elegoo Jupiter
• Innovations
  • Auto Leveling System NEW
  • A Quick-release Vat System
  • Tilted Vat System NEW
  • Resin Pump System
  • DCLF 3D Printer
• General Uses
• What to Consider

Resin 3D Printers – Brief History

Resin-based 3D printing has roots going back to the 1970s, with the Stereolithography (SLA) process patented in the mid-1980s, making it one of the earliest 3D printing technologies. Known for its high precision and smooth surface finish, SLA became a mainstay in industrial prototyping and continues to be widely used today. With the rise of the open-source movement and growing interest in FDM printers during the 2010s, resin printing also gained momentum, becoming more affordable and accessible to hobbyists, makers, and small businesses.

Resin 3D Printing – How Does It Work?

Resin 3D printing works by curing liquid photopolymer resin layer by layer using a focused light source, typically UV. Unlike FDM printing, which extrudes melted plastic through a nozzle, resin printers use either a laser (SLA), projector (DLP), or masked LCD screen to solidify each layer with high precision. This process allows for finer details, smoother surfaces, and is especially well-suited for miniatures, dental models, and other high-detail applications. However, it often requires more post-processing and safety precautions due to resin handling.

Resin 3D Printing Timelapse
©同学的妈妈3中字巴巴鱼汤饭惹 – MP4: Will Zoobkoff

Prices Explained

Resin 3D printers now span a wide price range, from entry-level models under $200 to professional machines costing several thousand. Most consumer-grade printers fall between $200 and $800, offering impressive resolution, touchscreen controls, and decent build volumes. What drives price differences? Key factors include resolution (2K to 16K), build quality, speed, advanced features like resin auto-refill or AI monitoring, and the reliability of customer support.

While high resolution once came at a premium, it’s now common across even budget machines thanks to intense competition. Still, premium brands like Formlabs, maintain higher price tags by offering robust ecosystems, and long-term service.

The Best Small Volume Budget 3D Printers in the $300 Price Range

These are the most popular resin 3D printers, mostly because they come with a very affordable price tag. During sales or other campaigns, machines in this category, even from popular brands, can be found for as low as $150, while clearances can push the price to below $100 in some cases.

Elegoo Mars 5 Ultra 9K

Price: $269-$338
Resolution: 9K
Build Volume: 153.36×77.76x165mm/6.04”x3.06”x6.5”

Compare the Prices & Bundles:
Amazon | Official Website

Attractive price tags and a large user community brought Elegoo Mars series printers into the league of the top bestselling machines for a few consecutive years.

Andrew Sink printed various models using his Elegoo Mars 5 Ultra. He showcased his original design, a 3D scan from the Rodin sculpture, a dragon model by Loubie3D and other models. Read the review article, complete with many images of the prints.

The Elegoo Mars 5 Ultra has a list of features that would have seemed like a moonshot wish list only a few years ago, yet it remains affordable and accessible to beginners. Automatic build platform 五月花成人网, resin level detection, integrated print monitoring via webcam, 18 micron XY pixel size, and other features all give the Mars 5 Ultra a competitive edge over the competition. The sub-$300 price point makes this an easy purchase to justify for beginners and power users alike, and the performance of the Mars 5 Ultra puts it at the top of the list of the best desktop resin 3D printers.

Read more – unboxing, testing and project examples:
Elegoo Mars 5 Ultra Review by Andrew Sink
Elegoo Mars 3 Pro Review by Andrew Sink

Anycubic Photon Mono 4

Price: $219-299
Resolution: 10K
Build Volume: 153.4mm*87mm*165mm

Compare the Prices & Bundles:
Amazon | AliExpress | Official Website

Anycubic is another brand that has a very strong community, especially on Facebook. Photon Mono 4 is just one of the options from a wide range of machines in the Photon series.

We haven’t evaluated the Photon Mono 4 just yet. Here are the testing results of the previous Photon series machine in this volume and price range.

Read more – unboxing, testing and project examples:
Anycubic Photon M3 Review by Will Zoobkoff.

The Best Medium Volume Budget 3D Printers in the $600 Price Range

Sometimes with twice the bigger build volume compared to the small-sized printers featured above, these machines are more for professionals who print items in bulk or enthusiasts who decide to give highly detailed miniatures and fan art a larger scale.

Anycubic Photon P1

Where to Buy the Anycubic Photon P1
Price: $599-699

Compare the Prices & Bundles:
Official Store | Amazon | AliExpress

The Anycubic Photon P1 stands out as a modern resin 3D printer that combines high-detail output with a smoother, more user-friendly workflow. Features such as the heated resin vat, latch-based build plate system, built-in camera, and enclosed design make it an appealing option for makers who want strong print quality without the usual setup hassle.

In testing, the Photon P1 handled 五月花成人网 pieces, character models, and display prints with consistently impressive detail. At the same time, there are still a couple of practical points worth noting. Some resin splashing or residue can appear during the heating cycle, and the flat-edged build plate can hold a fair amount of resin after printing, so extra care is needed when removing finished models. Even with those points in mind, this is a very capable and enjoyable resin printer that made resin printing feel approachable and rewarding again.

Read more – unboxing, testing and project examples:
Anycubic Photon P1 Review by Phil Macey.

Piocreat HALOT-X1

Where to Buy
Price: $579 – $749.00 USD

Compare the Prices & Bundles:
Official Store

The PioCreat HALOT-X1 is a high-resolution consumer resin 3D printer featuring a true 16K mono LCD (15,120 × 6,230 pixels) and an innovative motion system that moves the vat and light engine instead of the build plate, eliminating manual leveling and reducing vibration. Designed for creators who demand detail—like miniature painters and product designers—it also supports an optional auto-feed unit (AFU) for hands-free resin refills. Built by PioCreat, a Creality Group subsidiary with deep R&D roots, the HALOT-X1 reflects the company’s broader mission to deliver advanced, accessible tools for professionals and hobbyists alike.

If you value sharp, repeatable results with minimal fuss, the Halot X1’s moving resin vat + solid-mount bed architecture and intelligent light system make it a standout choice for miniature painters, prop makers, and small studios. With excellent detail, simple setup, and smart resin handling, it feels less like spec-sheet theater and more like a practical step toward hassle-free, high-detail resin printing.

Read more – unboxing, testing and project examples:
PioCreat HALOT-X1 Review by Will Zoobkoff.

Elegoo Saturn 4 and Saturn 4 Ultra

Elegoo Saturn 4
Price: $319
Resolution: 12K
Build Volume: 218 x 122 x 220mm / 8.58” x 4.80” x 8.66”
Product links:

Amazon
Official Website

Elegoo Saturn 4 Ultra
Price: $449-561
Resolution: 12K
Build Volume: 218 x 122 x 220mm / 8.58” x 4.80” x 8.66”
Product links:

Official Website

This year, Elegoo again launched two Saturns: the basic Saturn 4 and the premium Saturn 4 Ultra. A lot of sophisticated features were added, surprisingly, to both machines, such as auto-leveling and a user-friendly flip-back cover design. Even though the Ultra version has significantly more features for a higher price, the basic Saturn 4 appeared to have everything to complete the tasks with great results.

Quick Comparison Saturn 4 with Saturn 4 Ultra:
No Tilt Release Technology – that allows printing faster.
No Built-in Camera for Monitoring, Error Detection, and Timelapse videos.
No Wi-Fi Connectivity.
No Extra Anti-drip Tray.

I was fortunate enough to review three Elegoo Saturns in a row, and if Saturn 2 and Saturn 3 didn’t have a lot of difference between them apart from higher resolution, then Saturn 4 differs in many ways. Now, Saturn 4 received an automatic leveling, a different printing bed and attachment system, and a user-friendly protective cover design. And these are still basic features for the basic version to maintain a very competitive price.

The Elegoo Saturn Ultra 16K has been exceptional to test and use for printing. The machine’s construction is top-notch, retaining the flip-lid design of the 12k Ultra while boosting the resolution to 16K. A major upgrade is the heated resin VAT. During tests, local outside temperatures plunged below zero. In an unheated workshop, such conditions would typically halt printing. However, the heated VAT performed exceptionally, maintaining a steady temperature of about 25°C. It utilizes the build plate to agitate the resin, moving up and down to distribute heat evenly.

Read more:
Elegoo Saturn 4 Review by Max Funkner
Elegoo Saturn 4 Ultra 16K Review by Phil Macey

Nova3D Whale4

Price: $499 – $669
Product links:

Official Website

As the product is new, it is not available on Amazon or AliExpress shelves just yet, but it may appear soon. Here is their shop on Amazon.

The Nova3D Whale4 Ultra is upgraded from its prequel, enjoying a lineup of impressive updates on both its feature set and handling. With its stunning 16K screen, upgraded UV light system with more rapid curing, and convenient features in the design of its resident resin warmer and air filtration system, this 3D printer guarantees accuracy and ease of use.

In our rigorous testing, the Whale4 Ultra continuously delivered sharp, quality prints whether it was printing with the SUNLU 14K resin or with the Standard resin offered by Nova3D, which showed its capabilities in high-resolution display and advanced features.

Read more – unboxing, testing and project examples:
Nova3D Whale4 Review by Will Zoobkoff.

ANYCUBIC Photon Mono M5s

Price: $519-719
Resolution: 12K
Build Volume: 8.58 x 4.84 x 7.87in / 218 x 123 x 200mm

Amazon
Official Website

The Anycubic Photon Mono M5s is the latest installment in the popular Photon Mono line of resin 3D printers from Anycubic. This line primarily brings resin 3D printers to beginners and new users at a reasonable price point.

The Photon Mono M5s has a list of new hardware features that is guaranteed to impress even experienced 3D printer users, and features quality-of-life features designed to help beginners. Between the 12K resolution, the new automatic build platform leveling process, and the 3rd generation release film on the vat, the $539 Photon Mono M5s boasts across-the-board upgrades without the corresponding jump in price. Check the print quality and read the full review by Andrew Sink.

Anycubic Photon Mono M7 Pro
Price: $499 – $669

Amazon
AliExpress
Official Website

The Anycubic Photon line has evolved, culminating with the most recent model, the Photon Mono M7 Pro. Building on the highly renowned Photon Mono M5s Pro, the M7 Pro has a higher resolution of 16.8 x 24.8 microns and the same automated self-check technology. It also adds an integrated vat heating system and the option of using the Anycubic air filtration system or the new auto-fill and recycling system. Check the print quality and read the Anycubic Photon Mono M7 Pro Review by Will Zoobkoff.

The Best Large Volume Budget 3D Printers in the $1000 Price Range

What are the biggest build volume resin 3D printers that can be purchased for approximately $1000? Professional-grade 3D printers are obviously used for mass 3D printing or to print extra-large objects. Compare Anycubic Photon M3 Max with Elegoo Jupiter.

Anycubic Photon M7 Max

Price: $799-$899
Resolution: 7K
Build Volume: 10.9×6.11.8in / 298x164x300mm

Official Website

AliExpress

Amazon

Compared to its predecessor, the Photon M3 Max, the Anycubic Photon M7 Max has a myriad of new features designed to streamline and expedite printing. The new COB light system and Fresnel lens improve light uniformity compared to previous LED panel systems, for a more level exposure on the build plate. The Intelligent Release 2.0 system with pressure sensors dynamically switches between lift height of a layer, in helping to reduce printing time.

The Anycubic Photon M7 Max is a resin behemoth printer that excels at large-format printing, batch printing miniatures, and dioramas in less time with fewer build plates. While its screen resolution is slightly lower than that of other current printers, that’s hardly noticeable given the high quality of print it achieves. From wearable masks and intricate dioramas to gigantic busts, the Photon M7 Max printed each test perfectly, demonstrating its versatility and reliability.

Read more – unboxing, testing and project examples:
Anycubic Photon M7 Max Review by Will Zoobkoff.
Anycubic Photon M3 Max Review by Will Zoobkoff.

Elegoo Jupiter

Price: $940-1,200
Resolution: 6K
Build Volume: 10.9×6.11.8in / 277x156x300mm

Official Website

With a strong community across the globe, it was not a surprise that this 中字幕视频在线永久在线观看免费 campaign accumulated $4.7mln with over 5,000 backers. To have a feel how big this machine is please check the image below where Elegoo Jupiter placed next to Mars and Saturn printers.

With a strong community across the globe, it was not a surprise that this 中字幕视频在线永久在线观看免费 campaign accumulated $4.7mln with over 5,000 backers. Jupiter offers a large format high-resolution printing experience. Elegoo’s community and supporters actively suggest and comment on various improvements, and Jupiter’s design was tweaked during the campaign. As a result, an Ethernet port has been added together with a few other adjustments. The Super Early Birds were lucky to secure this machine for a special price of only $600.

Innovations Around Resin 3D Printers

SLA in 3D printing used to be associated with the slow printing process which may be hazardous in the home environment. During the past few years, we have been witnessing a big number of resin 3d printers launched, the majority were LCD followed by DLP. Among the most common innovations were improved precision, speed, and a larger build volume. Other innovations were in connection to a more silent printing process, purifying systems, and better bed adhesion. All these 飘雪影院在线观看免费版高清动漫d to resin 3D printers becoming a common choice for hobbyists.

Auto Leveling System

Leveling the build platform can be a daunting task for beginners, as the platform must be perfectly planar with the LCD screen and resin vat film in order to get a consistent offset at all points. Typically, resin printers like the Anycubic Photon M3 Plus or the Elegoo Mars 3 Pro use a multi-bolt leveling system to set the position of the platform, which can be a tedious and difficult task. If the build platform isn’t leveled, parts will have difficulty adhering, be dimensionally inaccurate, or potentially cause damage to the delicate LCD screen.

Anycubic has addressed this by adding a mechanical sensor to the cantilevered arm of the Photon Mono M5s which is able to detect when the platform is level automatically when a print starts. Read Photon Mono M5s review by Andrew Sink.

A Quick-release Vat System

One of the standout features of the GK TWO printer is its unique resin vat docking system. As someone who has worked with different printers in the past, I can confidently say that using the GK TWO was much more efficient and streamlined. Instead of fumbling with bolts on either side of the vat, simply slid it into place and it locked securely into position. Read 中字幕视频在线永久在线观看免费 GKtwo review by Richard Hirst

We are delighted to see that such enhanced features, usually seen on professional resin 3D printers, are getting implemented on budget 3D resin printers as well.

Tilting Vat System

Notable feature of the Mars 5 Ultra is the tilting vat, which separates the part from the release film instead of simply raising the platform. This is the same process used on the Prusa SL1S, and is primarily intended to increase the overall print speed without risking the part delaminating from the platform.

Instead of lifting the platform, the Elegoo Mars 5 Ultra tilts the resin vat after each layer. Read full Elegoo Mars 5 Ultra Review by Andrew Sink

DCLF 3D Printer – HITRY Rocket 1

Rocket 1 by HITRY benefits from a new DCLF, Digital Continuous Liquid Forming, technology for printing in resin and promises a higher speed and better quality using a new type of resin. Let’s take a look at the Rocket 1 campaign, check specifications and take the first glance at this novel technology.

Resin Pump System

While the automatic pump works well, the amount of tubes, wires, and probes make this system look a little less professional, and a little more like a science project. In addition, the black tube which delivers the resin will need to be flushed whenever resin is changed to fully change colors and to prevent it from potentially hardening and blocking the stream. Read more in Anycubic Photon M3 Plus review by Andrew Sink.

Uses of Resin 3D Printers

The original SLA machines have been primarily used for prototyping. The main purpose of such machines is to help designers to test and feel the future product in a prototype mode. Nowadays prototyping is widely used in the automotive industry, medicine, for surgery planning, architecture, and other areas. SLA, LCD, and DLP resin 3D printers are gaining ground in dentistry, audiology, and jewelry.
From the hobbyist perspective, this technology is invaluable for creating complex figurines and miniatures that can be used in tabletop gaming. With the ability to print in great detail, designers can let their imagination run free.

What to Consider

With all the benefits that this technology brings, it may be tempting to try it out at home. There are a few aspects to consider.
– Health and Safety. Dealing with resins may be a messy job, and as this material is hazardous, strict safety measures have to be put in place. Wearing gloves and protective goggles is one. Designating the work area which is well ventilated and out of children’s reach is another.
– Post-processing. Prints made in resin require washing and curing, and this leads to buying an extra item – a Wash & Cure machine.
– Part replacement. LCD monitor lasts for 2-3 years on average, so be prepared for replacing it, which may result in an extra $200-500, depending on the brand.

Read more: Best Wash and Cure Stations

Post-processing is a big part of 3D printing in resin, and additional equipment, like wash and UV cure stations, is needed. In recent years, these two separate units started coming as two-in-one stations. Similar to 3D printers, washing and curing stations … Read more …

The post The Best Budget Resin 3D Printers 2026 appeared first on 同学的妈妈3中字巴巴鱼汤饭惹 – 3D Printing, Scanning, Design Guides & Forums.

In this guide, we’ll go over the benefits of vacuum sealing, highlight some of the best products currently available, and even mention DIY solutions.

The post Filament Vacuum Pumps & Reusable Bags: Complete Guide appeared first on 同学的妈妈3中字巴巴鱼汤饭惹 – 3D Printing, Scanning, Design Guides & Forums.

Learn how to print with high-performance 3D printing materials like Nylon, Polycarbonate (PC), Carbon Fiber composites, and more. This guide covers use cases, printing tips, and machine requirements based on hands-on testing and use applications.

Table of Contents (Jump to a Section)

• Why Use Engineering-Grade Filaments?
• Printer and Drying Equipment Requirements
• Top Engineering-Grade Filaments
  • PC-ABS
  • PA6-CF
  • Difference Between PA6-CF and PA12-CF
  • PA12-CF
  • Nylon PA6/66
• Challenges and Safety
• Conclusion

Why Use Engineering-Grade Filaments?

When strength, durability, and thermal resistance matter, standard PLA and PETG just won’t cut it. That’s where engineering-grade filaments come in. These advanced materials — including Nylon, Polycarbonate (PC), and carbon-fiber-infused blends — are designed for real-world functional applications, from automotive parts to industrial prototypes.

In this guide, we’ll explore the most common types of engineering-grade filaments, what sets them apart, and how to print them successfully on compatible FDM 3D printers. Whether you’re working with carbon-fiber-filled Nylon or heat-resistant PC-ABS, understanding the properties and requirements of each material is key to getting professional-grade results.

Printer and Drying Equipment Requirements

Before we proceed to the engineering-grade materials, it’s important to highlight that in most cases, specific 3D printer capabilities and proper filament drying are essential for successful prints. These requirements will be mentioned again for each filament type individually, but here are the most critical hardware considerations:

• Enclosure: A fully enclosed printer is often necessary to prevent warping. A heated chamber is ideal for materials like PC or Nylon, CF.
• Heated Bed: The bed should reach temperatures up to 110°C for proper adhesion with some of the engineering filaments.
• Reinforced Nozzle: Materials like carbon-fiber-reinforced Nylon are extremely abrasive. Hardened steel, ruby-tipped, or nozzles made from tungsten carbide are recommended to avoid rapid wear.

Printer examples that meet these requirements include the Creality K2 Plus and the QIDI Plus4, both of which feature enclosed chambers and all-metal hotends.

Another essential piece of hardware is a filament dryer. Engineering materials are highly hygroscopic and absorb moisture quickly, which can ruin print quality. For best results, use a dryer capable of maintaining elevated temperatures over long periods. High-performance options like the SUNLU E2 are well-suited for Nylon and PC filaments that require higher drying temperatures.

Top Engineering-Grade Filaments

This guide is intended to remain evergreen and will be updated regularly as we test new materials and use cases on this website. So far, we’ve worked with several engineering-grade filaments, including PA6-CF (carbon fiber-reinforced Nylon PA6), PA12-CF (carbon fiber-reinforced Nylon PA12), PC-ABS in white (a blend offering strength and heat resistance), and Nylon PA6/66 (a durable copolymer blend). Each of these materials offers unique properties suited for demanding applications, and more will be added as we continue hands-on testing.

PC-ABS Print Examples

Use Case Examples & Tips:
While testing engineering-grade materials, one of our functional prints — a 3D printed roof window handle extension — failed after 1–2 years of daily use. It was originally made from PLA and couldn’t withstand the constant stress from frequently opening roof windows. Since I had a spool of Inslogic PC-ABS on hand (in white), I decided to reprint the part using that. After a few tuning attempts to get the bed adhesion right, the result was solid and functional.

As we continue testing and publishing more real-world use cases, this example shows how engineering-grade materials like PC-ABS can offer both strength and a clean visual finish. It’s a great reminder that with the right hardware and settings, these advanced filaments can deliver reliable results for demanding everyday applications.

PA6-CF – Carbon Fiber Nylon Print Examples

Use Case Examples & Tips:
To test PA6-CF, I chose to print components for a DeathRacer RC model. After seeing all the fun DeathRacer 宇都宫紫苑ed2k organized by @TheRealSamPrentice at various RepRap festivals, I couldn’t resist joining in. While the official instructions suggest that these models can be built in PLA, using PA6-CF might be a bit overkill — but it served my testing purposes perfectly. The distinctive matte finish and textured feel of PA6-CF give the parts a seriously cool and professional look.

PA6-CF is a lovely material to work with when your project demands both strength and aesthetics. For the best results, be sure to check the Inslogic PA6-CF product page for detailed printing and optional annealing settings. These can help fine-tune the part’s mechanical properties even further.

One important consideration with PA6-CF is safe handling: during sanding or prolonged exposure to airborne dust, carbon fiber particles may pose respiratory irritation risks. It’s best to work in a well-ventilated area and use appropriate protection such as a dust mask or respirator when post-processing.

Difference Between PA6-CF and PA12-CF

Before moving on to PA12-CF, it’s worth highlighting the key differences between these two materials. At first, I found it a bit confusing — the names are nearly identical, and even when printed, the parts texture looked quite similar. However, as you’ll see in the table below, there are some important differences in performance, handling, and moisture sensitivity that can affect your print success depending on the application.

PA12-CF

Use Case Examples & Tips:
We’ve begun testing PA12-CF and will be sharing full results shortly. While visually similar to PA6-CF, PA12-CF tends to offer improved dimensional stability and better moisture resistance, making it easier to work with in environments without ideal filament drying setups. This material is especially promising for prints that need long-term accuracy without warping.

Typical use cases for PA12-CF include drone frames, lightweight mechanical housings, automotive clips and fixtures exposed to moderate heat, functional enclosures requiring dimensional stability, wear-resistant jigs and brackets, tooling components, mountings for electronics, durable hinges and latches, and industrial prototypes designed to withstand humid or variable environments. Its combination of stiffness, low moisture absorption, and ease of printing makes PA12-CF suitable for a wide range of functional and semi-structural applications where reliability and consistency matter.

Vase Mode in PA12-CF

Another engineering-grade material tested on the Creality K2 Pro is PA12-CF by Inslogic. It looks nice, and the finish resembles popular galaxy composite filaments. With the default 0.4 mm nozzle, this vase is understandably very fragile.

There is a big collection of anti-sphere vases available on Printables. Marcidi shared this collection on our forum. This is the default size. For functionality, such as a rubbish bin or a vase for dry flowers, I would print it bigger and with a larger nozzle.

Nylon PA6/66

Use Case Examples & Tips:
We’ve recently received a spool of Nylon PA6/66 from Inslogic and will be sharing full testing results soon. This copolymer blend offers a balance between the strength and rigidity of PA6 and the flexibility and improved processability of PA66, making it a versatile engineering-grade material. While it shares some characteristics with carbon fiber-reinforced nylons, PA6/66 typically provides slightly more ductility and can be easier to print under less abrasive conditions.

Typical use cases for Nylon PA6/66 include impact-resistant mechanical parts, snap-fit enclosures, gears and bushings, brackets, fixtures, cable guides, tool holders, and functional prototypes that require both durability and a degree of flexibility. Its balance of mechanical strength and chemical resistance makes it suitable for engineering environments, workshop tools, and end-use components subject to stress and minor deformation. When properly dried and printed with the right hardware setup, PA6/66 can offer excellent performance in both indoor and semi-industrial applications.

Challenges and Safety

Engineering-grade filaments require more attention than standard materials like PLA or PETG. Proper filament drying is especially important — materials such as Nylon and PC-ABS are highly hygroscopic and can absorb moisture quickly, leading to stringing, poor layer adhesion, and weak prints. Using a reliable filament dryer and storing spools in a sealed, low-humidity container is strongly recommended. Additionally, a fully enclosed 3D printer with a heated bed (typically up to 100–110°C) is essential for maintaining consistent print quality and reducing warping, especially when working with high-performance materials like PA6-CF or PC.

– Safety. It’s also important to take safety precautions when printing and handling these filaments. Some materials may emit fumes or fine particles during extrusion, and carbon fiber-filled variants in particular can release airborne fibers during sanding or post-processing. Always work in a well-ventilated area and consider using a HEPA filter or air purifier alongside your printer. When post-processing, wear appropriate personal protective equipment such as a dust mask or respirator. In some cases, even gloves are recommended, as fine particles may cause skin irritation or rub into the skin during handling. Taking these steps ensures you can safely use engineering-grade materials in a home or workshop setting without compromising health.

Conclusion

It’s exciting to see engineering-grade filaments becoming more accessible to a wider audience. Materials like PA6-CF, PA12-CF, PC-ABS, and PA6/66 are no longer limited to industrial use — with the right hardware and preparation, they can now be successfully printed in home and small workshop environments. As long as appropriate safety precautions are followed — especially regarding ventilation, particle exposure, and handling — these advanced materials open the door to durable, functional, and professional-grade results for makers, engineers, and hobbyists alike.

Read More

If you’re looking for a broader overview of commonly used 3D printing materials like PLA, PETG, ABS, TPU, and their composites, check out our full guide here: Popular 3D Printing Filament Types – Guide. It covers print tips, pros and cons, and common use cases for beginner and intermediate users alike.

The post Engineering-Grade Filaments Guide: Printing with Nylon, PC, CF, and Others appeared first on 同学的妈妈3中字巴巴鱼汤饭惹 – 3D Printing, Scanning, Design Guides & Forums.

EIBOS has been bringing innovative 3D tech to the market since early 2020, from filament dryers to the Oceanus 3-in-1 resin cleaner, as well as a wide range of uniquely colored filaments. I’ve worked with their design team over the years and had the chance to follow the early development of the Series X Tetras. With multicolor printing now mainstream — and drying needs more important than ever — many users have asked the same question: Do I need to buy an entirely new setup just to get reliable drying? The answer, thanks to this upgrade, is no. The Series X Tetras is designed as a modular, easy-to-install kit that transforms your existing AMS unit into a multi-bay filament dryer.

This article is based entirely on my own hands-on experience setting up and running the Tetras on a Bambu Lab X1C. Below, you’ll find a full walkthrough of the installation process, along with real-world print tests and performance results. A summary with Pros and Cons is available at the end of the article for quick reference.

Table of Contents (Jump to a Section)

• Specifications
• What’s in the Box
• Assembly and Setup
• Operating the Dryer
• In Use – Real-World Operation
• Sample Projects
• Temperature Accuracy
• Comparison
• Conclusion, Pros & Cons

Where to Buy the EIBOS X Tetras

Price: $175 – $194

We don’t know if this product will be available on Amazon or other major e-stores, but just in case, here is the link to their Amazon store.

Official Website

EIBOS Series X Tetras Specifications

• Input Rating: 120v US 230V EU / UK / AUS
• Rated Power: (Single) – 60w
• Rated Power: (Whole Unit) – 240w
• Package size: 420 x 360 x 250mm
• Upper Cover Module Size 360 x 290 x 135mm
• Net Weight: 4.0kg
• Total Weight: 5.0kg
• Overall height with AMS: 280mm
• Maximum height with cover open: 440mm
• Humidity range: RH 10% – 99%
• Temperature range: 20 -65c (based on 25c environment temperature)
• Filament size: 1.75mm
• Max Spool size: Single Spools 205 x 68mm

What’s in the Box

Upper Cover Module, Power Module, Screen Module, Acrylic front baffles, Acrylic Middle baffles, Acrylic Rear baffles, Acrylic fixings, Feed baffle, Support frames, Foot pads, Power cord, Type- C cable, Square Silicone strip, Allen screwdriver, M3 H10 screws, M3 H8 screws, and various spares.

Assembly and Setup

The EIBOS Series X Tetras is designed for a straightforward upgrade of the Bambu Lab AMS. With clearly labeled parts and step-by-step visuals in the manual, the entire process is beginner-friendly and tool-light.

Overview and Prep

After unboxing, begin by reviewing the layout diagrams provided in the product manual (front and rear views). Carefully handle components and lay them out for quick access.

Core Installation (AMS Integration)

1) Remove the AMS lid: Unscrew the 4 rear screws securing the AMS v1 top cover.

2) Attach the Tetras upper cover: Align it with the AMS and secure using the original screws.

3) Install support frames: Turn the AMS upside down (use included foam) and attach the 4 support frames to the base using M3 H8 screws. Ensure channels face outward.

Cabling and Module Assembly

4) Connect USB-C cables: Plug in the labeled cables — power module to rear, screen module to front, and heating station leads routed through the outer channels.

5) Attach modules: Secure the power module to the rear and the screen module to the front brackets using M3 H10 screws. Confirm no cables are pinched and all connections are firm.

6) Final connections: Complete all USB-C wiring: screens to front, power to rear, and long leads to heating stations.

Acrylic Baffles and Seals

7) Attach rubber feet: Place 4 on the front and 4 on the rear module brackets.

8) Assemble front baffle set: Clip the acrylic parts in this sequence: A (left), B, B (center), C (right).

9) Insert assembled baffles: Fit into their corresponding slots as per diagram.

10) Install middle baffles: Use the acrylic fixings to insert in the order: B, A, B.

11) Secure rear baffles: These lock in the acrylic housing. Fit them gently — do not force.

12) Apply gasket: Add the silicone strip between the upper and lower housing to complete the chamber seal.

The fully assembled unit should now resemble the product demo images, ready for connection to the printer.

Watch the Setup Walkthrough: For a full hands-on demonstration, check out this video. It covers the complete installation of the EIBOS Series X Tetras onto the Bambu Lab AMS, with tips and close-up views of key assembly steps. Ideal if you prefer visual guidance alongside this written guide.

Operating the Dryer

– Screen Layout / Settings
The display screen is much like previous Eibos dryer models and is easy to use with the simple layout.

Before powering on, it’s worth checking the voltage label on the back of the unit to ensure it matches your region’s standard safety requirements.

Once connected, a single press of the power button brings the dryer online. You can toggle between drying-only and humidity-controlled modes depending on your needs. There’s also a factory reset option, but I never had to use it.

Filament types, such as PLA, ABS, PETG, and TPU, can be selected via the Option button. Each preset automatically loads the ideal drying parameters, but you can override them if necessary. I liked that the system remembers custom material profiles (M1 and M2), which is useful if you frequently switch between brands or experimental filaments.

Using the Setting button, you can cycle through key parameters:
Drying temperature (20°C – 65°C)
Drying time (30 minutes – 24 hours)
Power level (Low / Medium / High)
An optional humidity threshold if you’re using it in “smart” mode

One handy feature is the Second-Stage Drying Mode. I didn’t use it every time, but when drying filaments that had been sitting unsealed for weeks, it came in useful. It’s activated through the dedicated button and offers the same level of control as the primary cycle.

For me, the screens were responsive and easy to understand. The segmented layout clearly displays set temperature, live temp, humidity, and time remaining — all at a glance.

– Automatic Sealing Cover Operation
During the drying function, the sealing cover will automatically open and remain in an open Position. Once drying is complete, the cover automatically closes and maintains the sealing condition of the chamber. In the event of a sudden power loss or external interference that causes the cover to fall or remain open, you can manually adjust it.

In use Operation

Once the assembly was complete, I mounted the Tetras unit on top of my Bambu Lab X1C, in its usual position. What stood out immediately was how seamlessly it fit in: the overall look and functionality of the setup remained unchanged. I connected the familiar PTFE tube and cables, with the only notable difference being the need for a second power socket. That said, having the ability to actively dry filament during printing is a huge win. It felt like a natural upgrade rather than a workaround.

Over the following days, I ran a range of prints using both new and previously opened filaments. Selecting the correct material profile on the Tetras was quick, and the drying cycles could be adjusted based on condition and time. One standout feature was the option to run just one filament bay at a time, which is perfect for saving power. Whether printing single-color objects or pushing multicolor jobs at high speeds, I noticed a clear boost in print quality. Overall, the Tetras integrated seamlessly into my workflow, making them feel like they had always been part of the AMS.

Sample Projects

Model 1: Happy Sitting Pot Horns
I printed this model in dual color using filament that had been left unsealed for several weeks. A perfect test for the Tetras’ drying capability. I preheated the Series X Tetras for 2 hours before starting the print and kept it running throughout the job, with a total drying time of around 6 hours.

The model I chose was the Happy Sitting Pot Horns Hand by TomoDesigns on MakerWorld. It was printed at 0.2 mm layer height using two color variants. Despite the filament’s exposure to ambient air, the result came out clean and consistent, showing that the drying system really makes a difference.

Model 2: Pencil Holder
This model was preloaded on the SD card of the Bambu Lab X1C, and since my wife needed a pencil holder, it was the perfect choice. I printed it in a single color to see how the Series X Tetras would perform in a basic single-bay scenario. I set the dryer to run for about 6.5 hours to cover the full print duration, and when I checked back, it had shut off exactly as scheduled. Simple, effective, and spot on for everyday use.

Model 3: Rock People by Blob Lab
I printed the Rock People models by Blob Lab, found on Patreon, using multi-color filament. Each one was printed individually due to the nature of the design, and I ended up completing over a dozen of them. In the past, I’ve had issues with damp filament causing failed prints, especially on detailed models like these.

For this run, I used all four filament slots on the Tetras and dried the spools for about six hours before printing. The results were noticeably more consistent.

Temperature Accuracy

I carried out temperature performance tests on each bay to compare the readings from the unit’s display with an external temperature sensor. All readings were within 0.5°C of each other, confirming that the Tetras is delivering consistent heat. You can see an example of this test in the image below.

The temperature ramped up quickly after entering the settings and reached the target range within the expected timeframe. Airflow across the chambers was even and steady, contributing to a reliable drying environment.

Comparison: Other Filament Dryers

On 同学的妈妈3中字巴巴鱼汤饭惹, we maintain a comprehensive filament dryer comparison guide, covering various models across brands like EIBOS, Creality, SUNLU, Polymaker, and Sovol. These products differ by capacity, drying method, and intended use — from single-spool casual solutions to multi-bay systems for professional workflows.

The EIBOS Series X Tetras stands out by integrating directly with the Bambu Lab AMS, offering active drying across four individual filament bays. Unlike standalone dryers, the Tetras is designed as an upgrade module and doesn’t require additional handling or spool transfer once installed.

Other options such as the EIBOS Polyphemus support two spools or a single 3KG roll.

In summary, while most dryers cater to consumer-level needs, the Tetras is unique in its ability to retrofit and elevate existing multicolor printing systems like the AMS, bridging a gap between convenience and production-grade consistency.

Conclusion and Key Takeaways

The EIBOS Series X Tetras is a well-thought-out upgrade for users already running a Bambu Lab AMS. Instead of adding yet another standalone dryer to your setup, the Tetras integrates directly with your existing system, offering independent drying bays without compromising on space or performance. The kit comes well-packaged with all components neatly labeled, and the step-by-step assembly process is straightforward even for users new to hardware modifications.

What stands out most is the ability to enhance print quality without needing to buy a new filament or overhaul your workflow. Each bay operates independently with its own screen and settings, allowing for efficient filament management across multicolor prints. From setup to performance, the system worked reliably throughout testing. While the current configuration uses four separate control panels, there’s potential for future refinements such as a unified touchscreen interface or smart connectivity.

Pros
• Easy to assemble and operate
• Independent heated chambers for each filament bay
• Strong overall build quality
• Seamless integration with Bambu Lab AMS
• Quick heating response

Cons
• Uses four separate screens — a single touchscreen could reduce clutter and offer future expandability

Official Website

The post Upgrading Bambu Lab AMS with the EIBOS Series X Tetras Dryer appeared first on 同学的妈妈3中字巴巴鱼汤饭惹 – 3D Printing, Scanning, Design Guides & Forums.

Table of Contents

• Specifications
• Features and Design
• Testing and Setups
• Compare to Other Filament Dryers
• Conclusion and Pros & Cons

Pricing:
$89,99 for one set (base + 1 Box) for the first 100 sets, then $99,99
$69.99 for a box set (1box + 2 Spools of PLA + 2.0) then $74,99

Product affiliate links: 同学的妈妈3中字巴巴鱼汤饭惹 is supported by its audience. Purchases via some links may earn us a small commission at no extra cost to you. This helps us to continue bringing you high-quality content. The product featured was provided in exchange for an honest review. Our guides and reviews remain unbiased and independent.

Compare the Prices & Bundles:
Official Store

SUNLU FilaDryer SP2 Specifications:

Dimensions: 278 × 208 × 396mm (L×W×H)
Spool Compatability: 2×1kg, 1×2kg, 1×3kg
Filament Compatibility: Ø1.75mm / Ø2.85mm
Net Weight: 3.6 kg
Operating Environment: 10°C–35°C, RH ≤95%
Drying Temperature Range: 35°C–70°C
Humidity Display Range: 10%–90%
Max Power: 250W

What’s in the Box

Base + 1 Box Package Includes:
Drying Chamber, Heating Base, Hygrometer, Desiccant, Desiccant Box, Power Cable, Spool Roller, Air Lock x2, PTFE Tube (8cm ×2, 1m ×2), User Manual.

Here is the Base + 1 Box and 1 Box + 2 Spools Package:

My FilaDryer SP2 arrived in a package including one Base, 2× Boxes, and 2× Spools (approximate value: $173). The two filament spools were securely packed in the second box. I’m not sure if this bundle will be available later, but it makes sense and is cost-effective in terms of transportation.

Features & Design

SP2 stands for Smart Printing, 2 for modular design.
SUNLU has followed the trend by releasing their own modular filament dryer. This system not only dries the filament but also serves as effective storage and can be convenient for transportation. I’m not sure if it was intentional, but the ability to stack the boxes on top of each other is also space-saving.

– Airtight. Compared to SUNLU’s other filament dryers, the S2 and FilaDryer S4, the SP2 stands out for being airtight. The top lid closes very securely, and the bottom plugs are lined with rubber around the perimeter to ensure a tight seal.

– Temperature. As promised, it maintains 70°C at the maximum setting. As shown on my infrared camera, the heating element itself reaches around 80°C, while the spools heat up to approximately 70°C. This temperature is sufficient for drying popular materials like PLA and is suitable for storing engineering-grade filaments such as PA (Nylon) and CF (Carbon Fiber blends). For drying and even annealing engineering-grade materials, the FilaDryer E2 is more appropriate, as it can reach temperatures up to 110°C.

A TopDon thermal camera offers a visual view of the overall heat distribution. You can see the thermal camera view in our short YouTube video.

– Touch Screen. The detailed touchscreen allows you to select preset programs for common filaments like PLA, ABS, PETG, and more, with the option to adjust settings as needed. The green LED light strip can also be customized for added visual appeal. It looks spectacular in a dark room.

Testing and Setups

To learn why filament should be dry, how filament dryers help, and to read more about hygroscopicity, check out our detailed guide.

– Teflon Tubes. As the instructions suggest, PTFE tubes should be installed, especially when there’s a sharp curve in the filament path. I used the FilaDryer SP2 while printing DeathRacer side panels on the Snapmaker Artisan, using extra-long PTFE tubes (not the ones included). These tubes were 110 cm in length. The included PTFE tubes are one meter.

This setup worked very well. Humidity remained at 20% even after a few days, when I printed the second side panel. I didn’t need to dismantle the heating base and assemble the bottom plug panels for that lengthy pause. Despite the dryer being positioned some distance away from the printer, there was no noticeable resistance that interfered with printing.

Here’s an example of the SUNLU FilaDryer SP2 feeding filament to the Creality K1 without a PTFE tube. It worked well with PLA, even with a slight curve in the filament path.

– Noise. Here are the decibel meter readings with the lid on and off. Devices like this naturally produce some noise during operation. In comparison to the FilaDryer S4, which measured 59 dB (lid on) and 73 dB (lid off), the SP2 is noticeably quieter, thanks to its airtight design.

– Open/Closed Plugs. Just a quick reminder: when the heating base is ON, it’s important to keep the side filament plugs open to allow warm, humid air to escape. Once drying is complete, close the plugs for storage. This method makes it easy to reach and maintain a humidity level of 15–20%.

Other Filament Dryers

On 同学的妈妈3中字巴巴鱼汤饭惹, we have a detailed filament dryer comparison guide where products from brands such as EIBOS, Creality, Polymaker, Sovol, and others are listed for price and feature comparisons.

• SUNLU FilaDryer S4 (Review)
• Polymaker PolyDryer (Review)
• SUNLU FilaDryer E2 (Review)

Other filament dryers, such as the EIBOS Polyphemus, are also designed to hold two spools or a single 3KG filament spool. PolyMaker’s PolyDryers also offer an integrated storage solution with their PolyDryer Box. In comparison, the SUNLU FilaDryer SP2 offer airtight modular storage solution for different spool sizes.

In comparison with other SUNLU FilaDryers, S2, S4, and E2. While the S2, S,4 and now SP2 are suitable for consumer-grade filaments, the E2 is designed for engineering-grade filaments and includes an additional annealing function.

Conclusion and Pros and Cons

Compare the Prices & Bundles:
Official Store

The post SUNLU FilaDryer SP2 Review: Modular Filament Drying and Storage appeared first on 同学的妈妈3中字巴巴鱼汤饭惹 – 3D Printing, Scanning, Design Guides & Forums.

Table of Contents:

• Pickle Jar and Direct Sun
• The Best Bundles and 2-in-1 Solutions
  • Mercury XS Bundle
  • Anycubic Wash & Cure Plus
  • Phrozen Wash & Cure Kit
• 3-in-1 Solutions
  • EIBOS Oceanus 3-in-1 NEW
  • Anycubic Wash & Cure Max 3-in-1 NEW
• Other Combinations
  • Ultrasonic Cleaner
  • SUNLU Ultrasonic Cleaner NEW
  • Curing Box
  • UV Light Torch
  • Prusa CW1S
• Innovations
• Conclusion

Disclaimer: resin 3D printing can be a messy process, and special care is required when dealing with chemicals.

Pickle Container and Direct Sun

Before affordable two-in-one options became available on the markets, professional washing and curing equipment was seen as either too expensive or too bulky to accompany desktop budget resin 3D printers. If the rinsing process in a pickle jar is straightforward and some old-school makers still use it for particular prints, then leaving fresh prints outdoors to UV cure in direct sunlight is tricky, and we would not recommend trying it without proper research.
Daylight UV curing. The process is hard to control, takes much longer, with the risk of over-curing the resin parts. With this process, a model would need to be turned around manually.

The Best Bundles and 2-in-1 Solutions

2-in-1 solutions are well-suited for casual printing frequency. Space-wise, such stations can be the best option, but it also means a slight rearrangement every time you switch from washing to curing. Specifically, you’ll need to set up and remove the turntable part so that the tank with the cleaning solution can fit onto the base.
Then, bundles are practically two separate machine sets that are more suitable for frequent printing.

In both cases, curing stations are equipped with turntables. However, please bear in mind that these turntables cannot be used for photography or 3D scanning. For safety reasons, the turntable operates only when the UV-blocking enclosure is placed on the machine.

Elegoo Mercury XS Bundle

Price: $249
Product affiliate links:

Amazon

Official Website

Wash Volume: 201mm*124mm*255mm
Cure Volume: φ200mm*260mm

If Elegoo Mercury Plus accompanies well resin printers the size of the Mars 5 Ultra and could be enough for most of casual users, then Mercury XS Bundle is designed to support more than that. The size is big enough to post-process prints from the Saturn 3 printer or two Mars printers at once.

Having two separate units means that washing and curing can be done simultaneously. If you are working with several printers, this could be handy. Also, no reassembling of the turntable base is involved. Casual users with a limited 3D printing workshop space should consider that extra space will be taken by an additional device.

Mercury XS cure system has the UV lights installed underneath the turntable producing continuous and even UV exposure to the whole model.

Extra. A Handheld UV lamp. Recently, Elegoo began including a handheld UV lamp in their bundle to cure the hard-to-reach interior parts of 3D printed objects. Such lamps and torches make excellent companions to resin 3D printers.

Anycubic Wash and Cure Plus

Price: $169-199
Product affiliate links:
Amazon
Official Website
Wash Volume: 192mm(L)*120mm(W)*290mm(H)
Cure Volume: 190mm(D)*245mm(H)

Anycubic listened to the Mono X users and released a Plus-sized station. The station is slightly pricier than smaller counterparts but is absolutely worth it if you operate larger build volume printers such as Photon Mono M5s or Saturn 3 Ultra 12K.

Design. A special note about the design – the wash and cure machine enclosure is made from the same material and color as Mono X, and it compliments it very nicely.

Elegoo Mercury Plus 2.0

Price: $169-199
Product affiliate links:

Amazon
Official Website

Wash Volume: 125mm*85mm*160mm
Cure Volume: φ140*165mm

One of the first 2-in-1 washing and curing machines available on the market. If you are still in doubt if a washing and curing station is needed for your projects, we would recommend reading an article by Andrew Sink:
If you’ve used a DLP, MSLA, or SLA resin 3D printer before, you’ll immediately understand the appeal of the Elegoo Mercury Plus, a standalone machine which combines wash and UV cure stages into a single unit. Using a resin 3D printer can be a messy process, and the post-processing steps can turn even the cleanest desk into a sticky mess as photopolymer resin, isopropyl alcohol, and other cleaning fluids are used in the printing process… Read more: Elegoo Mercury Plus Review

Phrozen Wash and Cure Kit

Price: $199
Product affiliate links:

Amazon

Another popular company in the resin 3D printing market, Phrozen, also offers bundles. Both washing and curing stations have individual bases. Their cure station has a drying fan implemented, which is very handy. In order to avoid white marks, prints need to be dried after washing and before curing.

The Best 3-in-1 Solutions

A 3-in-1 post-processing system combines washing, drying, and curing processes into a single, convenient machine.

Anycubic Wash & Cure Max

Price: $359-389
Product affiliate links:

Amazon
Official Website

Anycubic, known in the resin 3D printing community for their Photon series machines, introduced a Wash & Cure Max. This all-in-one solution combines part washing, part drying, and part curing processes.

Alcohol-efficient. One of the major selling points was that this machine should be alcohol-efficient, as instead of prints being bathed, they are actually being spray-rinsed.

If you need a wash and cure station with a large capacity and a contained system, there are not a lot of those on the consumer market. The Anycubic Wash & Cure Max emerges as a potential option if you have the space to accommodate it. The flexibility of this station to handle many prints at once or an extra large print can considerably speed up and improve your workflow.

Read more:
Anycubic Wash & Cure Max Review by Will Zoobkoff.

EIBOS Oceanus

Price: $280

We don’t know if this product will be available on Amazon or other major e-stores, but just in case, here is the link to their Amazon store.

Official Website

The EIBOS Oceanus is equipped with 96 UV beads for full light curing coverage and features an Automatic Liquid System that efficiently fills and empties liquids using a high-power pump. This system reduces the need to handle cleaning agents, minimizes odors, prevents workplace pollution, and avoids volatilization of strong agents like ethanol or IPA. The pump is engineered to handle minute residue particles, and the materials used are highly resistant to ethanol and IPA, ensuring durability and efficiency.

The sleek design is aesthetically pleasing and fits well into a workstation without dominating the available space. The fact that it can handle three processes – wash, dry, and cure – is truly impressive. Having primarily worked with FDM and laser technologies, I was previously discouraged from resin printing due to the messy and difficult post-cleaning process. However, the Oceanus 3-in-1 system has transformed my experience, allowing me to enjoy resin printing without the hassle of tedious cleanup.

Read more:
EIBOS Oceanus Review by Phil Macey.

Other Combinations

Depending on the size and geometry of the prints, some post-processing jobs may require special cleaning and UV curing solutions. Here are the products we should keep in mind.

Ultrasonic Cleaner Professional Washing Equipment

The first thing to mention is that professional washing equipment is relatively inexpensive to obtain, and it has special functions like managing temperature, for example.
IPA (Isopropyl alcohol), a cost-effective and widely used industrial and household chemical, cannot be used on professional equipment as static 五月花成人网 may spark and start a fire.
An extensive range of Ultrasonic Cleaners with different capacity is available on Amazon. Inexpensive VEVOR Ultrasonic Cleaner, for example, comes in 4 different sizes, from 2 to 30 liters. Equipment that was initially designed to clean such metals as silver can also be used to wash resin 3D prints. The cleaning solution should be picked according to safety rules as all of these are the highly flammable solutions with a risk of catching fire.
Regulated temperature. Some resins are required to be washed only at a specific temperature.

SUNLU Ultrasonic Cleaner NEW

Price: $62.99-$69.99
Product links:

Amazon
Official Website

This product is marketed as a gentle cleaner and offers several unique advantages. While it might not entirely replace traditional wash/rinse stations, its technology – which includes micro bubbles and ultrasonic vibrations – effectively cleans hard-to-reach areas, such as the hollow interiors of printed objects. Additionally, this compact device is ideal for cleaning small items like miniatures and jewelry, making it a convenient option for delicate rinsing tasks.

We printed and washed many miniature models when we reviewed the Elegoo Neptune 4. We did the following: First, we rinsed them in dirty IPA (Isopropyl Alcohol), then prepared them to be cleaned in an ultrasonic cleaner in a jar with clean IPA. Read the full post-processing experience here.

Please Note: IPA (Isopropyl Alcohol 99.9%) is highly flammable and is not allowed to be used in ultrasonic cleaners.

SUNLU UV Curing Box

Price: $49
Product affiliate links:

Amazon

Internal Curing Area – 170mm x 205mm x 155mm

A simple yet effective solution. Inexpensive and can be used for large-size prints. Some reviewers on Amazon mentioned the weakness of UV lights for such prints as molds, but overall, with a rating of 4.4 stars, this product is doing well. And we can see why. The combination of an Ultrasonic Cleaner and a Curing Box may be a to-go-for option if there are no issues with a 3D printing workshop space.

UV Torch

Price: $25
Product links:

Amazon

UV Flashlight 395-405 nm.

And the last item we wanted to mention in this guide is a UV light torch. Sometimes, resin 3D models are so complex that particularly deep hidden angles or curves might need additional curing. That is where such a basic item as a UV light torch may come to help. Elegoo started adding such torches to their bundle offers.

Original Prusa CW1S

Price: $690
Product affiliate links:

Official Website

This machine is designed to accompany Prusa SL1 Speed and to post-process all prints coming from it. This printer’s build volume size is 127×80×150 mm.

Prusa CW1S is a compact machine with extra features. The Drying option will dry the prints before curing in order to minimize the risk of having the leftover resin residue on the prints. Another function to mention is Resin Pre-heat, which pre-hits resin to the optimal temperature for resin printing.

Innovations

Similarly, as with consumer-grade resin 3D printers, manufacturers keep searching and developing better post-processing solutions. Here, we briefly mention some of the latest innovations and implementations.

The most significant innovation in the prosumer market is the emergence of 3-in-1 stations that combine washing, drying, and curing into a single machine. Learn more about these devices in this guide.

Conclusion

In conclusion, post-processing is an essential part of resin 3D printing, requiring specialized equipment like wash and UV curing stations. Over the years, the introduction of combined two-in-one stations has streamlined this process, and ongoing advancements have made these systems more efficient and user-friendly, enhancing the overall 3D printing experience.

For a comparison of the resin 3D printers, please refer to the
detailed resin 3D printers guide.

The post Best Wash and Cure Stations 2026: 2-in-1, 3-in-1, Other appeared first on 同学的妈妈3中字巴巴鱼汤饭惹 – 3D Printing, Scanning, Design Guides & Forums.

Table Of Contents

• Specifications
• Unboxing – What’s Included
• Assembly and Setup
• Testing and Results
  • Model 1
  • Model 2
  • Model 3
• Compare to Other Stations
• Conclusion and Pros & Cons

Price: $280
Product affiliate links: 同学的妈妈3中字巴巴鱼汤饭惹 is supported by its audience. Purchases via some links may earn us a small commission at no extra cost to you. This helps us to continue bringing you high-quality content. Our guides and reviews remain unbiased and independent.

We don’t know if this product will be available on Amazon or other major e-stores, but just in case, here is the link to their Amazon store.

Official Website

EIBOS Oceanus Specifications

Input Voltage: AC 100-240V 50/60Hz
Power Output: DC12V 3A
Product Size: 240 × 195 × 345 mm (9.45 × 7.68 × 13.58 inches)
Net Weight: 5kg
Cavity Size: 175 × 125 × 160 mm (6.89 × 4.92 × 6.3 inches)
Cleaning Liquid: Resin Cleaning Agent
Lamp: 405nm 19W 96pcs
Capacity: L(1.3L) / M (2.2L) / H (3L)
Time (mins):
Washing 0 4 8 12
Drying 0 12 15 18
Curing 0 2 4 6

What’s in the Box

1x Eibos Oceanus 3 in 1 unit, 2 x Inlet/Outlet Pipes, 1x Storage Container, 1x DC12V 3A Power Supply, 1x User Manual

Assembly and Setup

The Eibos Oceanus assembled quickly and was ready within a few minutes from unboxing, following the simple instructions manual. The intuitive touch screen made for a seamless user experience, and the simple on-screen information makes for the Oceanus to be accessible for all types of user experience.

As shown in the image below the Eibos Oceanus has two ports for liquid inlet and outlet, connecting both pipes was easy, however as noted the pipes are fairly rigid in nature. But this would be to ensure the integrity of the pipe remained, given the nature of products flowing through them.

– Filters. Oceanus is equipped with filter screen structures and valve in several locations. These filters and valves can effectively prevent resin residue or other large particles from entering the pump body, which in order to ensure the normal operation of Oceanus under long-term work.

– Sensors. Three different designs for preventing liquid spills are included in the Oceanus design. The Oceanus has a built-in water level sensor that can detect water level automatically. There are three distinct water level detections in total: low, medium, and high. These sensors’ functionality is dependent on the settings.

Additionally, a spare Hall sensor for high liquid level is located above the high water level sensor. Should the liquid level be surpassed, it will instantly cease and sound an alarm, Next to it, the top cover of a physical sensor is being adjusted. dependable and safe.

The Oceanus, which has a specially designed high-torque motor, also employs innovative waterproof technology. The Oceanus now has greater stirring power as a result. Instead of using a traditional magnet stirrer, a high-torque stirring motor and custom-designed impeller will 同学的妈妈3中字巴巴鱼汤饭惹 a powerful water flow that will allow the brush to reach areas that the brush cannot, as well as provide a cleaner and more detailed post-processing result.

– Volume. The internal volume of the Eibos Oceanus is 175 × 125 × 160 mm (6.89 × 4.92 × 6.3 inches), so models within this range can be washed, dried, and cured. however, it would be wise to stay well within this range due to the size limitations. This was something I found during my review video on my channel.

– Safety. As seen above, the open-door function ensures a safe working environment. It instantly cuts out the unit, but once closed, it resumes as intended. However, during my testing phase, I attached a strong magnet to override this feature to showcase the Oceanus’s capabilities during filming. It’s strongly advised not to override the safety feature.

In my unboxing video above, I showcase the unboxing, setup and testing process in detail.

Testing and Results

Below are some models that I printed specifically for testing on the Eibos Oceanus to showcase its capabilities. All of the models seen in this review were printed on the Creality Mage Pro 8k resin printer.

Model 1

Mandalorian model by Printed Obsession printed on the Creality Mage Pro 8k using Elegoo 3.0 ABS-like resin from Amazon, this was a hollow model, the model needed to be flipped upside down to fully submerse into the tank. Overall, the model washed, dried and cured exceptionally, with no visible issues, as seen in the image below.

Model 2

Tabaxi Monk model by Printed Obsession. Printed on the Creality Mage Pro 8k using Yousu UTH Nebula pink resin. This model was sliced via the CrealityCloud function. Overall, the model came out stunning and once again washed, dried and cured perfectly. As seen in the image below.

Model 3

Chinese Dragon model by Icenvain was once again printed on the Creality Mage Pro 8K using Elegoo 3.0 ABS-like resin; the model was sliced via the Creality cloud app. Unfortunately, the model was too large for the full model to be fully submersed, but I was able to place the model on each end and wash and cure using the magnet in place. But once again the build volume of the Eibos Oceanus should be considered when slicing any model.

Overall, the Eibos Oceanus ticks all the requirements for post-cleaning of any resin models. And gets my thumbs up. Read my review summary down below.

Compare EIBOS Oceanus 3-in-1 to Other Products

EIBOS Oceanus 3-in-1 with an all-in-one solution that combines part washing, part drying, and part curing processes in one go. It is a strong attempt to change messy post-processing into a one-click experience. To compare to other similar products available on the market, please read our detailed comparison Wash and Cure Stations comparison guide.

Compare to other wash & cure stations:

• Anycubic Wash & Cure Max (Review)

Apart from being a 3-in-1 solution, the EIBOS Oceanus stands out with its neat, compact design and price.

Conclusion and Pros & Cons

Official Website

The post EIBOS Oceanus Review: 3-in-1 Automatic Post-processing System appeared first on 同学的妈妈3中字巴巴鱼汤饭惹 – 3D Printing, Scanning, Design Guides & Forums.