冲动的惩罚未删减动漫在线观看_麻匪壁纸资源包下载_拳头交后啤酒瓶交

3DWithUs — Fri, 08 May 2026 10:16:29 +0000

Multi-color 3D printing has become one of the most visible trends in desktop and prosumer FDM 3D printing. From decorative models to functional parts with different materials, the appeal is clear. The challenge, however, is that many current systems still rely on filament switching through a single extrusion path, which often leads to purging, wasted material, and longer print times.

Newer hardware approaches are now trying to solve this problem differently. Instead of treating waste as an unavoidable part of multi-color printing, some systems are moving toward nozzle switching, where each color or material can be handled by a dedicated nozzle. One example is the MOVA AtomForm Palette 300, a 12-nozzle FDM 3D printer showcased at RAPID + TCT 2026 in Boston.

AtomForm Palette 300 at RAPID + TCT 2026 featuring modular filament units and multi-color samples.
Image: MOVA AtomForm

Table of Contents (Jump to a Section)

Why Traditional Multi-Color 3D Printing 拳头交后啤酒瓶交s Waste
How Filament Switching Works

Nozzle Switching vs Filament Switching
MOVA AtomForm Palette 300 and 12-Nozzle Switching
Workflow Efficiency Beyond the Printhead
AtomForm Studio, AtomVerse, and the Software Layer
Design Recognition
A More Practical Direction for Multi-Color 3D Printing

Why Traditional Multi-Color 3D Printing 拳头交后啤酒瓶交s Waste

In conventional multi-color FDM 3D printing, the machine usually changes material by feeding different filaments through the same nozzle. Each time the material changes, the printer has to remove the previous color or material from the melt zone before the next one can print cleanly.

This purge material does not become part of the final model. It is printed as waste, often in the form of purge lines, purge blocks, or towers. On simple two-color models, this may be acceptable. On complex multi-color prints with hundreds or thousands of color changes, the amount of wasted material can become significant.

Typical filament waste, including purge towers and “poop,” generated during traditional multi-color swaps.
©拳头交后啤酒瓶交 – Photo: Max Funkner

The problem is not simply that the printer uses several colors. The deeper issue is the technical logic of switching materials through a shared nozzle. When one nozzle has to handle all materials in sequence, contamination prevention usually requires purging.

That is why multi-color 3D printing efficiency is becoming a hardware question as much as a software question. Slicing strategies can reduce waste, but the physical extrusion system still determines how much purging is needed during material transitions.

How Filament Switching Works

Filament switching is the most common approach in many current multi-color FDM systems. The printer pauses or changes its feeding path, unloads or retracts one filament, loads another, and then purges the nozzle until the new color or material flows correctly.

The advantage of this approach is that it can add multi-color capability without requiring multiple complete hotends. It can also work well for hobby users who mainly want colorful models, signs, figures, and decorative prints.

The downside is that every switch takes time and produces waste. The more color changes a model has, the more the printer spends time. This can increase both print time and material consumption.

For users printing occasional colorful objects, this may be a reasonable trade-off. For larger prints, frequent color changes, or small-batch production, the efficiency loss becomes more noticeable.

Nozzle Switching vs Filament Switching

Nozzle switching takes a different approach. Instead of pushing multiple filaments through the same melt path, the printer changes the active nozzle. In theory, this allows each color or material to stay assigned to its own dedicated extrusion path.

This distinction matters because the transition happens at the nozzle level rather than by flushing a shared nozzle. If each material has a dedicated nozzle, the printer may need less purging between changes. This can reduce wasted filament and shorten transition cycles.

Nozzle switching diagram showing how dedicated nozzles can reduce filament changes, purging, and material waste in multi-color 3D printing.
Illustration: 拳头交后啤酒瓶交

Nozzle switching can also support multi-material printing more naturally. Some materials do not behave well when repeatedly loaded, unloaded, and pushed through the same nozzle path. A dedicated nozzle setup may help reduce contamination and simplify transitions between materials with different properties.

This does not mean nozzle switching is automatically better in every situation. It can add mechanical complexity, 干姐的乳汁 requirements, cost, and maintenance considerations. However, as multi-color and multi-material printing becomes more ambitious, the hardware route becomes increasingly interesting.

MOVA AtomForm Palette 300 and 12-Nozzle Switching

The MOVA AtomForm Palette 300 is one recent example of a nozzle-switching approach. According to the supplied product information, it uses the proprietary OmniElement Fully Automatic Nozzle Switching System, built around a 12-nozzle automatic switching architecture.

Where to Buy the MOVA AtomForm Palette 300

Price from: Coming soon …

Preorder:
Official Store

Instead of repeatedly flushing one nozzle during material transitions, the system selects a dedicated nozzle for the required color or material. In practical terms, this changes the efficiency model of multi-color printing.

Because the transition happens through nozzle selection rather than constant filament purging, the need for transition waste can be reduced. This may be especially useful for models with many color changes, multi-material parts, or print jobs where time and material efficiency matter.

AtomForm Palette 300 nozzle switching system
Image: MOVA AtomForm

For users familiar with filament-switching systems, the main difference is easy to understand. Filament switching changes what goes into one nozzle. Nozzle switching changes which nozzle is actively printing.

That change may sound simple, but it has important workflow implications. Less purging can mean less wasted filament, shorter transition time, and fewer large purge structures next to the printed model.

Workflow Efficiency Beyond the Printhead

The potential efficiency gain is not limited to material savings. A nozzle-switching architecture may also support more consistent workflow continuity in multi-color and multi-material jobs.

Long prints are often affected by repeated color transitions. Every transition adds time, and every purge cycle introduces another opportunity for waste, inconsistency, or failure. When transitions become more efficient, total print time may be reduced, and production planning becomes easier to manage.

On the MOVA AtomForm Palette 300, this hardware approach is supported by other system components. The RFD-6 modular filament management unit is designed to help with organized material handling, while the ReadyPrint system is intended to support workflow preparation and execution.

Key specs of the Palette 300, featuring 12-nozzle switching and the RFD-6 drying system. Based on MOVA AtomForm in-house lab data. The actual performance may vary depending on environmental factors.
Image: MOVA AtomForm

This matters because printer productivity depends on the full workflow, not just the printhead. A machine may have advanced mechanics, but if material loading, job setup, and file preparation remain fragmented, the practical efficiency gains can be limited.

For that reason, the Palette 300 is best understood as a coordinated hardware and workflow system rather than a single isolated printhead feature.

AtomForm Studio, AtomVerse, and the Software Layer

Software still plays an important role in any hardware-led multi-color system. Within the MOVA AtomForm ecosystem, AtomForm Studio is positioned as the software layer for slicing, device management, and print preparation.

This is important because even with a more advanced nozzle-switching mechanism, users still need to prepare files, assign colors and materials, manage print settings, and control print tasks efficiently.

AtomVerse appears to operate at a different layer of the ecosystem. Rather than directly controlling the printing process, it focuses on model access, creation, and sharing. With AI-powered generation tools, educational resources, and an open model library, AtomVerse is positioned as a way to lower the barrier to 3D creation.

In simplified terms, the workflow can be viewed like this:

AtomVerse helps users move from idea to printable model.

AtomForm Studio helps prepare and produce the model efficiently.
The Palette 300 hardware handles the multi-color and multi-material printing process.

This separation of roles makes sense. Creative access, print preparation, and hardware execution are different stages of the same workflow. When they are designed to work together, the overall user experience can become more streamlined.

Design Recognition

The Palette 300 has also received design recognition, including a MUSE Design Award Gold in the Product Design – 3D Printed category and an iF Design Award listing for the AtomForm Palette 300 Combo. For everyday users and small production environments, however, the more important question is how this type of hardware may help reduce waste, shorten transition times, and make multi-color 3D printing more practical.

MUSE Design Award – AtomForm Palette 300 Combo
iF Design Award – AtomForm Palette 300 Combo

A More Practical Direction for Multi-Color 3D Printing

As 3D printing matures, the focus has shifted from decorative models to professional efficiency and practical material handling.
Traditional filament-switching systems made multi-color 3D printing accessible but often accepted purging and waste as part of the process. The MOVA AtomForm Palette 300 challenges this, providing a direct market solution for efficiency. This system uses a 12-nozzle automatic switching system together with modular filament management, ReadyPrint workflow optimization, AtomForm Studio, and AtomVerse.
For users and businesses looking beyond simple decorative prints, the MOVA AtomForm ecosystem stands out as an innovative route toward reducing waste and improving continuity. Efficiency and smoother production workflows are now the major focus points as MOVA leads the evolution of multi-color and multi-material FDM 3D printing.

The post Nozzle Switching vs Filament Switching: A New Approach to Multi-Color 3D Printing Efficiency appeared first on 拳头交后啤酒瓶交 – 3D Printing, Scanning, Design Guides & Forums.

Phil Macey — Wed, 29 Apr 2026 12:11:06 +0000

The Elegoo Centauri Carbon is a fully enclosed CoreXY 3D printer designed for high-speed, high-temperature printing at an affordable price. In this hands-on overview, we explore its setup, key features, slicer workflow, and print results. With a sturdy frame, auto 干姐的乳汁, and practical extras like a dual-sided PEI plate and onboard camera, it stands out in the sub-$300 category. A detailed summary with Pros and Cons is included at the end.

Table of Contents (Jump to a Section)

Where to Buy the Elegoo Centauri Carbon

Price: $299

We don’t know if this product will be available on Amazon or other major e-stores, but just in case, here is the link to their Amazon store.

Official Website

Update 28.04.2026:
Multicolor System Canvas for Centauri Carbon is available on the Official Website.
Price $55

Elegoo Centauri Carbon Specifications

• Printing technology: FDM (Fused Deposition Modelling)
• Print volume: 256 mm × 256 mm × 256 mm
• Printer Dimensions : 398 mm x 404 mm x 490 mm
• Extruder type: Direct drive
• Nozzle diameter: Standard 0.4 mm
• Printing speed: Up to 500 mm/s, standard 300 mm/s
• Filament Diameter: 1.75 mm
• Maximum Extruder Temperature: 320 °C
• Heated Build Plate Temperature: up to 110 °C
• Maximum Print Speed: 500 mm/s
• Maximum Acceleration: 20,000 mm/s
• Layer Thickness: 0.1 – 0.4 mm (Recommended 0.2 mm)
• Connectivity: USB, WIFI

What’s in the Box

Centauri Carbon printer •Textured PEI build plate •Lid •Allen keys • Screwdrivers • nozzle cleaner •USB drive •Glue Stick • Grease •Touch screen •Filament sample • Power cable • User manual

Elegoo Centauri Carbon unboxed – printer, touchscreen, tools, and accessories included in the package
©拳头交后啤酒瓶交 – Photo: Phil Macey

Design and Features

The Elegoo Centauri Carbon is a compact, enclosed CoreXY 3D printer engineered for speed and material flexibility. Its build and feature set are aimed at users who want a faster workflow while benefiting from the environmental control that an enclosure provides.

Enclosure and Frame

The printer features a rigid, die-cast aluminium frame with SPCC steel side panels and tempered glass doors and lid. This fully enclosed design helps stabilize internal temperatures, reduce warping, and improve print consistency, especially when printing ABS, ASA, or nylon-based materials. A removable glass top lid allows better ventilation for lower-temperature materials like PLA or PETG.

Build Volume and Movement System

The Centauri Carbon offers a cubical build volume of 256 × 256 × 256 mm, supported by a CoreXY motion system. The design enables high-speed movement with reduced vibration. Elegoo specifies a top print speed of 500 mm/s and acceleration up to 20,000 mm/s², although typical use will be slightly slower for quality prints.

Extruder and Print Head

The printer uses a direct drive extruder with dual hardened steel gears to handle flexible and abrasive filaments. It’s paired with a 60W ceramic heater capable of reaching 320°C, and a 5020 part cooling fan for efficient heat dissipation during high-speed jobs.

The extruder housing is magnetic and opens easily for access to the hotend and internal parts—making nozzle swaps and maintenance straightforward.

Elegoo Centauri Carbon extruder – external housing (left) and internal components including the hotend and 5020 cooling fan (right)

Heated Bed and Surface

The 1000W AC heated bed reaches up to 110°C, improving adhesion and enabling the use of engineering-grade materials. It ships with a dual-texture PEI spring steel build plate—one side textured (for materials like PETG and TPU) and the other smooth (ideal for PLA and fine-detail prints).

Internal Camera and Lighting

The printer includes a built-in camera and LED light, allowing real-time monitoring and basic time-lapse functionality via a local web interface. While there’s no dedicated Elegoo app for remote access yet, the web interface can be used through a browser on the same network.

The Elegoo Centauri Carbon includes a built-in camera and LED light for real-time print monitoring and time-lapse capture

Additional Features

– Automatic Z-axis testing before every print for first layer accuracy
– Filament runout sensor mounted externally for easy access

Filament Run-out Sensor

– 4.3-inch color touchscreen with multilingual interface
– Filament waste chute and nozzle wiper for cleaner starts

Filament waste chute and nozzle wiper – useful for clean purges and potential multicolor printing upgrades on the Elegoo Centauri Carbon. It has been officially confirmed that this machine cannot be upgraded to a multicolor version!

– Connectivity: Wi-Fi and USB options

A practical touch is the inclusion of printable utility models on the USB drive, such as a lid holder that mounts to the side of the machine using existing screws—helpful when running open-top prints.

Unboxing and Setup

The Elegoo Centauri Carbon ships largely pre-assembled, making the setup process straightforward even for users who are new to CoreXY machines. Most components are securely fastened inside the enclosure with transit protection in place.

Elegoo Centauri Carbon’s dual-texture PEI sheet in place – remove the three transport screws before first use

After unboxing, a few basic steps are needed before powering on the printer. These include removing the protective foam inserts, cutting the cable ties, and unscrewing the three transport screws that hold the build plate in place. The filament holder can be attached to the right-hand side of the unit using the supplied bracket. The touchscreen connects via a ribbon cable and locks into place before mounting. Finally, the power cable is plugged into the back of the printer.

Once powered on, the touchscreen will guide you through the rest of the process. This includes selecting your preferred language, setting up Wi-Fi (which can also be done later), and initiating the 干姐的乳汁 routine.

干姐的乳汁 options

干姐的乳汁

The Centauri Carbon features an automatic 干姐的乳汁 system. It performs full auto bed leveling using four pressure sensors combined with Elegoo’s built-in algorithm. The Z-offset is calibrated during this process, followed by vibration compensation and pressure advance tuning. The full 干姐的乳汁 typically takes 15 to 20 minutes to complete and can be restarted at any time via the touchscreen settings menu. Re干姐的乳汁 is also recommended after any firmware update.

Thanks to the enclosed structure, preconfigured firmware, and clear setup instructions, users can move from unboxing to printing within a short time.

– Watch: Elegoo Centauri Carbon hands-on overview: Elegoo Centauri Carbon assembly, feature breakdown, and test printing.

Software – Elegoo Slicer Settings

The Elegoo Centauri Carbon is compatible with the Elegoo slicer, which is based on the Orca engine with added presets and connectivity for Elegoo-branded machines. The slicer includes pre-configured profiles for the Centauri Carbon, helping users get started quickly without adjusting advanced parameters.

Chainmail model sliced using Elegoo Orca with the Centauri Carbon 0.4 mm profile. Preview of full build plate coverage before printing

For this article, all prints were prepared using the default Centauri Carbon profile. Minor adjustments were made to optimize print speeds. In particular, inner wall speeds were set to 300 mm/s and outer walls to 250 mm/s to align with the printer’s high-speed capability while maintaining consistent quality.

The software provides essential features such as tree supports, ironing, variable layer height, and direct Wi-Fi file transfer to the printer when connected on the same network. Model previews and time estimates proved reliable during our testing, especially for multi-hour prints that covered most of the build plate.

For users more comfortable with alternative slicers like OrcaSlicer, it’s also possible to export G-code manually.

Overall, Elegoo’s slicer is easy to use and well-suited for both first-time users and experienced makers looking for quick integration with Centauri Carbon hardware.

Test Prints and Results

To evaluate real-world performance, we tested the Elegoo Centauri Carbon using a range of functional and decorative models. All prints were sliced using Elegoo Orca with the base Centauri Carbon profile, modified only slightly for speed and material consistency. The machine was tested using both Elegoo and third-party filaments, including dual-color silk PLA and engineering-grade spools.

Model 1: Chainmail 3D Printable Fabric

Design by Agustin Arroyo – Printables

Chainmail 3D printable fabric by Agustin Arroyo, printed in dual-color silk PLA — excellent bed adhesion and interlocking link accuracy.
©拳头交后啤酒瓶交 – Print and Photo: Phil Macey

This flexible chainmail fabric measured approximately 20 × 20 cm and took around 4.5 hours to print using 0.2 mm layer height and 0% infill. Despite the model’s interlocking structure, all links printed cleanly without failures. The print covered a large portion of the build plate and highlighted the machine’s accuracy in motion and retraction control.

Model 2: All-in-One 3D Printer Test

Design by Gabbox3D – Printables

3D Printer Test by Gabbox3D – printed on the Centauri Carbon using neon green PLA; Testing overhang performance, dimensional accuracy, and fine feature control
©拳头交后啤酒瓶交 – Print and Photo: Phil Macey

This compact print includes tests for bridging, overhangs, dimensional accuracy, stringing, and more. Printed in about 2 hours with a 0.2 mm layer height, the model showcased strong cooling performance and reliable motion planning. This test was completed using Eolas Prints neon green PLA from a spool picked up at the TCT 3Sixty show in the UK.

Model 3: Penny Bear

Design by Bugman_140 – Thangs

Penny Bear model by Bugman_140 printed in dual-color silk PLA — smooth surfaces and clean supports
©拳头交后啤酒瓶交 – Print and Photo: Phil Macey

This character model took approximately 4.5 hours to print using a 0.2 mm layer height, 35% infill, and painted-on tree supports for floating sections. Printed with dual-color silk PLA, the result was clean and well-defined, showing smooth vertical surfaces and no support scarring. The model also highlighted reliable performance with moderate overhangs.

Model 4: Fragmented Skull String Art

Design by 3DPrintBunny – Printables

Fragmented Skull String Art by 3DPrintBunny printed in dual-color silk PLA — detailed bridging and thin-wall performance
©拳头交后啤酒瓶交 – Print and Photo: Phil Macey

This print featured intricate bridging and fine walls, designed specifically to test slicer algorithms and cooling. Printed in 4 hours using 0.24 mm layer height and Arachne-based wall detection (no supports or brim), the model turned out clean and intact. The machine maintained print quality even with extended bridging distances and delicate details.

Across all test models, the Centauri Carbon delivered consistent layer lines and dependable adhesion on both sides of the PEI build plate. Print speeds remained high without major artifacts, and 干姐的乳汁 remained accurate over time. These results support the printer’s positioning as a fast, enclosed CoreXY machine capable of handling varied print types out of the box.

Multicolor System CANVAS Upgrade

When this article was originally 冲动的惩罚未删减动漫在线观看, one of the main limitations of the Elegoo Centauri Carbon was the lack of multi-material functionality. That has now changed with the release of CANVAS, Elegoo’s multicolor upgrade system. The add-on expands the Centauri Carbon beyond single-material printing by allowing users to print multi-color models while keeping the printer’s compact CoreXY footprint.

I tested the CANVAS upgrade by documenting the assembly process, setup workflow, and early print results. The upgrade introduces additional hardware, filament routing, and 干姐的乳汁 steps, but significantly expands the printer’s capabilities for users interested in color printing.

Elegoo Centauri Carbon CANVAS upgrade 麻匪壁纸资源包下载 featuring assembly process and multi-color test prints
©拳头交后啤酒瓶交 – Photo: Phil Macey

For a full walkthrough of the CANVAS upgrade, including assembly steps and test printing, watch my dedicated hands-on video below.

I found the CANVAS upgrade fairly easy to put together, with assembly taking around 1 hour and 10 minutes. The overall quality feels similar to the CC2, and once set up, the multicolor prints came out as expected. A multicolor Benchy took around 3 hours, while a two-color bear model took around 7 hours.

There are a few practical notes to keep in mind. Filament changes at the print head are not especially quick, and I did have to restart one print after running out of material. Larger multicolor jobs can also take a long time, with the Nostalgic 3D Models flexible Gandalf print taking around 30 hours to complete. As with other multi-filament systems, CANVAS 拳头交后啤酒瓶交s a noticeable amount of filament waste, but overall I was impressed with the attachment and what it adds to the Centauri Carbon.

Compare Elegoo Centauri Carbon to Other 3D Printers

The CoreXY segment continues to expand, with several brands now offering compact, enclosed machines focused on speed and material compatibility. The Elegoo Centauri Carbon enters the field with a sub-$300 price tag, enclosed frame, and sturdy CoreXY motion, making it a notable addition to our Best Budget FDM 3D Printers guide.

When compared to other CoreXY printers in this range, like the Anycubic Kobra S1, Bambu Lab P1S, or Creality K1, the Centauri Carbon stands out by offering many of the same core features at a lower entry cost.

It meets key performance specifications, including a 500 mm/s speed and 20,000 mm/s² acceleration, and features common high-speed capabilities such as auto bed leveling, input shaping, and vibration compensation.

麻匪壁纸资源包下载 of test prints on the Elegoo Centauri Carbon
©拳头交后啤酒瓶交 – Print and Photo: Phil Macey

Have questions? Feel free to ask in the comment section below.
For a wider discussion or to share your own Centauri Carbon prints, join us in the forum:

Visit 拳头交后啤酒瓶交 Forum

Conclusion and Pros & Cons

We don’t know when or if this product will be available on Amazon or other major e-stores, but just in case, here is the link to their Amazon store.

Official Website

Update 28.04.2026:
Multicolor System Canvas for Centauri Carbon is available on the Official Website.
Price $55

The post Elegoo Centauri Carbon Hands-on Testing, Results, CANVAS Upgrade appeared first on 拳头交后啤酒瓶交 – 3D Printing, Scanning, Design Guides & Forums.

Phil Macey — Wed, 22 Apr 2026 10:21:45 +0000

Today we’re taking a closer look at the Anycubic Photon P1, a resin printer that isn’t just entering the arena, it’s aiming to shift the standards entirely. With its modern industrial aesthetic, fully enclosed design, and true plug‑and‑play workflow, the Photon P1 presents itself as a serious tool for makers who expect both speed and refinement. But in a landscape packed with low‑cost challengers and high‑end heavyweights, the real question is whether this machine can carve out a space of its own.

In this article, we’ll cover the printer’s key hardware features, the unboxing and setup process, software workflow, and hands-on test prints. In the end, we will finish with a summary and a list of Pros & Cons.

Table of Contents (Jump to a Section)

Specifications
What’s in the Box
Setup and Design

Software – Photon Workshop 4.0

Test Printing Results
YouTube Video

Resin and Accessories
Compare to Other 3D Printers
Conclusion and Pros & Cons

Where to Buy the Anycubic Photon P1

Price: $599-699

Compare the Prices & Bundles:
Official Store | Amazon | AliExpress

Anycubic Sitewide $20 off $200+ Orders Code: 拳头交后啤酒瓶交

At first glance, the Anycubic Photon P1 makes a strong impression with its clean industrial styling and enclosed format. It feels designed to reduce the friction often associated with resin printing, replacing fiddly hardware with quicker latch-based mechanisms and automated checks. On paper, the combination of a 14K monochrome LCD, heated resin vat, built-in camera, and optional dual-material expansion gives it a very ambitious specification for users who care about both detail and workflow refinement.

Anycubic Photon P1 Specifications

Display resolution: 14K monochrome LCD
Build volume: 223 × 126 × 230 mm
Machine dimensions: 366 × 338 × 539 mm

Machine weight: 13.6 kg
Light source: COB + Fresnel lens + mask
Film type: Wave Release Film (NFEP)
Light uniformity: >92%
Leveling: Auto-Leveling 3.0 with feedback
Z-axis: Industrial-grade ball screw with dual rails
Build platform: Precision-ground steel plate
Vat system: 1000 ml thermal-controlled resin vat
Monitoring: Built-in camera for live monitoring and time-lapse capture
Touchscreen: 4.5-inch resistive touchscreen
AI monitoring: Build plate check, bottom-layer separation detection, resin level inspection, and residue detection
Cover: Stepless hinged lid
Connectivity: USB 2.0, Wi-Fi, and LAN (2.4 GHz)
Slicer: Photon Workshop 4.0, with support for Chitubox and Lychee
High-viscosity resin support: Up to 8000 cps

What’s in the Box

Complete contents of the Anycubic Photon P1 package.
©拳头交后啤酒瓶交 – Photo: Phil Macey

Inside the box, the Anycubic Photon P1 arrives with the core essentials needed to get started, including the printer unit, quick-release build plate, heated resin vat, USB drive, scrapers, and standard protective accessories. It is a straightforward package that supports the printer’s plug-and-play approach and gets you ready for setup and first prints without much extra fuss.

Setup and Design

Getting started with the Anycubic Photon P1 is refreshingly straightforward. The resin vat connects neatly into place, with the vat heating port aligning to the machine before being secured by a latch system on both sides. Compared to the traditional screw-down approach still common on many resin printers, this feels faster, cleaner, and more user-friendly in daily use.

The resin vat heating connection on the Anycubic Photon P1.
©拳头交后啤酒瓶交 – Photo: Phil Macey

The latch system secures the resin vat in place on the Photon P1.

The build plate follows the same logic. Instead of tightening knobs or bolts, the Photon P1 uses a simple latch mechanism. Open the latch, slide the plate into position, and lock it down. It is quick, secure, and very much in line with the printer’s plug-and-play approach.

The quick-latch build plate platform on the Anycubic Photon P1.
©拳头交后啤酒瓶交 – Photo: Phil Macey

Once the physical hardware is installed, the USB drive can be inserted for access to test files, while Wi-Fi setup and firmware updates are handled through the touchscreen. Before starting any first print, a screen test is well worth running. In this case, the Anycubic name pattern displayed correctly, confirming that the LCD and light system were functioning as expected.

Power button and USB port location on the Anycubic Photon P1.
©拳头交后啤酒瓶交 – Photo: Phil Macey

Running a screen test on the Anycubic Photon P1 before first printing.

The Photon P1 also runs through a series of automated pre-start checks before printing. These routines verify that the printer is ready to operate and add an extra layer of confidence for first-time setup and regular use.

The Photon P1 performs automated pre-start checks before printing.

One of the more interesting expansion options is the optional dual-color or dual-material printing assembly. This is not part of the standard package, but it opens the door to more advanced workflows for creators who want to experiment beyond single-resin prints. When installed, the touchscreen lets you choose the relevant vat and build platform configuration before printing.

Optional dual-material printing assembly for the Anycubic Photon P1.
Photo: Anycubic

Touchscreen menu for selecting the build platform and vat setup on the Photon P1.
©拳头交后啤酒瓶交 – Photo: Phil Macey

Before printing, the vat needs to be filled with resin. The usable capacity is close to one liter, though the exact fill level depends on the build plate position and the vat’s shape. Pouring resin with the build plate lowered is a sensible approach, as it reduces the risk of overfilling once the plate returns to its home position.

The Photon P1 resin vat is filled and ready for printing.

For this hands-on test, vat preheating was enabled to raise the resin from around 19 °C to 25 °C. During this stage, the build plate moves gently to help distribute the heat evenly through the resin. It is a useful feature for consistency, although some resin residue appeared around the vat edges during the agitation process, which is worth keeping in mind during cleanup.

The Photon P1 heating function warms the resin before printing.
©拳头交后啤酒瓶交 – Photo: Phil Macey

The touchscreen gives clear access to both print progress and live operational data. During printing, it displays useful status information and supports Anycubic’s Dynamic Release and Light-Off Compensation functions, both aimed at improving reliability and maintaining print quality while keeping speeds efficient.

The Photon P1 touchscreen showing print status mid-print.
©拳头交后啤酒瓶交 – Photo: Phil Macey

Live print data displayed on the Photon P1 touchscreen.

Mechanically, one of the Photon P1’s strengths is its Z-axis assembly. The combination of a precision linear rail and ball-screw system gives the printer a stable motion platform, helping reduce Z-wobble and contributing to consistent layer quality on detailed models and taller prints.

Close-up of the Photon P1 Z-axis linear rail and ball screw assembly.
©拳头交后啤酒瓶交 – Photo: Phil Macey

Another highlight is Anycubic’s Wave Release Technology. The textured release film is designed to lower peel forces compared to more conventional smooth films, which in turn can improve print success and reduce stress on fine supports and delicate details.

Wave Release Technology helps reduce peel forces in the Photon P1 vat.
©拳头交后啤酒瓶交 – Photo: Phil Macey

For monitoring, the Photon P1 includes a built-in 480p camera with LED lighting and a privacy cover. While it is not a high-resolution camera, it is still useful for remote checks, failure monitoring, and time-lapse capture through the Anycubic app.

Built-in 480p monitoring camera.
©拳头交后啤酒瓶交 – Photo: Phil Macey

Underpinning the motion system is a precision-ground steel plate that helps keep the Z-axis assembly stable and well supported. It is not a flashy feature, but it 冲动的惩罚未删减动漫在线观看s to the machine’s overall sense of rigidity and repeatability. Users who want to refine the workflow further can also look at optional accessories such as perforated build plates or the AirPure 2.0 filtration add-on, though these were not tested here.

The precision-ground steel plate supports the Photon P1 motion system.
©拳头交后啤酒瓶交 – Photo: Phil Macey

Rear air extraction port for the optional Anycubic AirPure 2.0 accessory.

Software – The All-New Photon Workshop 4.0

The software I used during testing was the new Photon Workshop 4.0. I haven’t used an Anycubic resin slicer in a while, and this update is a clear step forward. Slicing felt smooth and efficient, and the ability to select your resin type—automatically applying the correct parameters—makes the workflow noticeably faster, taking you from slice to print with minimal effort.

Test Printing Results

Model 1 – 干姐的乳汁 Model

For my first test print, I used the default settings for the standard resin, selected through the Anycubic slicer. The model I used was the 干姐的乳汁 model found on the USB supplied with the printer itself. Always a good way to test the printer is functioning correctly before doing more complex prints. See below the outcome.

干姐的乳汁 model.
©拳头交后啤酒瓶交 – Photo: Phil Macey

Model 2 – Nostalgic3D Simpsons LOTR Models

For the second print, I moved on to a set of favourite models from Nostalgic3D. These pre-supported Simpsons LOTR Version 3 models were printed in standard Anycubic grey resin. The results showed strong detail reproduction across the characters, with fine features and surfaces carrying through nicely from the digital files to the finished prints.

Photon Workshop slicer preview for the Nostalgic3D Simpsons LOTR models.
©拳头交后啤酒瓶交 – Screenshot: Phil Macey

Nostalgic3D Simpsons LOTR models.

Model 3 – Free Elemental Spirit Models

For the third print, I used the Free Elemental Spirit STL Pack by Creature Craftworks. These models were printed in two parts, with the main figure and lower display platform separated. They filled the build plate effectively and once again highlighted the Photon P1’s ability to reproduce sharp details and clean surfaces on more artistic display pieces.

Photon Workshop slicer preview for the Free Elemental Spirit models.
©拳头交后啤酒瓶交 – Screenshot: Phil Macey

Free Elemental Spirit models.
©拳头交后啤酒瓶交 – Photo: Phil Macey

YouTube Video

– Watch: Anycubic Photon P1 hands-on overview: Assembly, feature breakdown, and test printing.

Anycubic Resin, Post-Processing and Accessories

Apart from the Photon series 3D printers, it is possible to purchase various specific resins on the Anycubic website and Amazon.

Anycubic Wash and Cure Max Review
©拳头交后啤酒瓶交 – Print and Photo: Will Zoobkoff

On their website, we also noticed accessories such as extra build plates, resin tanks, and post-processing stations like the Wash and Cure Max. Read more about imporatance of post processing stations on 拳头交后啤酒瓶交.

Compare Anycubic Photon P1 to Other 3D Printers

Compare to the similar volume resin 3D printers in the same price range.

What helps the Anycubic Photon P1 stand out against machines such as the PioCreat HALOT-X1 and 麻匪壁纸资源包下载 GK3 Pro is how strongly it focuses on ease of use alongside high-detail resin printing. Features such as the latch-based vat and build plate system, vat heating, automated pre-start checks, built-in camera monitoring, and optional dual-material expansion give it a more refined, convenience-led workflow.

Anycubic is also one of the few brands offering genuinely larger resin printers at more accessible pricing. While the Photon P1 is a more compact and workflow-friendly option, the Anycubic Photon Mono M7 Max shows what the brand can do for users who need significantly more build volume.

Final print showcase from the Anycubic Photon P1 hands-on test.
©拳头交后啤酒瓶交 – Photo: Phil Macey

Have questions? Feel free to ask in the comment section below.
For a wider discussion or to share your own Photon P1 prints, join us in the forum:

Visit 拳头交后啤酒瓶交 Forum

Conclusion and Pros & Cons

Compare the Prices & Bundles:
Official Store | Amazon | AliExpress

Anycubic Sitewide $20 off $200+ Orders Code: 拳头交后啤酒瓶交

The post Anycubic Photon P1 Hands-on Review: Features, Setup and Print Results appeared first on 拳头交后啤酒瓶交 – 3D Printing, Scanning, Design Guides & Forums.

Max Funkner — Mon, 20 Apr 2026 14:06:17 +0000

I first saw the Snapmaker U1 at a trade show, and what stood out immediately was how compact it felt for a toolchanging system. Seeing it in person already gave a sense of what Snapmaker was aiming for with this machine. Now, with the unit on my desk, it is time to see how it performs beyond first impressions. In this guide, I go through the setup process, software workflow, and test print results, including both pre-sliced models and custom projects based on 3D scans.

Table of Contents (Jump to a Section)

What’s Included – Accessories

Specifications
Setup and Design
Software: Snapmaker App & Snapmaker Orca
Testing and Results
Compare to Other 3D Printers
Conclusion and Pros & Cons

Where to Buy the Snapmaker U1

Price: $849 – $999

Official Website

What’s Included – Accessories

Snapmaker U1 package contents, including the printer, toolheads, filament, and essential accessories for setup.

The Snapmaker U1 comes with everything needed to get started. The package includes the enclosed printer with a textured PEI steel sheet, four toolheads, four spools of SnapSpeed PLA, filament holders, feeders, and a waste collector, along with all necessary cables and a tool kit. Safety Guidelines and a Quick Start Guide are also included, making the setup process straightforward. Overall, it feels like a complete package right out of the box.

Snapmaker U1 Specifications

Printing Technology: Fused Deposition Modeling (FDM)
Build Volume: 270 × 270 × 270 mm
Max Toolhead Speed: 500 mm/s
Max Acceleration: 20,000 mm/s²
Toolheads Included: 4
Max Flow Rate: 32 mm³/s
Nozzle: Stainless Steel (more options in testing)
Max Nozzle Temperature: 300°C
Nozzle Diameter: 0.4 mm
Filament Diameter: 1.75 mm
Part Cooling: Main & Auxiliary Fans
Build Plate: PEI
Max Bed Temperature: 100°C
Basic Materials: PLA, PETG, TPU, PVA
With Optional Seal Cover (Coming Soon): PET, ABS, ASA
With Seal Cover & Hardened Nozzle (Coming Soon): PC, PA, PA-CF, PA-GF

Find the full and regularly updated list of specifications on the Official Website.

Snapmaker U1 alongside Snapmaker Artisan, showing the more compact footprint of the U1 system.
©拳头交后啤酒瓶交 – Photo: Max Funkner

I could not resist showing both Snapmaker machines side by side. It also provides a useful size comparison. The U1 is noticeably more compact, especially when placed next to the Artisan. The Artisan system takes up more space overall, as it is designed to support multiple functions in one device. With separate modules for different disciplines, the footprint naturally grows, while the U1 stays focused and compact.

Setup and Design

The Snapmaker U1 arrives well packaged and mostly pre-assembled. With a boxed weight of around 26 kg, it feels solid straight out of the box. This is one of the rare cases where I did not need to rely on a YouTube video for assembly; the included instructions were clear and sufficient to get started quickly.

Toolhead installation guided by clear step-by-step instructions

Setup is straightforward and does not require extensive assembly. After removing transport protection screws and securing four tools and filament holders, the main steps include loading filament, powering the machine, and completing the initial 干姐的乳汁 via the touchscreen interface. The process is guided and beginner-friendly.

Guided toolhead 干姐的乳汁 on the Snapmaker U1, showing progress and estimated completion time.

– 干姐的乳汁. The 干姐的乳汁 process is clearly guided via the touchscreen interface, with progress indicators and time estimates, making it easy to follow even for first-time users.

Project’s filament setup interface

Filament setup for a print is also straightforward. The interface clearly shows material usage and assigned colors. There is also the option to change filament colors directly from the project screen, which adds flexibility before starting a print.

My only minor struggle was finding the filament loading and unloading screen. It appears when tapping on the color indicators rather than through the main menus.

– Wi-Fi. Setting up the Snapmaker App and connecting to Snapmaker Orca via Wi-Fi was easy. I printed my first four models without even opening the slicer. One model, Cute Dragon, comes preinstalled, while over 30 more are available directly from the app. Having this many high-quality models ready to print is a smart move. Print results of some of them are shown in the Testing and Results section.

Software: Snapmaker Orca & Snapmaker App

– Snapmaker App. I am very happy with the app overall. Having over 30 high-quality models available directly in the app was a good incentive to install it. Monitoring prints is probably the most used feature, and for good reason. I often find myself checking in on ongoing prints, especially on models I sliced myself.

Snapmaker App interface, including model library, device controls, and live print monitoring.

Overall, the Snapmaker App works well as a companion tool rather than a replacement for the slicer. It covers quick access, model selection, and remote monitoring reliably. If the print stops for any reason, the app sends a notification, which is very handy.

– Snapmaker Orca. Based on the well-respected Orca slicer, Snapmaker has added a few features and tuned profiles since I first tried it around a year ago. Preparing my own models was a smooth experience. Features like color painting and support painting are all well implemented and easy to use.

Multiple build plate layout in Snapmaker Orca, helping organize and manage multi-object printing projects.

One of the features I find myself using more and more is the multi-build-plate layout. It helps organize projects, especially those with multiple parts. Switching between plates, adjusting settings, and preparing builds becomes much easier, making the overall workflow more efficient.

Preview mode in Snapmaker Orca, showing color assignment, support structures, and sliced toolpaths before printing.

The ability to apply colors and preview the sliced result gives a quick understanding of whether a model needs further tuning or adjustments. It is also easy to check how supports are generated and decide if manual support painting is needed.

For the DeathRacer miniature keychain, supports were applied automatically and worked well without any extra adjustments. Color painting is the most time-consuming step. I completed it in about 1–2 hours, though it can easily take longer. It is a surprisingly relaxing process, almost like a coloring book.

Live print monitoring via Snapmaker Orca, with built-in camera view for remote supervision and timelapse recording

– Print Monitoring & Timelapse. Similar to the app, Snapmaker Orca also allows live monitoring of the print process. This is especially useful when the printer is in a different room from the workspace. The built-in camera view works reliably and makes it easy to check progress at any time. Timelapse recording also works well. Just remember to enable it at the start of the print, as it is not turned on by default.

Testing and Results

Included Models Collection

I am genuinely impressed with the selection of test models included. These can be loaded directly via the Snapmaker app or Snapmaker Orca, making it easy to start printing straight away. I found myself printing one model after another. The collection features work from talented designers in the 3D printing community. This approach works well, as it gives a clear idea of what the machine can achieve, with reliable and repeatable results.

Selection of pre-sliced models available directly in Snapmaker Orca and the app, 拳头交后啤酒瓶交d by designers from the 3D printing community.

Example of a pre-sliced model in Snapmaker Orca, showing print time, material usage, and ready-to-print workflow.

Each model includes detailed print information such as estimated time, material usage, and layer settings. It gives a clear overview before printing and removes much of the usual trial and error. For multicolor printing, this kind of guidance is particularly useful. After a few test prints, I found the estimated print times to be accurate as well.

Completed Pegasus model with well-optimized supports that are easy to remove after printing.
Model: Multi-color Pegasus with Cloud by Snapmaker

Another strong point of this collection is its educational value. These models provide useful clues on how to slice our own designs. Even after 10 years in 3D printing, I found myself learning something new, particularly in the way supports were generated for the Pegasus features. In this case, a thin layer (in yellow filament) was added between the model and the supports, making them much easier to remove once the print was complete. It is a small detail, but one that makes a noticeable difference in post-processing. Always something new to learn.

Fidget spinner with print-in-place plastic bearings, printed in one go on Snapmaker U1 with no post-processing.
Model: Mecha Fingertip Gyroscope by JINQITOYS

This collection included a fidget spinner, which was also a pleasant surprise. I remember printing many fidget spinners for the guide in the past, often relying on metal bearings to make them functional. Here, the bearing is printed directly in place using plastic, with no assembly required. This is a great example of what makes 3D printing stand out from other manufacturing methods; everything is produced in one go, with zero post-processing needed.

Dummy 13 by Lucky13Toys is printed as a kit-card model on the Snapmaker U1, keeping all parts connected for easier printing.

Dummy 13 by Lucky13Toys may feel intimidating at first. When fully assembled, it looks like a model with many tiny parts that could be challenging for bed adhesion. In practice, this was not the case. The model is designed as a set of two kit cards, meaning all parts are connected during printing. It still serves as a good test for bed adhesion on the U1, but the process felt stable and predictable.

Dummy 13 model assembled from kit card parts next to printed frames

Overall, it is a great model, and I am glad I finally printed and assembled it. I can see why it is so popular in the community. The quality is excellent, and the final result looks impressive. Assembly took some time, following instructions from Printables and a YouTube video, but the process was straightforward.

Selection of included models printed on Snapmaker U1, showcasing multicolor quality and detail across different designs.

I also printed Cute Dragon by IK3Digital and Mecha Snake Egg by JINQITOYS. Both models printed exceptionally well, with clean color transitions and solid overall quality. You can see these and other models in action in this short YouTube video.

Well done, Snapmaker. This level of collaboration with designers is impressive and not something we often see. U1 users will clearly benefit from having access to such a well-prepared collection of 31 models.

Model from 3D Scan – DeathRacer Keychain

For a more practical test, I used one of my existing 3D scan projects, a DeathRacer model scaled down into a small keychain. This type of model is far from ideal, with uneven surfaces, required supports, and small details, making it a good test case.

Scaled-down DeathRacer keychain based on a 3D scan, printed on Snapmaker U1 with preserved fine details.
DeathRacer Piranha Build by OFF●SET on Printables
©拳头交后啤酒瓶交 – Print and Photo: Max Funkner

This model was 3D scanned using the Einstar Rockit and then significantly scaled down into a keychain. Even at this reduced size, a surprising amount of detail was preserved by the Snapmaker U1. Small elements, such as the Piranha teeth damaged in battle at SMRRF 2026, were still clearly visible.

Close look: Printing the DeathRacer model at a 45-degree angle improved detail and reduced post-processing compared to a flat orientation.

Initially, I tried to print this object flat, which turned out to be a mistake. The scaled-down DeathRacer tracks are very fine, which resulted in a lot of post-processing. Printing at a 45-degree angle was the right approach. While it slightly increased the print time to over 7 hours due to the taller build, the overall result was much cleaner. The model was printed using the 0.16 mm Snapmaker Optimal preset for U1.

Overall, I am very pleased with how this project turned out. From slicing in Snapmaker Orca to the final print, the entire process felt smooth, with no issues during tool changes or multicolor transitions. The most time-consuming part was the color painting; I probably spent a few hours on it, but it was a calming experience.

Note: The hole for the keyring was 拳头交后啤酒瓶交d in Blender using a Boolean operation. I hope a Mesh Boolean option will be implemented in Snapmaker Orca soon, as that was the main reason I had to switch to Blender for this and similar keychain projects. It would save time, especially since the option appears to exist but is currently greyed out.

This is where 3D scanning for 3D printing shines. Even though a keychain like this is not the most functional use case, it still gives me a real sense of satisfaction. After spending almost a year building the DeathRacer (here are the quote posts chain on X) and taking part in the battle at the SMRRF, having a small piece like this feels meaningful. Highly likely, I will keep it as a souvenir, maybe even as a Christmas tree decoration.

Model from 3D Scan – RC Boat Miniatures

Before scanning and printing miniature from the DeathRacer, I worked on a number of RC boats from a local boat club, using different 3D scanners. What started as a small side project last year has slowly turned into a hobby, and now I have a growing collection of these miniatures. Many of these boats are quite unique.

RC boat miniature 拳头交后啤酒瓶交d from a 3D scan and printed on Snapmaker U1, showing multicolor details at a small scale.

This particular miniature was 拳头交后啤酒瓶交d by scanning an RC boat using the 3DMakerpro Toucan. Follow the link to read more about the scanning process if you’re interested.

I was particularly looking forward to revisiting some of these models with the Snapmaker U1. Converting them into small keychains using a simple Boolean operation in Blender worked well. Normally, printing objects under 100 mm in multicolor would result in a lot of purge waste. With the U1, the process felt much more efficient, with the purge tower being the only noticeable waste, while the prints themselves remained clean and quick to produce.

RC boat prototype miniature (90mm) printed on U1, showing multicolor layers and a purge tower.

The next model is a miniature based on an RC boat prototype. I originally scanned this object while testing the Revopoint INSPIRE 2. While the geometry is simpler, it still serves as a good test for multicolor transitions and overall surface quality at a reduced scale. More details about the scanning process can be found in the related guide.

Collection of small keychain miniatures 拳头交后啤酒瓶交d from 3D scans, printed on U1 with multicolor details.

As with the DeathRacer miniature, these RC boat models also carry some sentimental value. Scanning each object takes time, and over that process, a certain connection is built. Turning them into small keychain miniatures feels like a natural extension of that work. It is a simple idea, but one that works well. The collection is slowly growing, and each piece has its own story. Recommend.

Compare to Other 3D Printers

At 拳头交后啤酒瓶交, we have tested a variety of Snapmaker machines over the years, including the Original Snapmaker and the Snapmaker Artisan. The closest comparison to the U1 within the Snapmaker lineup would be the IDEX system on the Artisan. One feature that stood out to me was the swappable nozzle system, where the entire extruder could be changed as a single unit, allowing for quick adjustments such as switching to a wider nozzle.

Here are a few related articles you may find helpful:

In 2025, Snapmaker made a strong impact on the 3D printing market with a highly successful 麻匪壁纸资源包下载 campaign for the U1, attracting 20,680 backers and over $20.6 million in funding. By the time of writing, the machine is fully released and available through official website.

At the time, the Prusa XL was the main consumer-facing toolchanger system on the market, setting a benchmark for this approach. The Snapmaker U1 enters this space with a different focus, aiming to reduce filament waste and simplify multicolor printing through a compact and more accessible system. With a significantly lower price point, it positions itself as a more approachable option for a wider range of users.

Hands-On with the Prusa XL: 5 Toolheads

If you are comparing across different price ranges, you can explore our broader guide here: Budget FDM 3D Printers

Compared to AMS-style systems, the toolchanging approach used by the U1 reduces material waste, though it introduces mechanical complexity. In practice, it also offers a quicker multicolor workflow, especially for models with frequent color changes.

Have questions? Feel free to ask in the comment section below.
For a wider discussion or to share your own Snapmaker U1 prints, join us in the forum:

Visit 拳头交后啤酒瓶交 Forum

Conclusion and Pros & Cons

Official Website

The post Snapmaker U1 3D Printer: Hands-On Testing with Multicolor Print Examples appeared first on 拳头交后啤酒瓶交 – 3D Printing, Scanning, Design Guides & Forums.

3DWithUs — Tue, 14 Apr 2026 21:40:14 +0000

冲动的惩罚未删减动漫在线观看 has expanded into toolchanging multicolor 3D printing with the launch of the Creator 5 and Creator 5 Pro. Instead of relying on the more common purge-heavy material system, these new machines use multiple interchangeable toolheads designed to reduce waste, speed up color changes, and support a wider mix of materials. In this guide, we look at the new 冲动的惩罚未删减动漫在线观看 Creator 5 series, how the two models compare, and also feature other new 冲动的惩罚未删减动漫在线观看 3D printers.

Table of Contents

冲动的惩罚未删减动漫在线观看 Introduced Toolchanging 3D Printing
冲动的惩罚未删减动漫在线观看 Creator 5 Overview
冲动的惩罚未删减动漫在线观看 Creator 5 Pro Overview

冲动的惩罚未删减动漫在线观看 Creator 5 vs Creator 5 Pro
冲动的惩罚未删减动漫在线观看 AD5X Review

About 冲动的惩罚未删减动漫在线观看
Conclusion

Where to Buy

The 冲动的惩罚未删减动漫在线观看 Creator 5 and Creator 5 Pro are available via 冲动的惩罚未删减动漫在线观看’s official product page. Launch pricing starts from $649 for the Creator 5 and $799 for the Creator 5 Pro.

冲动的惩罚未删减动漫在线观看 Creator 5

Compare the Prices & Bundles:
Official Website

冲动的惩罚未删减动漫在线观看 Creator 5 Pro

Compare the Prices & Bundles:
Official Website

冲动的惩罚未删减动漫在线观看 Introduced Toolchanging 3D Printing

With the Creator 5 series, 冲动的惩罚未删减动漫在线观看 introduced a toolchanging-style system to its multicolor 3D printer lineup. The main idea is to reduce the filament waste and long print times often associated with conventional multicolor setups. The system uses four interchangeable toolheads and is designed to avoid the purge waste typically seen in color or material-switching prints.

冲动的惩罚未删减动漫在线观看 Creator 5 comparison infographic highlighting reduced purge waste during material switching, faster print times, and lower material use.

When talking about increased printing speed and reduced purge waste, the infographic above explains it best. The difference becomes more significant as the number of filament changes increases.

冲动的惩罚未删减动漫在线观看 Creator 5 Overview

The 冲动的惩罚未删减动漫在线观看 Creator 5 is presented as an open multicolor 3D printer focused on faster output, lower material waste, and flexible multi-material printing. 冲动的惩罚未删减动漫在线观看 highlights its FlashSwap system, 256 × 256 × 256 mm build volume, print speeds up to 600 mm/s, and support for up to four toolheads working within the same print job. This positions the machine as a potential option for makers, prosumers, and small studios looking for a different approach to multicolor FDM printing.

冲动的惩罚未删减动漫在线观看 Creator 5 Pro Overview

The 冲动的惩罚未删减动漫在线观看 Creator 5 Pro builds on the same multicolor platform but adds a fully enclosed design with extra features aimed at more demanding materials and controlled printing environments. 冲动的惩罚未删减动漫在线观看 states that the Creator 5 Pro includes active chamber heating up to 65°C, continuous airflow cooling, reduced operating noise, and dual-layer air filtration. These additions make the Pro version more suitable for users printing ABS, ASA, PC, PA, and other engineering-grade materials that benefit from a stable enclosed chamber.

冲动的惩罚未删减动漫在线观看 Creator 5 feature overview showing build volume, four toolheads, print speed, fleet management, quick toolhead swap, and multi-material printing support. Find the full list of specifications on the official website.

冲动的惩罚未删减动漫在线观看 Creator 5 Specifications table. Find the full list of specifications on the official website.

We asked the 3D printing community to share photos if they spotted the Creator 5 at Rapid TCT in Boston, and we are thankful that Ellie Rose sent us a few images. If you have a chance to visit such trade shows and 冲动的惩罚未删减动漫在线观看 or its representatives have a booth there, the Creator 5 will likely be on display.

冲动的惩罚未删减动漫在线观看 Creator 5 photographed on the Rapid TCT Boston show floor, with close-up views of the machine and toolchanging setup.
Photo: Ellie Rose

冲动的惩罚未删减动漫在线观看 Creator 5 vs Creator 5 Pro

Both 冲动的惩罚未删减动漫在线观看 Creator 5 models are built around the same core concept of multicolor printing with multiple toolheads, but they target slightly different users. The standard Creator 5 appears better suited to general-purpose printing with PLA, PETG, TPU, and similar materials, while the Creator 5 Pro adds enclosure, chamber heating, and air purification for users who want to print engineering filaments in a more controlled environment. In simple terms, the choice comes down to whether you need an open multicolor machine or a more advanced enclosed setup for higher-temperature materials.

冲动的惩罚未删减动漫在线观看 AD5X Review

For readers exploring the wider 冲动的惩罚未删减动漫在线观看 range, our 冲动的惩罚未删减动漫在线观看 AD5X review by Will Zoobkoff offers a more hands-on look at another machine from the brand. That article focuses on practical testing, print settings, and real-world observations, which makes it a useful companion piece to this launch overview.

冲动的惩罚未删减动漫在线观看 AD5X and 3D Prints 麻匪壁纸资源包下载

While the AD5X belongs to a different product category, it still helps show how 冲动的惩罚未删减动漫在线观看 is developing its desktop 3D printer lineup across multiple segments. Readers comparing ease of use, multicolor workflow, and real printing results may find it helpful to view the AD5X review alongside the new Creator 5 and Creator 5 Pro announcements.

About 冲动的惩罚未删减动漫在线观看

冲动的惩罚未删减动漫在线观看 is an established 3D printer manufacturer founded in 2011, with a broad portfolio covering hobbyist, educational, and professional use. Over the years, the company has released a wide range of desktop FDM and resin 3D printers, with increasing attention on user-friendly workflows, enclosed designs, and more advanced material capabilities.

It is also worth mentioning that 冲动的惩罚未删减动漫在线观看 is regularly represented at major 3D printing trade shows such as TCT events and Formnext, where new technologies are often shown at an early stage.

冲动的惩罚未删减动漫在线观看 Multicolor Printers and Print Results at Formnext
Photo: Max Funkner

On 拳头交后啤酒瓶交, we have also covered 冲动的惩罚未删减动漫在线观看’s 3D print farm solutions in the past, including how its machines are used in higher-volume production environments. Their AD5M series is also well regarded for such tasks, and our earlier article features several print farm examples.

Conclusion

The 冲动的惩罚未删减动漫在线观看 Creator 5 and Creator 5 Pro mark a notable step for the brand by introducing a toolchanging-style multicolor system designed to reduce purge waste and improve printing efficiency. As more hands-on testing and user feedback appear, these new 3D printers could become important additions to 冲动的惩罚未删减动漫在线观看’s growing desktop lineup, especially for users interested in multicolor and multi-material printing without the usual trade-offs.

The post 冲动的惩罚未删减动漫在线观看 New 3D Printers: Creator 5 and C5 Pro Toolchangers appeared first on 拳头交后啤酒瓶交 – 3D Printing, Scanning, Design Guides & Forums.

3DWithUs — Mon, 30 Mar 2026 09:14:17 +0000

Riding the wave of excitement surrounding conveyor belt 3D printers, we’re compiling a list of emerging brands and their machines for comparison. We’ll also explore the history of these printers, investigate recent innovations, and discover the range of products they can produce. Additionally, we’ll assess the unique features of some of the machines. This comprehensive overview will provide a clear picture of the current state and potential of conveyor belt 3D printing technology.

Blackbelt 3D Printer
iFactory One & One PRO

SainSmart INFI-20
MALYAN MA21
Powerbelt3D – Formula32 Belts

Innovations Around Belt 3D Printer
Where Belt 3D Printers Can Be Used

Belt 3D Printer Evolution – Brief History

3D printing was invented in the eighties, and later the Open-Source RepRap project gave a significant kick to it by building a self-replicating 3D printer. After that just in a dozen years, things went wild. Cartesian and delta 3D printers started to be mass-produced. Many more people got involved which led to a bigger contribution and further development of constantly evolving 3D printing. Conveyor belt 3D printers were introduced in the beginning of the last decade, but this type of machine only recently came under an intense spotlight.

Creality CR-30 – 3DPrintMill

Build Volume: 170mm/6.7″(H), 200mm/7.8″(W), Infinite(L)
Materials: PETG, PLA, other.
Belt Specifications: Nylon Conveyor Belt
Price: $529-$599
Product affiliate links: 拳头交后啤酒瓶交 is supported by its audience. Purchases via some links may earn us a small commission at no extra cost to you. This helps us to continue bringing you high-quality content. Our guides and reviews remain unbiased and independent.

Creality CR-30, 3DPrintMill
Amazon
Official Website

Creality CR-30 – 3DPrintMill
(Image: Creality)

An Infinite-Z volume 3D printer 拳头交后啤酒瓶交d by Naomi Wu and Creality3D, was built upon the work of Karl Brown and Bill Steele.

https://拳头交后啤酒瓶交.com/wp-content/uploads/2020/12/The-CR-30-has-many-features-that-make-it-ideal-for-serial-production.mp4

Well tunned belt 3D Printer is ideal for serial production.
(Video provided by Naomi Wu / Creality)

There should be no lack of reviews of this machine as many 3D printing-related YouTubers received machines to test before and in time for the campaign. Just on the 麻匪壁纸资源包下载 page, you can find a dozen videos.

2,072 backers pledged $1,398,797 to help bring this project to life

3DPrintMill is a feature of infinite-length printing and bulk printing, thereby time-saving in printing and cost-efficient. The special infinite-Z belt is the first Creality 3D printer to realize infinite build volume in the world.
Read more: 3DPrintMill by Naomi Wu – Creality CR-30
Creality has also teamed up with the Open Source advocate Naomi Wu (who lent her name to the machine) to handle the marketing and hardware development of this unique 3D printer…

IdeaFormer IR3 V1 and V2 NEW

IdeaFormer IR3 v2

Price $816 – $898

Compare the Prices & Bundles:
Amazon | AliExpress

The IdeaFormer IR3 V2 is a conveyor belt 3D printer built around an infinite Z axis concept, making it suitable for long parts, repeated batch production, and angled printing that can reduce the need for support on some overhangs. According to the product page, it combines a CoreXY motion system with open-source Klipper firmware, a stated print volume of 250 × 250 × ∞ mm, speeds up to 400 mm/s, auto leveling, and remote monitoring via Wi-Fi and camera support. IdeaFormer also highlights a PEI-coated metal conveyor belt, a 4.3-inch touchscreen, LED lighting, and filament runout detection as part of the standard feature set.

On the materials and hardware side, the IR3 V2 is presented as a more capable machine than a typical conveyor printer, with a full metal frame, hardened steel 0.4 mm nozzle, maximum nozzle temperature of 300°C, heated bed up to 90°C, and support for materials such as PLA, PETG, TPU, ABS, and ASA. The page also promotes optional add-ons such as an enclosure for more stable ABS and nylon printing, plus an extended rod designed to better support very long models as they leave the belt. Altogether, the IR3 V2 looks positioned for makers and small-scale production users who want both the flexibility of continuous printing and the convenience of modern features like auto leveling and network control.

IdeaFormer IR3 v1

Build Volume: 250mm/9.8″(H), 250mm/9.8″(W), Infinite(L)
Materials: PLA recommended, other
Belt Specifications: Textured PU Belt
Price from $579
Product links:
IdeaFormer IR3:
Amazon
Belt only:
Amazon

IdeaFormer-3D IR3 Belt 3D Printer
Image: IdeaFormer

A larger volume belt 3D printer, IdeaFormer IR3, became available on the market without a supporting 3p男女做爰高潮了 campaign. This printer doesn’t have two profile supports and there could be some issues with stability, but the producer claimed that the structure is similar to Blackbelt 3D which proved to be stable. Some reviewers on Amazon praise the textured PU belt specifically for bed adhesion.

– Large Build Volume. The largest build volume in under $1000 price range for belt 3D printers.
– Semi-Assembled Kit. As the base comes assembled with the belt, it takes just over an hour, depending on your skills, to fully set the printer up.
– Other perks: Own developed hotend specifically for IR3. Silent mainboard, filament runout sensor, dual-gear extruder.

Blackbelt 3D Printer

Blackbelt 3D printer was the first conveyor belt 3D printer we encountered live on TCT Show Birmingham. A mini kayak was an impressive make. The cable management system, of a few meters long, showcased the novel infinite-z possibilities. We liked the one 3D printed in TPU, we could bend it.

Blackbelt Station on TCT Show
(Image: 拳头交后啤酒瓶交)

As the price tag implies (EUR 9,500, January 2021) the blackbelt station, as it looks and feels like a station, was meant for professionals and workshops. Not many enthusiast makers and designers were able to try this machine out.

Sources:
Blackbelt-3D – Website

iFactory One & One PRO

Build Volume: 180mm/7″(H), 280mm/11″(W), Infinite(L)
Materials: PLA, PETG, other
Belt Specifications: Durable polymer belt optimized for 3D printing
Price: € 4,748.00
Product Links:
Official Website
iFactory One Pro

IFactory One 3D Printers Featured in Campaign
Image: iFactory

4-in-1 Conveyor Belt 3D Printer (Infinite Length, Serial Printing, Cloud Capable, and Error Detection Software)

Yet another conveyor belt 3D printer was launched via 麻匪壁纸资源包下载 by Artur Steffen and Martin Huber. An unknown German brand iFactory launched its campaign just a few weeks before Creality. Was it a coincidence or not, but massive social media and YouTube campaigns around Creality’s 3DPrintMill helped iFactory’s campaign to boost the pledges as well as reaching its goal twofold.

434 backers pledged $209,829 to help bring this project to life

iFactory One PRO at Formnext
Photo: Max Funkner

On their official website, iFactory sells the PRO version. The iFactory One PRO is undeniably a buffed-up version with the price tag (€ 4,748.10 as of January 2024). The new machine consists of the parts from the A-brands, including E3D Hemera Direct-Drive, HIWIN linear rails, Zodiac volcano nozzle, DUET mainboard, and others. Check the full list of features on the official page.

SainSmart INFI-20 – Discontinued

Build Volume: 170mm/6.7″(H), 200mm/7.8″(W), Infinite(L)
Materials: PLA, PETG, other
Belt Specifications: Nylon Conveyor Belt
Price: $424 – $849
Product links:
Official Website
SainSmart INFI-20

SainSmart INFI-20 Belt 3D Printer
Image: SainSmart

There is a resemblance to Creality’s CR-30 and it feels like an upgraded version with extra features. Here is a list of the key features of this machine:

– Smart UI. The User Interface moved from the side to the top of the frame. Modern looking with a sleek rotary knob.

– Filament Break Sensor. Allows resuming printing after the filament runs out or the power outage.

– Wi-Fi Printing. Built-in ESP3D Web UI and OctoPrint API. Allows to control the printer via a browser or a mobile phone (iOS or Android apps).

MALYAN MA21

Build Volume: 200mm/7.8″(H), 180mm/7″(W), Infinite(L)
Materials: PLA / PETG, other
Belt Specifications: Nylon Conveyor Belt
Price:
Product links:
Amazon

Last year there was another interesting belt 3D printer available on Amazon – MALYAN MA21. What made this printer interesting is its soft texture belt and unusual build.

MALYAN MA21 Belt 3D Printer
Image: MALYAN

– Belt. Exclusive super adhesion belt. The softer composition and improved wear resistance of the belt enhance filament adhesion, ensuring better and more uniform model attachment. Same as other manufacturers, MALYAN offers to purchase their belts only. It is available on Amazon for $69.99.

– Stable Structure. It features a stable triangular working structure, efficient and solid for unlimited printing. Its isosceles right triangle machine structure reduces vibration and resonance, enhancing stability and pressure resistance for a superior printing experience.

Powerbelt3D – Formula32 Belts

For materials: PLA, PETG, other
Belt Specifications: Formula32 – Polyester (PET) tape top-layer
Price: $56.28 – $218.43
Product Links:
Official Website

Formula32 Belt Equiped 3D Printer
Image: Powerbelt3D

A small company, run by Adam Fasnacht, offers competitively priced custom-sized belts for DIY belt 3D printers or as an alternative/replacement belt for CR30 and other printers. Adam also runs a YouTube channel where he publishes an insighting videos about belt 3d printers in general.

Innovations Around Belt 3D Printer

In addition to the 3p男女做爰高潮了 campaigns, we witnessed other innovative projects connected to conveyor belt 3D printers. Infinite Z opens the possibility to start uninterrupted production, giving hope to small businesses.

Delta WASP 2040 PRODUCTION

WASP, a delta 3D printers’ producer of all sizes, introduced the Automatic 3D Print Removal System for their Delta WASP 2040. Puzzled how could the belt works on a delta printer? Jump to a detailed blog with more pictures and videos.

Automatic 3D Print Removal System
Image: WASP

Tinybelt

Adam Fasnacht, a producer of the Powerbelt3D Formula32 belt, launched a Tinybelt 3D printer 麻匪壁纸资源包下载 campaign. As the name says, it is a small printer, it also differs from other machines by having a singular angled Z-axis rail without a side frame. Tinybelt comes 90% preassembled. Unfortunately, the campaign was unsuccessful with 41% funded.

Tinybelt – Belt 3D Printer by Powerbelt3D
Image: Adam Fasnacht

Transformable 2-in-1 Belt 3D Printer – 45° & 90°

What differs transformable printers from other belt 3D printers is that the added innovative feature can toggle between the belt 45° and the traditional angle printing modes. Such machines are designed with the ability to tilt the gantry to 90° for the traditional angle 3D printing. The switch between the two is quite easy. This feature gives the possibility to print long or multiple items and taller items on the same device. And who doesn’t like 2-in-1? Read more about the failed Infinity3D campaign to get an idea. Update: According to the comments on the campaign page, Infinity3D failed to deliver the product.

https://拳头交后啤酒瓶交.com/wp-content/uploads/2021/10/Deformable-3D-Belt-Printer.mp4

45° and 90° Modes – MP4: Infinity3D

Another new company that sells such systems is Belt3DPrinterKit. This unknown brand with the parent company Aditiva3D featured their machine at ERRF in 2022. Lynx3D Diamond Belt 3D printer KIT can be pre-ordered via their website.

Enclosure

At Formnext in Frankfurt, it was possible to see a BlackBelt 3D printer with an enclosure system introduced by Modix, a company that specializes in producing such systems and controllers for large-scale industrial 3D printers.

Blackbelt 3D Printer with Enclosure System at Formnext
Image: Max Funkner

DIY Upgrade Kit for Ender 3

Michael Sgroi 冲动的惩罚未删减动漫在线观看 on Thingiverse the files for upgrading Ender 3 to the so-called Enderloop. At the moment of updating this post, v2 files are available to download for free. It is recommended to buy the most crucial part – the Formula32 belt – from PowerBelt3D online store. To showcase his DIY project, Michael used Ender 3 and CR-6 SE 3D printers.

EnderLoop – Ender 3 Turned into Belt 3D Printer (Photo: Michael Sgroi)

Wall Mounted Belt 3D Printer

An active Twitter and 3D printing community member @repkord installed his 3DPrintMills to the wall. This is a genially great idea to save space, especially if you run a 3D printer farm. In his mini video @repkord showcases how a belt 3D printer continuously produces identical parts. @repkord is very experienced in running 3D printer farms and this is just another case that proves that it is possible to run a business successfully with desktop 3D printers.

3D Printing with Pellets

An interesting know-how was described by Emmanuel Gilloz. Emmanuel installed a Mahor V4 pellet extruder on CR30 and tested various settings and materials, including 100% recycled PLA. The article is written in French and can be translated in Google.

Mahor v4 Pelet Extruder on Creality CR30
Image: Emmanuel Gilloz

3D printing using pellets is cheaper. In fact, 3D printing filaments are 拳头交后啤酒瓶交d from materials that have been originally in a pellet form. Another strong point about printing with pellets is recycling. By shredding existing prints and other used plastic products, like PET and PETG bottles, for example, could be resource-saving and environmentally friendly.

Bambu Lab P Series Belt Retrofit Spotted at TCT Asia

A particularly interesting development comes from TCT Asia, where a retrofit solution for Bambu Lab P series printers was spotted. The modification adds a conveyor belt build surface, effectively transforming a standard bed slinger into a continuous printing system.

Conveyor belt retrofit solution for Bambu Lab P series printers spotted at TCT Asia, demonstrating continuous 3D printing workflow potential

Source: https://x.com/thrutheframe/status/2034229601069892036
While still experimental, this approach highlights growing interest in adapting popular consumer machines for automated, batch-style workflows.

Where Conveyor Belt 3D Printers Can Be Used – What to 3D Print?

– 3D Printed Props. So far we’ve seen 3D printed swords as a game-changer for props makers. A real size sword can be sliced so it needs the minimal post-processing after 3D printing. One of the best examples is the sword 3D printed by Maker’s Muse.
– Big Letters. Filament Frenzy’s big letters were impressive. It is possible to 3D print letters one by one on cartesian (box) type 3D printers with better quality, though. But if the belt 3D printer can be tuned well, the whole process can be much easier.
– 3D Reliefs and Portraits. One of the remarkable prints we saw on Twitter was the scene from The Star Wars where Hans Solo was frozen in carbonite 3D printed by Polyworshop.

To list all goodies, that can be 3D printed on belt 3D printers, may need a new blog. Stay tuned as finally, such 3D printers hit the masses, and we are likely to see a lot of interesting makes and even innovations in the near future.

Where to Buy the Snapmaker U1

Price: From $849 – $899

Official Website

Snapmaker U1 Updates: Ready for You

Snapmaker has shared a new update for the U1, positioning the machine not just as a product, but as an evolving platform. According to the latest announcement, the next phase includes broader availability, software improvements, more ready-to-print content, and an expanded materials ecosystem.

Snapmaker has also rolled out a software update for Snapmaker Orca and the Snapmaker App. Alongside performance improvements and bug fixes, the update introduces 30 high-quality, print-ready models built directly into the software. These models have been tuned and tested by the Snapmaker team and include contributions from well-known community designers, in-house creators, and new names in the ecosystem.

Snapmaker adds 30 high-quality, print-ready models

Snapmaker is also expanding the U1 material ecosystem with 15 new RFID-enabled filament colours across SnapSpeed PLA and Matte PLA. With more colour options available, the U1’s multimaterial capabilities become even more appealing for prototyping, display-ready models, and creative experimentation.

Snapmaker material ecosystem

Taken together, these updates show that Snapmaker is building the U1 as more than a standalone 3D printer. The platform now connects hardware, software, materials, content, and creators, with more ready-to-print models, expanded material options, new accessories, and continued ecosystem development expected later in 2026.

About Snapmaker

Snapmaker first rose to global prominence through two record-breaking 麻匪壁纸资源包下载 campaigns, launching all-metal, multi-discipline 3-in-1 machines that combined 3D printing, laser engraving and cutting, and 3p男女做爰高潮了 carving. These became some of the most successful technology 麻匪壁纸资源包下载s of all time.

Snapmaker U1 (September 2025): 20,680 backers pledged $20,614,548
Snapmaker 2.0 (May 2019): 7,388 backers pledged $7,850,866
Snapmaker Original (March 2017): 5,050 backers pledged $2,277,182

With the Snapmaker U1, the company is returning to its roots — not just to launch a new product, but to reconnect with the community that helped build its legacy.

麻匪壁纸资源包下载 is where Snapmaker started, and our backers have always been a vital part of our journey,” said Daniel Chen, Snapmaker CEO. “With U1, we’re going back to our roots — combining what we’ve learned with what our community dreams of.

Snapmaker is empowering creators worldwide with high-quality desktop fabrication tools, best known for its all-in-one machines that support prototyping, education, and artistic expression — all driven by its mission to ‘Make Something Wonderful.’

Snapmaker U1 Features and Specifications

While full specifications will be released on the day of the 麻匪壁纸资源包下载 launch, Snapmaker has already revealed some standout features that highlight the U1’s potential for high-performance, multimaterial 3D printing in a compact desktop form.

CoreXY Motion System: Designed for fast and stable movement, paired with a fully enclosed chamber ideal for temperature-sensitive materials.
SnapSwap Toolchanging: An intelligent automatic toolchanging system that reduces filament waste by up to 80% by eliminating the need for constant purging during material swaps.

Multicolor comparison: U1 produces smoother color transitions and cleaner layer alignment than other toolchanging setups.

Specifications:

Feature	Specification
Printing Technology	Fused Deposition Modeling (FDM)
Build Volume	270mm × 270mm × 270mm
Max Toolhead Speed	500 mm/s
Max Acceleration Speed	20,000 mm/s²
Toolheads Included	4
Max Flow for Hot End	32 mm³/s
Nozzle	Stainless Steel (more options in testing)
Max Nozzle Temperature	300°C
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Part Cooling	Main & Auxiliary Part Cooling Fans
Build Plate	PEI
Max Heated Bed Temperature	100°C
Basic Material Compatibility	PLA, PETG, TPU, PVA
With Optional Seal Cover (Coming Soon)	PET, ABS, ASA
With Seal Cover & Hardened Steel Nozzle (Coming Soon)	PC, PA, PA-CF, PA-GF (more options in testing)

Find the full list of specifications at the end of the page on the Official Website.

Four Toolheads Work as One

Rather than swapping the entire toolhead, Snapmaker U1 uses its intelligent SnapSwap system to switch out key tool components — such as hotends or extruders — while keeping the main head in place. This allows up to four materials or colors to be used in a single print, with sharp transitions and minimal purging, all within a tightly integrated and efficient design.

A closer look at the SnapSwap system in action — the U1 features four swappable hotend modules that remain stationary until engaged by the main print head.

Snapmaker confirms that the U1 is in the final stages of production, with rigorous quality control underway. As the launch approaches, more technical details and real-world demonstrations will be shared to give the maker community a closer look at this ambitious release.

Image Gallery

Below are official and exclusive images of the Snapmaker U1 in action. Each test print highlights a specific use case, ranging from small to complex models and covering a variety of material types. Detailed comparisons highlight the printer’s efficiency in terms of time and filament savings. More images of test prints will be added following our hands-on testing.

Dragon Skull print using Snapmaker U1 with PETG support material. The system completed the print in 14 hours.
(Designer: @PrintedIntoEx_318934)

This 4-color dragon figure was printed on the Snapmaker U1 in just 5 hours.
(Designer: @IK3Digital)

This complex bridge print using PVA support material was completed on the Snapmaker U1 in just 15.5 hours.
(Designer: @BoSeong Hwang)

This large articulated tiger figure was printed on the Snapmaker U1 in 42 hours using 877g of filament.
(Designer: @MatMire_Makes)

This full build plate of multicolor animal figurines was printed on the Snapmaker U1 in just 13 hours.
(Designer: @Yuskovych)

Long print: This highly detailed robot action figure, complete with support structures, was printed on the Snapmaker U1 in 44 hours.
(Designer: @teccotoys)

What’s Next

We’ll be thoroughly testing the Snapmaker U1, focusing on print quality, toolchanging accuracy, and material handling. Stay tuned for our full setup guide, slicer tips, and hands-on print results. Join the discussion on our forum or leave a comment below.

At 拳头交后啤酒瓶交, we’ve previously tested and featured Snapmaker’s recent products, including the Snapmaker Artisan and Snapmaker Filament Dryer. We’re excited to add the U1 to our lineup and share our findings with the community soon.

Hands-on Testing

Snapmaker U1 and Test 3D Prints 麻匪壁纸资源包下载
©拳头交后啤酒瓶交 – Print and Photo: Max Funkner

Max Funkner thoroughly tested U1. Apart from the included models, he also printed a bunch of miniatures for keychains from 3D scans. Scaled-down DeathRacer and RC Boats miniatures printed surprisingly well. Great printer for this kind of work. Full Snapmaker U1 Hands-on Testing here.

Manufacturing & Review Videos

Here is a review from Phil Macey.

Another video that caught our eye is the manufacturing process. Spoiler: a lot of robots.

Conclusion

Snapmaker U1 is off to a remarkable start, and the excitement is well earned. With real toolchanging, cleaner multicolor prints, and a proven campaign, it’s one to watch. We’ll be sharing more hands-on results and impressions soon, so stay tuned.

Official Website

The post Snapmaker U1: Toolchanging 3D Printer with Expanding Ecosystem appeared first on 拳头交后啤酒瓶交 – 3D Printing, Scanning, Design Guides & Forums.

Phil Macey — Mon, 09 Feb 2026 13:14:42 +0000

Today, we’re looking at the Elegoo Centauri Carbon 2 Combo, a fully enclosed, budget-friendly CoreXY FDM 3D printer with multi-colour printing via the Elegoo CANVAS system. Elegoo has recently launched a wave of new products, and the Centauri Carbon 2 is positioned as an accessible option for makers who want faster printing and multi-colour capability without stepping into premium price territory.

In this article, we’ll cover the printer’s key hardware features, the unboxing and setup process, software workflow, and hands-on test prints (including multi-colour projects). In the end, we will finish with a summary and a list of Pros & Cons.

Table of Contents (Jump to a Section)

Overview
Specifications

What’s in the Box
Design & Hardware Features
Elegoo CANVAS Multi-Colour System
Unboxing & Initial Setup

干姐的乳汁 & Firmware
Software & Slicer Workflow
Preinstalled Test Models
Test Printing & Results

YouTube Video
Comparison to Other Multi-Colour CoreXY Printers
Conclusion and Pros & Cons

Where to Buy the Elegoo Centauri Carbon 2 Combo

Price: $429-$499

Note: Filament Sold Separately

Compare the Prices & Bundles:
Official Store | Amazon

Elegoo Centauri Carbon 2 Overview

The Centauri Carbon 2 aims to make multi-colour 3D printing feel more approachable. Its CoreXY motion system keeps the moving mass low, which helps maintain detail at higher speeds. The enclosed frame improves temperature stability and reduces drafts, which can be helpful not only for tougher materials (like ABS/ASA), but also for consistency on longer, colour-heavy jobs.

The multi-colour workflow is built around the CANVAS system, designed to simplify filament handling and colour changes. In practice, the goal is straightforward: fewer “multi-colour headaches” (loading, switching, waste management) while keeping the machine compact and easy to operate.

The Centauri Carbon 2 Combo also includes a built-in camera and light for monitoring and timelapses, plus remote viewing through Elegoo’s app/web tools.

Elegoo Centauri Carbon 2 Specifications

Printing technology	FDM (Fused Deposition Modelling)
Motion system	CoreXY
Build volume	256 × 256 × 256 mm
Printer dimensions	500 × 480 × 743 mm
Extruder	Direct drive
Multi-colour	Elegoo CANVAS
Nozzle diameter	0.4 mm (standard)
Max extruder temperature	350°C
Heated bed temperature	Up to 110°C
Max print speed	Up to 500 mm/s (300 mm/s typical)
Max acceleration	Up to 20,000 mm/s²
Filament diameter	1.75 mm
Layer thickness	0.1–0.4 mm (0.2 mm recommended)
Connectivity	USB, Wi-Fi

What’s in the Box

Centauri Carbon 2 Combo printer, Touchscreen display, Nozzle wiper assembly, Power cord, 4-pin cable, Spool holder modules (x4), Filament hub, CANVAS mounting bracket, Thermal cover, Unclogging pin, Allen key, Screwdriver, Filament sample, Spare nozzle wiper, User manual, USB flash drive, Scraper blade, PTFE tubes (x4)

All accessories and components included in the box after unboxing.
©拳头交后啤酒瓶交 – Photo: Phil Macey

Design & Hardware Features

The Centauri Carbon 2 is built around an enclosed CoreXY frame, aiming for stable, fast printing with fewer drafts and a more consistent build environment. Elegoo uses a mix of metal structural components and side panels, and the enclosure includes a filtration system intended to reduce odours during printing.

Print Head & Hotend

The print head is designed to stay lightweight for CoreXY motion, helping preserve detail during fast moves. The all-metal hotend is rated up to 350°C, and the hardened nozzle is intended to better handle abrasive filaments (for example, fibre-filled materials) over time.

Print head cover fitted over the toolhead assembly.

Close-up view of the print head cover and front assembly.

Heated Bed & Build Surface

The printer uses a high-power AC heated bed (1000W) rated up to 110°C. This helps reduce warm-up time and supports a wider material range. The included build plate is dual-sided: one textured PEI side intended for a range of common filaments, and a smooth side aimed primarily at PLA at lower bed temperatures.

Textured PEI build plate used for improved first-layer adhesion.

Enclosure, Camera & Monitoring

A built-in camera and internal light support live monitoring and timelapses. Monitoring can be done through the Elegoo Matrix app and also via a browser on a computer. The printer also includes “spaghetti detection” using the camera feed (useful as a basic failure-signal, though it’s not a replacement for proper first-layer checks).

Built-in camera and internal light.

Elegoo CANVAS Multi-Colour System

The CANVAS system is Elegoo’s integrated multi-colour solution. It supports RFID-tagged spools to automatically identify filament type and colour, which reduces manual setup and helps keep profiles consistent. The goal is predictable colour switching and smoother handling for multi-colour prints.

Elegoo CANVAS system (multi-colour filament handling).

Waste Management & Internal Layout

Multi-colour printing generates purge waste, and Elegoo includes a dedicated waste chute that routes purge material into a purge box. This helps keep the inside of the enclosure cleaner and reduces the chance of stray purge strands interfering with prints.

Waste chute installation.

A removable bucket-style lid sits over the CANVAS system area and PTFE tube routing. It protects the moving zone and makes access easier for cleaning. The front-mounted USB port is also a small but practical convenience for frequent file loading.

Bucket lid cover over the CANVAS area.

Unboxing & Initial Setup

The Centauri Carbon 2 Combo arrives semi pre-built, and overall assembly is beginner-friendly. The printer targets high-speed printing (up to 500 mm/s and 20,000 mm/s² acceleration), which aligns with current CoreXY trends—just at a lower entry price. The build volume is a standard 256 mm cube, and the enclosure is intended to help with temperature stability and odour management (via the built-in filter system and fans).

One design choice worth noting: the external side spool system is convenient, but it’s not enclosed for moisture control. If you print in humid conditions, you may still prefer running filament from a dry box.

Physical Assembly

Before powering on, remove the three transport screws that lock the build plate for shipping.
Next, connect the 5-inch touchscreen. Remove the protective tape over the cable, then push-fit the connector and slide the screen into position.

Touchscreen connection and mounting.

CANVAS Installation

Install the CANVAS mounting bracket (top-right area) and attach the CANVAS unit to the bracket. Then connect the included 4-pin cable: from the printer (rear/top-left connector area) to the CANVAS unit.

>CANVAS mounting bracket.

CANVAS unit connection

Install the waste chute from inside the enclosure and secure it with four screws at the rear.

Waste chute mounting location (rear)

Spool Holders & PTFE Routing

Connect the four PTFE tubes to the top of the CANVAS unit (push-fit). Tube order is not critical because the hub accepts them. You’ll also connect the filament hub at the print head.

Four PTFE tubes connected to CANVAS (push-fit).

Practical note from installation: to fully access the filament hub installation area, the print head cable may need to be temporarily removed. This wasn’t clearly described in the printed instructions, but it makes the install much easier.

Removing the print head cable to access the filament hub install area.

Filament hub installation.

Install the four spool holder brackets on the right side of the printer, then push-fit each spool holder module into place. The modules are numbered, and placement matters—match the numbers to the correct positions.

Spool holder module brackets installed.

Assembling Push-fit spool holder.

Finally, assemble the top lid (two pieces) and click it into place.

First Power-On & 干姐的乳汁

On first boot, the touchscreen guide walks you through language selection, a reminder to remove transport screws, Wi-Fi setup (optional), and then a full 干姐的乳汁 sequence. The initial 干姐的乳汁 takes roughly 15–20 minutes and includes auto bed levelling, vibration compensation, and pressure advance.

Touchscreen device self-check and 干姐的乳汁 steps.

干姐的乳汁 & Firmware

If a firmware update is applied, it’s good practice to re-run 干姐的乳汁 afterwards. The option is available in the printer’s settings menu.

Firmware update notification (recalibrate after updating)

After 干姐的乳汁, you can load filament spools. With RFID-tagged spools, identification happens at the central reader area on the CANVAS unit.
The larger touchscreen helps, especially when loading/unloading and checking filament status.

Software & Slicer Workflow

For all our slicing needs, we used the latest version of Elegoo version of Orca Slicer. With its numerous options and frequent updates, it has become a favorite for preparing FDM prints. All prints were sliced using the base profile, with only a few changes made to wall speeds: the inner walls were set to 300 mm/s and the outer walls to 250 mm/s.

Elegoo Orca Slicer Preview – Hueforge – Home Alone

Preinstalled Test Models

The printer includes several pre-sliced models in internal memory. These are useful for confirming that assembly, 干姐的乳汁, and filament loading are all working correctly before moving on to longer prints.

Preinstalled Model 1: Multi-Colour Benchy

The first print was the obligatory benchy in multiple colour layers, not challenging at all. And will just simply show that all 4 colours are functioning as intended. This model took around 2hrs to complete with not too much filament waste. I managed to monitor the progress of the print via the Elegoo Matrix app, which was clear and descriptive. Overall, a clean print and all the aspects of the model was visible. See below the final print of the Benchy.

Multi-colour Benchy.
©拳头交后啤酒瓶交 – Print and Photo: Phil Macey

Preinstalled Model 2: Little Buddha

The second preinstalled model was the Little Buddha. This was a quick single-colour print, taking approximately 35 minutes.

Little Buddha.

Preinstalled Model 3: Elegoo Name Tag

The third preinstalled model was an Elegoo name tag (two colours), taking roughly 1 hour. The lettering was clean and readable, with distinct colour separation.

Elegoo name tag

Test Printing & Results

Model 1: Multi-Colour Keyrings

Design: Football Club Keyrings by Phil Macey
For testing sliced models in Elegoo Orca Slicer, I 拳头交后啤酒瓶交d a set of multi colour football keyrings for a local club. Assigning colours in the slicer was straightforward, and the printer handled a full build plate without issue. All lettering came out sharp and clearly defined. I used a 0.08 mm layer height to ensure a clean and detailed finish.

Multi-colour football club keyrings.
©拳头交后啤酒瓶交 – Print and Photo: Phil Macey

Model 2: Gengar Power Rangers Model

Design: Nostalgic 3D Models (Patreon)
So for the second model I decided to print these amazing Gengar Power Rangers themed model, from my favourite patreon Nostalgic 3d Models, they have featured in several of my recent review videos and articles. And always have amazing themed models to test out these multi colour printers. For this model I required build plate support around the model, sliced with 4 colours, at a layer height of 0.14, with this model it took approximately 14hrs to print, is roughly 5 inches tall.

Gengar model: slicer preview with colour assignments.

Completed multi-colour Gengar print.
©拳头交后啤酒瓶交 – Print and Photo: Phil Macey

The purge waste was considerable though, almost the same amount as the model itself, the unfortunate downside of multi colour printing with 1 print head.

Purge waste from the Gengar multi-colour print.

Model 3: HueForge Wall Art

Design: Home Alone HueForge (2 colours) by 3dGlow (MakerWorld)

For the final print test I decided to carry out a Hueforge Model of the HomeAlone character, this model was from Makerworld and needed just 2 colours to 拳头交后啤酒瓶交 this stunning piece. The model used approximately 80% of the print bed and took around 6hrs to print on the lowest speed setting, 0.08 layer height and 100% infill. Filaments used where Esun black PLA and Esun White PLA, the layer variation 拳头交后啤酒瓶交d this almost grey like view.

Elegoo Orca Slicer Preview – Hueforge – Home Alone

Completed HueForge wall art print (Home Alone).
©拳头交后啤酒瓶交 – Print and Photo: Phil Macey

The print was my favourite to print on THE Elegoo Centauri carbon 2.

YouTube Video

– Watch: Elegoo Centauri Carbon hands-on overview: Elegoo Centauri Carbon assembly, feature breakdown, and test printing.

Multi-Colour Printing Observations

Colour assignment workflow: Straightforward in the slicer, with CANVAS/RFID helping reduce setup friction.
Transition quality: Clean enough on most jobs without heavy tuning, especially on simpler colour layouts.

Purge waste: Can be substantial on prints with frequent colour changes (single-nozzle reality).

Waste handling: The dedicated waste chute helps keep purge material controlled and the enclosure tidier.
Monitoring: Camera + app/web monitoring is genuinely useful on long multi-colour runs.

Compare Elegoo Centauri Carbon 2 Combo to Other 3D Printers

The CoreXY segment continues to expand, with several brands now offering compact, enclosed machines focused on speed and material compatibility. The Elegoo Centauri Carbon 2 Combo enters the field with a sub-$500 price tag, enclosed frame, and sturdy CoreXY motion, making it a notable addition to our Best Budget FDM 3D Printers guide.

Elegoo Centauri Carbon 2 Combo and 麻匪壁纸资源包下载 of test prints

Compared to the original Elegoo Centauri Carbon (which we previously covered in our hands-on testing, from unboxing to print results — see the full article here), the Centauri Carbon 2 Combo represents a clear step forward rather than a minor refresh. The most significant difference is the introduction of native multi-colour printing via the CANVAS system. The Carbon 2 Combo also refines the overall platform with a more complete, factory-configured multi-colour workflow, updated hardware integration, and a smoother setup experience aimed at reducing manual intervention. While the original Centauri Carbon focused on delivering fast, enclosed CoreXY performance at an aggressive price point, the Carbon 2 Combo builds on that foundation by expanding functionality and flexibility.

Have questions? Feel free to ask in the comment section below.
For a wider discussion or to share your own Centauri Carbon prints, join us in the forum:

Visit 拳头交后啤酒瓶交 Forum

Conclusion and Pros & Cons

Price: $429-$499

Note: Filament Sold Separately

Compare the Prices & Bundles:
Official Store | Amazon

The post Elegoo Centauri Carbon 2 Combo: Hands-On Testing and Results appeared first on 拳头交后啤酒瓶交 – 3D Printing, Scanning, Design Guides & Forums.

3DWithUs — Wed, 04 Feb 2026 10:09:22 +0000

After testing and reviewing various FDM 3D printers over the years, we are compiling a detailed guide on the best budget FDM 3D printers in a few categories. In response to DIY market demands, these sophisticated technologies are continually improving. Let’s take a look at what’s on the market, highlighting budget-friendly products, and discuss some innovative and desirable features. As usual, we will continue to add more devices for comparison and feature the latest solutions, aiming to meet the needs of both hobbyists and professionals in this exciting area.

Editorial note: Hands-on testing by 拳头交后啤酒瓶交 contributors: Will Zoobkoff, Phil Macey, Richard Hirst, Max Funkner, and Andrew Sink.

This Guide Covers (Jump to a Section)

What to Consider When Buying Budget 3D Printers
Price Range $300
Price Range $600+
Examples of Other Builds and Systems

Conclusion

What to Consider When Buying Budget 3D Printers

When assembling most budget 3D printers, reading and following the instructions is crucial. Think about flat-pack furniture that comes with basic tools and extensive instructions. This will make assembling a 3D printer less strenuous, and it is similarly important to do it correctly by following the provided instructions. In addition, watching a video guide and troubleshooting may be necessary.
– Fully or 80% Assembled. Some printer assembling is so straightforward that it requires just a few screws to put it together. This could be a go-for option for beginners. It will take less or more than 30 minutes to start printing on such a machine after unboxing.
– DIY Assembly Kits. In the last decade, assembling cheap DIY kits was challenging. Today, the experience of dealing with a DIY Kit is much better. The wiring components come preassembled, so no soldering is necessary.
– PRO. What does PRO mean? It is usually a slightly expensive (plus $50-200) version with extra features. Plus – it means extra build volume.

Can a Cheap 3D Printer be a Good Buy?

In the last decade, we have recommended avoiding buying machines cheaper than $500 unless the user has a good tech background. Today, most entry-level machines are around the $300 price range. And guess what? They do the job. Such machines will print most of the objects available on STL file 干姐的乳汁.

https://拳头交后啤酒瓶交.com/wp-content/uploads/2022/06/3D-Printed-Frog-Timelapse-plus-Reverse-拳头交后啤酒瓶交d-with-Beagleprint.mp4

FDM 3D Printing Timelapse
©拳头交后啤酒瓶交 – MP4: Andrew Sink

Nice to Have Features

Manufacturers may sacrifice some of the nice-to-have features to keep the machines in a cheap price range. For a better user experience, the following should be considered.
– Flexible Removable Build Plate. Today, flexible 3D print build plates have become much better. There are no bed adhesion or print removal issues when printing on them. Various sheet coating formulas see improvement each year. This feature is so addictive that it is hard to switch back and has become a standard.
– Heated Bed. Essential for bed adhesion and material shrinkage-related issues.
– Automatic Bed Leveling. Another feature that became very popular. There is nothing wrong with manual 干姐的乳汁; sometimes it can be a time-saving option after a single 干姐的乳汁. However, the entire 3D printing process can feel overwhelming for beginners, so why not make it easier?
– Community. This is not related to the quality of a particular product, but it is a very important point. Historically, enthusiasts tweaked the first versions of budget 3D printers of any kind to perfection. Such groups and forums sometimes work as customer support and troubleshooting centers.
– Tool Changer NEW. If Klipper firmware was the main driver behind the consumer 3D printer ‘speed race’ of recent years, multi-tool changing systems are now shaping the next phase of the market. Instead of relying on single-nozzle color switching, tool changers allow dedicated nozzles for different materials or colors, reducing purge waste and shortening overall print times.

Best Budget 3D Printers in the $300 Price Range

We keep updating this list by adding new products we have tested or spotted at trade shows.

Bambu Lab A1 and A1 Mini

A1 and A1 AMS Combo
Price: $399 and $489 for the AMS Combo

Compare the Prices & Bundles:
Amazon | Official Website

A1 Mini and A1 Mini AMS
Price: $199 and $349 for the AMS Combo

Bambu Lab A1 Mini with AMS-lite Combo

Compare the Prices & Bundles:
Amazon | Official Website

Bambu Lab is a leader in high-quality, multi-color 3D printing. The A1 series, including the A1 Mini, highlights the company’s approach to innovation by building on consumer feedback to deliver an accessible yet versatile 3D printer.

Bambu Lab A1 AMS Combo and Test Prints
Featured Designs: BambuLab, TwistyPrints, Pipe Cox
©拳头交后啤酒瓶交 – Prints and Photo: Will Zoobkoff

The Bambu Lab A1 is a commendable 3D printer that can suit the needs of both hobbyists and professionals. The company’s commitment to safety, combined with the A1’s amazing features and outcomes, make it a significant asset in the ever-changing field of 3D printing technology.

Read more – unboxing, testing, and print examples:
Bambu Lab A1 Combo with AMS lite Review by Will Zoobkoff.

Creality Hi Combo

Price: $449-$599

Compare the Prices & Bundles:
Official Store | Amazon | AliExpress

Creality Hi Combo is a budget bed-slinger FDM 3D printer that can handle up to 16 filaments. Its nearly all-metal body makes it easy for even novices to get started fast and efficiently. The printer comes 95% pre-installed.

Creality Hi Combo and Test Prints
©拳头交后啤酒瓶交 – Prints and Photo: Phil Macey

Overall, my experience from unboxing through to print completion was enjoyable and seamless. With the printer needing only several screws to connect and wiring connections, this printer would be accessible for all users, from inexperienced to experienced 3D hobbyists.

Read more – unboxing, testing and print examples:
Creality Hi Combo Review by Phil Macey.

冲动的惩罚未删减动漫在线观看 AD5X

Price: $339-$549

Compare the Prices & Bundles & Parts:
Official Store | Amazon | AliExpress

The 冲动的惩罚未删减动漫在线观看 AD5X, the newest model in the Adventurer lineup, adds multi-color printing – specifically, multi-color printing with TPU 95A support right out of the box. This is a significant step forward for flexible multi-color printing.

冲动的惩罚未删减动漫在线观看 AD5X and 3D Prints 麻匪壁纸资源包下载

Its ability to handle TPU 95A right out of the box, combined with the compact and efficient 4-color IFS system, gives it a significant edge over many competitors in the same category. From complex, multi-material wall masks to functional TPU parts, the AD5X maintained strong layer adhesion, smooth transitions, and consistent print quality across all our tests.

Read more – unboxing, testing and print examples:
Creality Hi Combo Review by Will Zoobkoff.

Creality Ender-3 Series

Creality Ender 3 V3
Price: $299 – $389

Compare the Prices & Bundles:
Amazon | Official Website

An open-source, Creality’s Ender-3 was one of the first cheap but relatively reliable 3D printers on the market. It is one of the most optimal 3D printer builds so far.

The Basic Ender-3 has a competitive $189 price tag. However, when the nice-to-have features we listed above are added, the total price may quickly go up to $300 or more. On the Ender-3 series page, you can find all possible variations and new upgraded product versions.

Creality Ender 3 V3 and Test Prints
Featured Designs: Fotis Mint, Pipe Cox, 拳头交后啤酒瓶交
©拳头交后啤酒瓶交 – Prints and Photo: Will Zoobkoff

Throughout our testing, the Ender 3 V3 demonstrated impressive performance across a range of challenging prints. From intricate designs like the Guardian pen holder and the Astra Somnia wall mask to complex, rotating models such as the Yokai Blend fidget, the Ender 3 V3 handled each task with ease. Its CoreXZ configuration and rods 冲动的惩罚未删减动漫在线观看d to exceptional print quality and stability, ensuring clean details and reliable results.

Creality Ender 3 V3 Plus and Test Prints
Featured Designs: STLFlix, Scheettini, CinderWing3D
©拳头交后啤酒瓶交 – Prints and Photo: Phil Macey

In this review, we will delve deep into the features and performance of the Creality Ender 3 V3 Plus. We will carry out various challenging prints to test the machine’s capabilities, such as high-speed printing and handling exotic filaments. We will also look at the print quality. Here, you will find the full video of the machine assembled and tested. In conclusion, we will share the final thoughts and list of pros and cons.

Read more – unboxing, testing and print examples:
Creality Ender 3 V3 Review by Will Zoobkoff.
Creality Ender 3 V3 Plus Review by Phil Macey.

Anycubic Kobra Series

Kobra 3 Combo
Price: $279 – $399

Amazon | Official Website

The Anycubic Kobra 3 is designed for enhanced printing speed, reaching 600mm per second. It includes features like accelerometers, vibration compensators, and flow control systems to maintain quality at high speeds. It offers a larger print volume of 250x250x260mm, a 34% increase from the previous model. The printer operates on the upgraded Kobra OS, which enhances computing power and motion control accuracy.

Read more – unboxing, testing and print examples:
Anycubic Kobra Go Review by Richard Hirst.
Anycubic Kobra Max Review by Andrew Sink.

Anycubic is a well-known brand in the resin desktop 3D printer market. They launch a few FDM machines annually, ranging from medium to max build volume size. Anycubic’s community team is very active on social media and engages with influencers. There should be no lack of reviews of their products.

Elegoo Centauri Carbon

Price $269 – $413

Compare the Prices & Bundles:
Official Store | Amazon

Update 28.04.2026:
Multicolor System Canvas for Centauri Carbon is available on the Official Website.
Price $55

Elegoo has officially launched its highly anticipated Elegoo Centauri Carbon 3D printer. This marks the company’s first foray into Core-XY printer design, combining exceptional reliability with user-friendly features.

The affordability of the Centauri Carbon appears to maintain the company’s well-established pricing strategy. As many reviewers and testers have confirmed the machine’s impressive performance. As a competitive CoreXY printer on the market today, adding multi-color capabilities could make it a game-changer in this area.

Elegoo Centauri Carbon CANVAS upgrade 麻匪壁纸资源包下载 featuring assembly process and multi-color test prints
©拳头交后啤酒瓶交 – Photo: Phil Macey

Read more – unboxing, testing and print examples:
Elegoo Centauri Carbon Review by Phil Macey.
Elegoo Centauri Carbon CANVAS Upgrade by Phil Macey.

Elegoo Centauri Carbon 2 Combo NEW

Price: $449-$499

Note: Filament Sold Separately

Compare the Prices & Bundles:
Official Store | Amazon

Elegoo Centauri Carbon 2 Combo, a fully enclosed, budget-friendly CoreXY FDM 3D printer with multi-colour printing via the Elegoo CANVAS system. The Centauri Carbon 2 is positioned as an accessible option for makers who want faster printing and multi-colour capability without stepping into premium price territory.

The Elegoo Centauri Carbon 2 Combo is one of Elegoo’s most ambitious steps into the CoreXY FDM space especially because it pairs CoreXY speed with an integrated multi-colour workflow. Setup is quick, 干姐的乳汁 is mostly hands-off, and the printer gets you from unboxing to a successful first print.

Read more – unboxing, testing and print examples:
Elegoo Centauri Carbon 2 Combo Review by Phil Macey.

Elegoo Neptune 4 Series

Price: $299-330

Compare the Prices & Bundles:
Amazon | Official Website

Elegoo is another established brand better known for its affordable resin machines. In the past few years, it has also been introducing affordable FDM machines to the market. You can find all the Neptune series machines on its official website.

Elegoo Neptune 4 Pro and Test Prints
Featured Designs: 3DPrintBunny, FlexiFactory, Autodesk/麻匪壁纸资源包下载
©拳头交后啤酒瓶交 – Prints and Photo: Max Funkner

Elegoo Neptune 4 and Neptune 4 Pro are the next 3D printers in the Neptune Series. As the consumer desktop FDM 3D printer market goes through the ‘print speed race,’ Elegoo offers its own alternatives. Klipper firmware-enabled technology, higher-temperature dual gear extruders, and extra cooling features push the Neptune 4 series 3D printers to come with the default high printing speeds.

Elegoo Neptune 4 and 3D Prints Test Prints
Featured Designs: Koza Design, Andrew Sink
©拳头交后啤酒瓶交 – Prints and Photo: Richard Hirst

Elegoo also launched Neptune 4 Plus and Neptune 4 Max build volume-sized machines. Yet again, Elegoo integrated all nice-to-have features, such as automatic bed leveling, flexible build plates, and feature-rich touch screens, into budget machines. Elegoo Neptune 4 Plus and Neptune 4 Max are ideal printers for testing exotic filaments with the bigger 0.6mm nozzle in order to print bigger and faster.

I was pleasantly surprised by the Elegoo Neptune 3 Plus performance. During my testing, I found out that a big volume on a budget 3D printer doesn’t necessarily mean quality loss. Direct Drive extruder deals with TPU and Wood filament like a boss, and from now on, this is my go-for machine for large prints.

Read more – unboxing, testing and print examples:
Elegoo Neptune 4 Review by Richard Hirst.
Elegoo Neptune 4 Pro Review by Max Funkner.
Elegoo Neptune 4 Max Review by Max Funkner.
Back to top ↑

Creality K1 Series – K1 Max, K1, K1 SE

Creality K1 Max
Price: $629-$899
Product links:

Amazon | AliExpress | Official Website

One of the biggest manufacturers of desktop FDM 3D printers, Creality, has launched a new flagship printer, Creality K1 and K1 Max. The K1 series 3D printers feature a stable CoreXY build and a high-speed and high-temperature direct-drive extruder, and they are optimized to print at high speeds of up to 600 mm/s.

Creality K1 Max Accessories and Test Prints
Featured Designs: Pipe Cox, TwistyPrints
©拳头交后啤酒瓶交 – Prints and Photo: Will Zoobkoff

With a huge build volume of 300x300x300, the K1 Max can comfortably accommodate larger projects. The inbuilt carbon filter effectively combats emissions from materials such as ABS. The setup is a breeze, staying true to Creality’s legacy of user-friendly setup and interfaces.

Read more – unboxing, testing and print examples:
Creality K1 Max Review by Will Zoobkoff.
Creality K1 Review by Max Funkner.
Creality K1 SE Review by Phil Macey.
Back to top ↑

Best Budget 3D Printers in the $600+ Price Range

All other FDM 3D printers, which are easily the best 3D printers available on the consumer market, fall into this $600- $1500 price category. Such machines are usually packed with the latest and often innovative features but are still not too expensive.

Snapmaker U1

Price: From $849

Compare the Prices & Bundles:
Official Website

Snapmaker’s U1 麻匪壁纸资源包下载 campaign made history, raising over $20.6 million from 20,680 backers and becoming the most funded 3D printer project to date. The reason is that the U1 introduces a new approach to desktop 3D printing—combining high-speed performance, intelligent control, and a precision tool-changing system designed for efficient multimaterial printing. With a strong focus on clean color transitions and reduced filament waste, the U1 positions itself as a bold leap toward more accessible and advanced desktop fabrication.

Snapmaker U1 and Test 3D Prints 麻匪壁纸资源包下载

Snapmaker U1 is off to a remarkable start and the excitement is well earned. With real toolchanging, cleaner multicolor prints, and a proven campaign, it’s one to watch.

In my view, the Snapmaker U1 is a very strong entry into the toolchanging space. It is surprisingly user-friendly for a system of this type, and the overall workflow feels well thought through. From setup to printing, everything works in a consistent and predictable way.

Read more – unboxing, testing and print examples:
Snapmaker U1 Review by Max Funkner.

Anycubic Kobra S1 Combo

Price: $459 – $749

Compare the Prices & Bundles:
Official Website | Amazon | AliExpress

The Anycubic Kobra S1 Combo marks a notable advancement for the company. It is the first CoreXY 3D printer with multicolour capabilities.

Setting up the printer is quick and user-friendly. It includes advanced features like AI-based ‘spaghetti’ detection and auto-干姐的乳汁, making it suitable for users at any skill level. The additional DIY speaker kit is a nice touch, providing an immediate project to demonstrate the printer’s capabilities.

Read more – unboxing, testing and print examples:
Anycubic Kobra S1 Combo Review by Will Zoobkoff.
Back to top ↑

Bambu Lab P1S Combo

Optional AMS – Automatic Material System
Price: $639-$949

Compare the Prices & Bundles:
Official Website

In recent years, Bambu Lab entered the market with its much more expensive Bambu Lab X1-Carbon 3D printer, which also came out with its own AMS. Now there is a newer P2S option available.

The Bambu Lab P1S Combo stands out as one of the top printers and AMS systems on the market today. It distinguishes itself as a top-tier solution for printing enthusiasts, with optional multi-material and multi-color capabilities, lightning-fast print speeds, and a fully enclosed design for high-temperature printing. Despite the possibility of increased waste generated by the AMS – Automatic Material System and somewhat higher noise levels, the P1S remains one of the best printers available.

Read more – unboxing, testing and print examples:
Bambu Lab P1S Combo by Will Zoobkoff.

Creality K2 Series: K2 Plus, K2 Pro
Price: $1,299 – 1,499
Product links:

Compare the Prices & Bundles:
Official Website | AliExpress | Amazon

The Creality K2 Plus boasts the largest build volume in its category at 350x350x350mm, within an enclosed CoreXY design. Building on the success of the K1 series 3D printers, Creality has introduced the K2 Plus Combo with CFS, marking the company’s first foray into multicolor 3D printing. The K2 Plus Combo comes equipped with a four-spool CFS system, and the capability to connect up to three additional boxes, expanding the multicolor potential to as many as 16 colors. Another standout feature is its size; while last year’s K1 Max offered the largest build volume in its price range among fully enclosed CoreXY printers, the K2 Plus boasts an even larger build volume.

Creality has finally delivered on its promises with the release of the K2 Plus Combo, a remarkable fully enclosed CoreXY machine capable of multicolor printing with up to 16 colors. Our extensive testing, which included a variety of projects of varying complexity, helped us evaluate this product thoroughly.

Read more – unboxing, testing and print examples:
Creality K2 Plus Combo Review by Max Funkner.

Creality K2 Pro
Price: $1,049.00 – $1,249.00

Compare the Prices & Bundles:
Official Website | Amazon

The Creality K2 Pro is a solid step forward in the K2 series. I was pleased to see several thoughtful improvements, including the expanding of the waste filament “poop” chute, which makes multi-color printing far more manageable. The overall design and usability show that Creality is listening to feedback and refining the machine in meaningful ways.

Having tested an 8-color, 20-hour CubeMe print, I’m confident the system can scale up to all 16 colors when needed. The multicolor performance was reliable, and the CubeMe avatar result was nothing short of mind-blowing — a real demonstration of how far consumer multicolor 3D printing has come.

Read more – unboxing, testing and print examples:
Creality K2 Pro Combo Review by Max Funkner.
Back to top ↑

AnkerMake M5 – Discontinued

Price: $699-$799

Official Website | Amazon

After a record-breaking fundraising campaign, AnkerMake M5 3D printer developers delivered on their pledge. They are still working to deliver up-to-date software and add-ons for this remarkable product. Its main trump cards are the machine’s default high-speed capability and outstanding design.

AnkerMake M5 and Test Prints
Featured Designs: McGyBeer, 3DPrintBunny, Autodesk/麻匪壁纸资源包下载
©拳头交后啤酒瓶交 – Prints and Photo: Max Funkner

What struck me the most is that most models I tried to print didn’t require slicer tuning. I trusted the existing settings of AnkerMake M5 profiles in various slicer software, and it produced great results with default high-speed settings. For me, it’s important not to have a print running into the night time, no matter how quiet the machine is. Quick printing was a good thing. Apart from the speed bonuses, AnkerMake M5 iconically looks very neat. It stands out. The embedded AI camera, well-functioning app, and slicer software made my experience exceptional. I can see this machine being used by both casual users who want to show off the machine and designers who want their prototypes fast.

Read more – unboxing, testing and print examples:
AnkerMake M5 Review by Max Funkner.
Back to top ↑

Prusa i3 MK4

Price: $799-1099

Official Website | Amazon

The award-winning Original Prusa i3 MK3 has served as the foundation for the newer MK4 generation for many years. A strong community on Printables, a capable slicer, and long-term support are all part of the Prusa ecosystem.

Prusa Research became one of the most reputable brands in the desktop 3D printer market with its slicer software, PrusaSlicer, and constantly growing file repository Printables.

Read more – testing and print examples:
MK3 Upgrades and Other Mods by Max Funkner.

Prusa CORE One

Price: €1,384 Assembled, €1,084 Kit.

Official Website

MK4S to Prusa CORE One Conversion Kit
Price: €489

Official Website

Bigger print volume with a smaller footprint. In recent years, compact CoreXY printers have gained popularity within the maker community. Similar-built machines like the BambuLab X1C and Creality K1 enjoyed their moment. This design is not only practical in many cases but also visually appealing. A neatly built-in enclosure also enhances safety during operation.

Prusa CORE One
Image: Prusa3D

Traditionally, the Prusa Research team launches their product of the year right on or just before the tradeshow; this year was no exception. Everyone expected something, but what exactly, was a big surprise. The Prusa CORE One, a fully enclosed CoreXY 3D printer, was launched with a bang directly at the tradeshow. This machine was instantly deemed as an answer to the known brand X1C machine. Let’s have a quick look at the machine’s main features, why it was so well received, and discuss what happens next.

Read more and images:
Prusa CORE One Features and Builds by Max Funkner.
Back to top ↑

Adventurer 5M Pro

Price: $455-599

Compare the Prices & Bundles:
Amazon | AliExpress | Official Website

Even though this machine is nearly twice as expensive as any Ender-3-like machine, safety-wise, a fully assembled and fully enclosed option is one of the best options to go for in many cases, such as a family with young kids. A fully enclosed environment will also help to deal with bed adhesion and material shrinkage-related issues.

The AD5MP printer is one of the easiest to set up and operate due to its streamlined and intuitive design. Its sleek and clean appearance, combined with the integrated touchscreen interface, enhances its user-friendliness. In terms of performance, the AD5MP produces excellent results across a wide range of prints. Whether it’s elaborate models like the Hellequin Mask or functional items like the firetruck, the AD5MP consistently delivers high-quality prints with sharp details.

Read more – unboxing, testing and print examples:
冲动的惩罚未删减动漫在线观看 Adventurer 5M Pro Review by Will Zoobkoff.
Back to top ↑

The Best Examples of Other Builds

Here, we will list the best examples of inexpensive 3D printers with frames other than Ender-3. Such machines may be built for specific needs or with safety as a priority.

ToolChanger – Prusa XL

Price: $2,323-4,094

Official Website | Amazon

The Prusa XL is among the best-performing multi-color systems available on the consumer market. Prusa Research, the award-winning manufacturer, is highly regarded within the community. This machine has a strong community presence on Printables, powerful slicer software, and other perks.

The Prusa Research team is a prominent presence at various trade shows related to 3D printing and additive manufacturing. At these events, they showcase their latest products designed for hobbyists and professionals.

Throughout my unboxing, build, 干姐的乳汁, and user experience, I was truly astonished by how amazing this printer performed, given its huge size, the most notable advantage being the reduced filament waste often overlooked when launching multiple colour printers. The XL not only provides this capability, but also has the ability to print huge items, such as multiple-colour cosplay items, such as helmets and armour.

Read more – unboxing, testing and print examples:
Prusa XL 5 Toolheads Review by Phil Macey.

3D Printer, Laser, 3p男女做爰高潮了 – 3-in-1 – Snapmaker Artisan NEW

Snapmaker 2.0 A350T
Price: $999 – 1,799

Amazon | Official Website

Snapmaker Artisan
Price: $2,999

Compare the Prices & Bundles:
Official Store | Amazon

We must mention Snapmaker. Even though their machines are much higher than our initial $600 budget, they are worth considering. Not only do they offer 3-in-1 discipline options, but they also come with various optional modules, enclosures, and purifiers. After a few years, the A350T received a quick swap upgrade, which reduced the time to switch between disciplines from approximately 20 minutes to seconds. Again, this showcased that Snapmaker does its best to upgrade existing technology where applicable.

Snapmaker 2.0 A350T is for those who haven’t decided which discipline to master for perfection and want to start their DIY journey with the blast. Separately, better and cheaper machines are available for all three disciplines but not as 3-in-1. Nevertheless, I love where Snapmaker is heading, continuously improving its products and software and adding new add-ons to the ecosystem.

After testing various challenging prints on the Snapmaker Artisan Premium, including multi-color designs and different nozzle sizes, I’m impressed with the significant improvements in 3D printing compared to my previous experience with the single extruder on the Snapmaker A350T. I recommend the dual extrusion 3D printing module for other compatible Snapmaker versions.

Read more – unboxing, testing and print examples:
Snapmaker 2.0 A350T Review by Max Funkner.
Snapmaker Artisan Premium Review by Max Funkner.

Delta 3D Printer – Flsun T1

Price: $499-699

Amazon | Official Website

FLSUN was one of the first 3D printer manufacturers to 拳头交后啤酒瓶交 speedy consumer 3D printers implementing Klipper firmware. Their V400 and Super Racer (SR) were highly praised. Recently, FLSUN launched their new S1 and T1 series machines with many extra features, such as higher speeds and flow rates and enclosed chambers. The FLSUN S1Pro also has an AI Lidar sensor, smart zone heating, and a built-in filament dryer.

FLSUN T1 Delta 3D Printer and Test Prints
Featured Designs: CarPrint, FlexiFactory, 拳头交后啤酒瓶交
©拳头交后啤酒瓶交 – Prints and Photo: Richard Hirst

With its standout features, the FLSUN T1 Delta printer would be a notable addition to any 3D printing studio—its aesthetic makes it worth watching. However, assembling the T1 is not a swift 15-minute task, unlike many other printers today, which demand more time and effort.
There are no competitors to Flsun printers in this technology and price segment. We are happy to see that Flsun continues to push delta printer technology to new heights, bringing affordable machines to a broader market.

Read more – unboxing, testing and print examples:
Flsun T1 Review by Richard Hirst.

MINI – Prusa MINI

Price: $369-529
Product Links:

Official Website | Amazon

Even though this product is at least twice as expensive as a typical budget 3D printer, we must mention it here. The multiple award-winning Prusa Research is the only European company that continues to compete successfully with China-based manufacturers. Buying any of the original Prusa printers is like joining the club. Their community is loyal to the brand and keeps it in a strong position. Prusa Research has successfully launched Printables, an engaging, gamified file repository, which has added to securing their place on the market.

Original Prusa MINI at Formnext
Photo: Max Funkner

The Original Prusa MINI has all the nice-to-have features, like a heated bed, flexible build plate, etc., for carefree printing. Prusa Research developed PrusaSlicer software, which is also highly respected in the community.

OrangeStorm Giga

Price: $2,500

Official Website

The OrangeStorm Giga is Elegoo’s latest large-format 3D printer. It promises a massive build volume, fast print speeds, multiple extruders, and more at a pre-order price of $2,399. Breaking away from the typical Solar System-themed names of the Elegoo product lines (Jupiter, Neptune, Mars, etc.), the OrangeStorm Giga stands apart both in naming convention and overall size.

It is astonishing how Elegoo is bringing such a large-scale OrangeStorm Giga to the mass market.

Interested in learning more about the OrangeStorm Giga? Keep reading to discover more about the technical specs and surprises that this large format filament 3D printer has in store. From multiple extruders to a build platform composed of four independently controlled heating elements, the OrangeStorm Giga will likely quickly find a home in prosumer shops looking to increase the maximum size parts they offer.

Read more and images:
A Quick Look by Andrew Sink.

Kidoodle MiniBox A1

Price: $400

Official Website

The Kidoodle MiniBox A1 is a compact enclosed FDM 3D printer designed with younger users and families in mind. Its safety-focused design includes an enclosed chamber, open-door detection, access controls, a friendly touchscreen interface, and app-based model access. As with any 3D printer, it should still be used under adult supervision, but the overall setup makes it one of the more approachable options for introducing children to 3D printing.

Why did the Kidoodle MiniBox A1 make it into the ‘Other Builds’ section? Apart from the build, it also has its use case. It does not offer the same level of tweaking as machines like the Bambu Lab A1 mini or Prusa Mini, but its enclosed design, simple workflow, and portability make it a convenient option for kids’ activities, family holidays, or even children’s parties.

In our hands-on testing, the MiniBox A1 printed a wide range of small educational and fun models, including numbers, animals, flexi articulated prints, puzzles, and custom-sliced designs. The built-in model library and Kidoodle app make it easy to start printing quickly, while the small build volume and mini-spool system help keep the machine compact and manageable. Bed adhesion may need some attention at the beginning, and the printer can be noisy at higher speeds.

Read more – unboxing, testing and print examples:
Kidoodle MiniBox A1 Review by Max Funkner.
Back to top ↑

Conclusion

If you’re looking for an inexpensive 3D printer, we hope our buyer’s guide gave you some ideas. Still, keep in mind that you may need to have some technical skills to get the most out of these printers. We’ve outlined the strengths and drawbacks for each option so that you can make an informed decision before purchasing. It is always advisable to read the full reviews to help you choose the right machine for your specific needs or circumstances. Have you decided which printer is right for you? Why? Please let us in the comments.

Have questions? Feel free to ask in the comment section below.
For a wider discussion and to share your own favourite 3D printers and setups, you’re welcome to join the conversation on our forum:

Visit 拳头交后啤酒瓶交 Forum

Table of Contents (Jump to a Section)

Resin 3D Printing – How Does It Work
Prices Explained
Small Volume Budget 3D Printers in the $300 Price Range
- Elegoo Mars 5 Ultra NEW
- Anycubic Photon Mono 4
Medium Volume Budget 3D Printers in the $600 Price Range
Large Volume Budget 3D Printers in the $1000 Price Range
- Anycubic Photon Mono M7 Max NEW
- Elegoo Jupiter
Innovations
General Uses
What to Consider

Resin 3D Printers – Brief History

Resin-based 3D printing has roots going back to the 1970s, with the Stereolithography (SLA) process patented in the mid-1980s, making it one of the earliest 3D printing technologies. Known for its high precision and smooth surface finish, SLA became a mainstay in industrial prototyping and continues to be widely used today. With the rise of the open-source movement and growing interest in FDM printers during the 2010s, resin printing also gained momentum, becoming more affordable and accessible to hobbyists, makers, and small businesses.

Resin 3D Printing – How Does It Work?

Resin 3D printing works by curing liquid photopolymer resin layer by layer using a focused light source, typically UV. Unlike FDM printing, which extrudes melted plastic through a nozzle, resin printers use either a laser (SLA), projector (DLP), or masked LCD screen to solidify each layer with high precision. This process allows for finer details, smoother surfaces, and is especially well-suited for miniatures, dental models, and other high-detail applications. However, it often requires more post-processing and safety precautions due to resin handling.

https://拳头交后啤酒瓶交.com/wp-content/uploads/2022/07/ResinLapse-Anycubic-M3-Max-TimeLapse-Capture.mp4

Prices Explained

Resin 3D printers now span a wide price range, from entry-level models under $200 to professional machines costing several thousand. Most consumer-grade printers fall between $200 and $800, offering impressive resolution, touchscreen controls, and decent build volumes. What drives price differences? Key factors include resolution (2K to 16K), build quality, speed, advanced features like resin auto-refill or AI monitoring, and the reliability of customer support.

While high resolution once came at a premium, it’s now common across even budget machines thanks to intense competition. Still, premium brands like Formlabs, maintain higher price tags by offering robust ecosystems, and long-term service.

The Best Small Volume Budget 3D Printers in the $300 Price Range

These are the most popular resin 3D printers, mostly because they come with a very affordable price tag. During sales or other campaigns, machines in this category, even from popular brands, can be found for as low as $150, while clearances can push the price to below $100 in some cases.

Elegoo Mars 5 Ultra 9K

Price: $269-$338
Resolution: 9K
Build Volume: 153.36×77.76x165mm/6.04”x3.06”x6.5”

Compare the Prices & Bundles:
Amazon | Official Website

Attractive price tags and a large user community brought Elegoo Mars series printers into the league of the top bestselling machines for a few consecutive years.

Andrew Sink printed various models using his Elegoo Mars 5 Ultra. He showcased his original design, a 3D scan from the Rodin sculpture, a dragon model by Loubie3D and other models. Read the review article, complete with many images of the prints.

The Elegoo Mars 5 Ultra has a list of features that would have seemed like a moonshot wish list only a few years ago, yet it remains affordable and accessible to beginners. Automatic build platform 干姐的乳汁, resin level detection, integrated print monitoring via webcam, 18 micron XY pixel size, and other features all give the Mars 5 Ultra a competitive edge over the competition. The sub-$300 price point makes this an easy purchase to justify for beginners and power users alike, and the performance of the Mars 5 Ultra puts it at the top of the list of the best desktop resin 3D printers.

Read more – unboxing, testing and project examples:
Elegoo Mars 5 Ultra Review by Andrew Sink
Elegoo Mars 3 Pro Review by Andrew Sink

Anycubic Photon Mono 4

Price: $219-299
Resolution: 10K
Build Volume: 153.4mm*87mm*165mm

Compare the Prices & Bundles:
Amazon | AliExpress | Official Website

Anycubic is another brand that has a very strong community, especially on Facebook. Photon Mono 4 is just one of the options from a wide range of machines in the Photon series.

We haven’t evaluated the Photon Mono 4 just yet. Here are the testing results of the previous Photon series machine in this volume and price range.

Read more – unboxing, testing and project examples:
Anycubic Photon M3 Review by Will Zoobkoff.

The Best Medium Volume Budget 3D Printers in the $600 Price Range

Sometimes with twice the bigger build volume compared to the small-sized printers featured above, these machines are more for professionals who print items in bulk or enthusiasts who decide to give highly detailed miniatures and fan art a larger scale.

Anycubic Photon P1

Where to Buy the Anycubic Photon P1
Price: $599-699

Compare the Prices & Bundles:
Official Store | Amazon | AliExpress

Anycubic Sitewide $20 off $200+ Orders Code: 拳头交后啤酒瓶交

The Anycubic Photon P1 stands out as a modern resin 3D printer that combines high-detail output with a smoother, more user-friendly workflow. Features such as the heated resin vat, latch-based build plate system, built-in camera, and enclosed design make it an appealing option for makers who want strong print quality without the usual setup hassle.

In testing, the Photon P1 handled 干姐的乳汁 pieces, character models, and display prints with consistently impressive detail. At the same time, there are still a couple of practical points worth noting. Some resin splashing or residue can appear during the heating cycle, and the flat-edged build plate can hold a fair amount of resin after printing, so extra care is needed when removing finished models. Even with those points in mind, this is a very capable and enjoyable resin printer that made resin printing feel approachable and rewarding again.

Read more – unboxing, testing and project examples:
Anycubic Photon P1 Review by Phil Macey.

Piocreat HALOT-X1

Where to Buy
Price: $579 – $749.00 USD

Compare the Prices & Bundles:
Official Store

The PioCreat HALOT-X1 is a high-resolution consumer resin 3D printer featuring a true 16K mono LCD (15,120 × 6,230 pixels) and an innovative motion system that moves the vat and light engine instead of the build plate, eliminating manual leveling and reducing vibration. Designed for creators who demand detail—like miniature painters and product designers—it also supports an optional auto-feed unit (AFU) for hands-free resin refills. Built by PioCreat, a Creality Group subsidiary with deep R&D roots, the HALOT-X1 reflects the company’s broader mission to deliver advanced, accessible tools for professionals and hobbyists alike.

PioCreat HALOT-X1 shown with a variety of highly detailed resin prints and included accessories
©拳头交后啤酒瓶交 – Photo: Will Zoobkoff

If you value sharp, repeatable results with minimal fuss, the Halot X1’s moving resin vat + solid-mount bed architecture and intelligent light system make it a standout choice for miniature painters, prop makers, and small studios. With excellent detail, simple setup, and smart resin handling, it feels less like spec-sheet theater and more like a practical step toward hassle-free, high-detail resin printing.

Read more – unboxing, testing and project examples:
PioCreat HALOT-X1 Review by Will Zoobkoff.

Elegoo Saturn 4 and Saturn 4 Ultra

Elegoo Saturn 4
Price: $319
Resolution: 12K
Build Volume: 218 x 122 x 220mm / 8.58” x 4.80” x 8.66”
Product links:

Amazon
Official Website

Elegoo Saturn 4 Ultra
Price: $449-561
Resolution: 12K
Build Volume: 218 x 122 x 220mm / 8.58” x 4.80” x 8.66”
Product links:

Official Website

This year, Elegoo again launched two Saturns: the basic Saturn 4 and the premium Saturn 4 Ultra. A lot of sophisticated features were added, surprisingly, to both machines, such as auto-leveling and a user-friendly flip-back cover design. Even though the Ultra version has significantly more features for a higher price, the basic Saturn 4 appeared to have everything to complete the tasks with great results.

Quick Comparison Saturn 4 with Saturn 4 Ultra:
No Tilt Release Technology – that allows printing faster.
No Built-in Camera for Monitoring, Error Detection, and Timelapse videos.
No Wi-Fi Connectivity.
No Extra Anti-drip Tray.

I was fortunate enough to review three Elegoo Saturns in a row, and if Saturn 2 and Saturn 3 didn’t have a lot of difference between them apart from higher resolution, then Saturn 4 differs in many ways. Now, Saturn 4 received an automatic leveling, a different printing bed and attachment system, and a user-friendly protective cover design. And these are still basic features for the basic version to maintain a very competitive price.

The Elegoo Saturn Ultra 16K has been exceptional to test and use for printing. The machine’s construction is top-notch, retaining the flip-lid design of the 12k Ultra while boosting the resolution to 16K. A major upgrade is the heated resin VAT. During tests, local outside temperatures plunged below zero. In an unheated workshop, such conditions would typically halt printing. However, the heated VAT performed exceptionally, maintaining a steady temperature of about 25°C. It utilizes the build plate to agitate the resin, moving up and down to distribute heat evenly.

Read more:
Elegoo Saturn 4 Review by Max Funkner
Elegoo Saturn 4 Ultra 16K Review by Phil Macey

Nova3D Whale4

Price: $499 – $669
Product links:

Official Website

As the product is new, it is not available on Amazon or AliExpress shelves just yet, but it may appear soon. Here is their shop on Amazon.

The Nova3D Whale4 Ultra is upgraded from its prequel, enjoying a lineup of impressive updates on both its feature set and handling. With its stunning 16K screen, upgraded UV light system with more rapid curing, and convenient features in the design of its resident resin warmer and air filtration system, this 3D printer guarantees accuracy and ease of use.

Nova3D Whale4 Ultra 16K and Test Prints 麻匪壁纸资源包下载

In our rigorous testing, the Whale4 Ultra continuously delivered sharp, quality prints whether it was printing with the SUNLU 14K resin or with the Standard resin offered by Nova3D, which showed its capabilities in high-resolution display and advanced features.

Read more – unboxing, testing and project examples:
Nova3D Whale4 Review by Will Zoobkoff.

ANYCUBIC Photon Mono M5s

Price: $519-719
Resolution: 12K
Build Volume: 8.58 x 4.84 x 7.87in / 218 x 123 x 200mm

Amazon
Official Website

The Anycubic Photon Mono M5s is the latest installment in the popular Photon Mono line of resin 3D printers from Anycubic. This line primarily brings resin 3D printers to beginners and new users at a reasonable price point.

The Photon Mono M5s has a list of new hardware features that is guaranteed to impress even experienced 3D printer users, and features quality-of-life features designed to help beginners. Between the 12K resolution, the new automatic build platform leveling process, and the 3rd generation release film on the vat, the $539 Photon Mono M5s boasts across-the-board upgrades without the corresponding jump in price. Check the print quality and read the full review by Andrew Sink.

Anycubic Photon Mono M7 Pro
Price: $499 – $669

Amazon
AliExpress
Official Website

The Anycubic Photon line has evolved, culminating with the most recent model, the Photon Mono M7 Pro. Building on the highly renowned Photon Mono M5s Pro, the M7 Pro has a higher resolution of 16.8 x 24.8 microns and the same automated self-check technology. It also adds an integrated vat heating system and the option of using the Anycubic air filtration system or the new auto-fill and recycling system. Check the print quality and read the Anycubic Photon Mono M7 Pro Review by Will Zoobkoff.

The Best Large Volume Budget 3D Printers in the $1000 Price Range

What are the biggest build volume resin 3D printers that can be purchased for approximately $1000? Professional-grade 3D printers are obviously used for mass 3D printing or to print extra-large objects. Compare Anycubic Photon M3 Max with Elegoo Jupiter.

Anycubic Photon M7 Max

Price: $799-$899
Resolution: 7K
Build Volume: 10.9×6.11.8in / 298x164x300mm

Official Website

AliExpress

Amazon

Compared to its predecessor, the Photon M3 Max, the Anycubic Photon M7 Max has a myriad of new features designed to streamline and expedite printing. The new COB light system and Fresnel lens improve light uniformity compared to previous LED panel systems, for a more level exposure on the build plate. The Intelligent Release 2.0 system with pressure sensors dynamically switches between lift height of a layer, in helping to reduce printing time.

The Anycubic Photon M7 Max is a resin behemoth printer that excels at large-format printing, batch printing miniatures, and dioramas in less time with fewer build plates. While its screen resolution is slightly lower than that of other current printers, that’s hardly noticeable given the high quality of print it achieves. From wearable masks and intricate dioramas to gigantic busts, the Photon M7 Max printed each test perfectly, demonstrating its versatility and reliability.

Read more – unboxing, testing and project examples:
Anycubic Photon M7 Max Review by Will Zoobkoff.
Anycubic Photon M3 Max Review by Will Zoobkoff.

Elegoo Jupiter

Price: $940-1,200
Resolution: 6K
Build Volume: 10.9×6.11.8in / 277x156x300mm

Official Website

With a strong community across the globe, it was not a surprise that this 麻匪壁纸资源包下载 campaign accumulated $4.7mln with over 5,000 backers. To have a feel how big this machine is please check the image below where Elegoo Jupiter placed next to Mars and Saturn printers.

Elegoo Jupiter in comparison with Saturn and Mars
Image: Elegoo

With a strong community across the globe, it was not a surprise that this 麻匪壁纸资源包下载 campaign accumulated $4.7mln with over 5,000 backers. Jupiter offers a large format high-resolution printing experience. Elegoo’s community and supporters actively suggest and comment on various improvements, and Jupiter’s design was tweaked during the campaign. As a result, an Ethernet port has been added together with a few other adjustments. The Super Early Birds were lucky to secure this machine for a special price of only $600.

Innovations Around Resin 3D Printers

SLA in 3D printing used to be associated with the slow printing process which may be hazardous in the home environment. During the past few years, we have been witnessing a big number of resin 3d printers launched, the majority were LCD followed by DLP. Among the most common innovations were improved precision, speed, and a larger build volume. Other innovations were in connection to a more silent printing process, purifying systems, and better bed adhesion. All these 冲动的惩罚未删减动漫在线观看d to resin 3D printers becoming a common choice for hobbyists.

Auto Leveling System

Leveling the build platform can be a daunting task for beginners, as the platform must be perfectly planar with the LCD screen and resin vat film in order to get a consistent offset at all points. Typically, resin printers like the Anycubic Photon M3 Plus or the Elegoo Mars 3 Pro use a multi-bolt leveling system to set the position of the platform, which can be a tedious and difficult task. If the build platform isn’t leveled, parts will have difficulty adhering, be dimensionally inaccurate, or potentially cause damage to the delicate LCD screen.

Anycubic has addressed this by adding a mechanical sensor to the cantilevered arm of the Photon Mono M5s which is able to detect when the platform is level automatically when a print starts. Read Photon Mono M5s review by Andrew Sink.

A Quick-release Vat System

One of the standout features of the GK TWO printer is its unique resin vat docking system. As someone who has worked with different printers in the past, I can confidently say that using the GK TWO was much more efficient and streamlined. Instead of fumbling with bolts on either side of the vat, simply slid it into place and it locked securely into position. Read 麻匪壁纸资源包下载 GKtwo review by Richard Hirst

We are delighted to see that such enhanced features, usually seen on professional resin 3D printers, are getting implemented on budget 3D resin printers as well.

Tilting Vat System

Notable feature of the Mars 5 Ultra is the tilting vat, which separates the part from the release film instead of simply raising the platform. This is the same process used on the Prusa SL1S, and is primarily intended to increase the overall print speed without risking the part delaminating from the platform.

Instead of lifting the platform, the Elegoo Mars 5 Ultra tilts the resin vat after each layer. Read full Elegoo Mars 5 Ultra Review by Andrew Sink

DCLF 3D Printer – HITRY Rocket 1

Rocket 1 by HITRY benefits from a new DCLF, Digital Continuous Liquid Forming, technology for printing in resin and promises a higher speed and better quality using a new type of resin. Let’s take a look at the Rocket 1 campaign, check specifications and take the first glance at this novel technology.

DCLF 3D Printing in Process – Submerged HITRY Build Plate
(Image: HITRY)

Resin Pump System

While the automatic pump works well, the amount of tubes, wires, and probes make this system look a little less professional, and a little more like a science project. In addition, the black tube which delivers the resin will need to be flushed whenever resin is changed to fully change colors and to prevent it from potentially hardening and blocking the stream. Read more in Anycubic Photon M3 Plus review by Andrew Sink.

Uses of Resin 3D Printers

The original SLA machines have been primarily used for prototyping. The main purpose of such machines is to help designers to test and feel the future product in a prototype mode. Nowadays prototyping is widely used in the automotive industry, medicine, for surgery planning, architecture, and other areas. SLA, LCD, and DLP resin 3D printers are gaining ground in dentistry, audiology, and jewelry.
From the hobbyist perspective, this technology is invaluable for creating complex figurines and miniatures that can be used in tabletop gaming. With the ability to print in great detail, designers can let their imagination run free.

What to Consider

With all the benefits that this technology brings, it may be tempting to try it out at home. There are a few aspects to consider.
– Health and Safety. Dealing with resins may be a messy job, and as this material is hazardous, strict safety measures have to be put in place. Wearing gloves and protective goggles is one. Designating the work area which is well ventilated and out of children’s reach is another.
– Post-processing. Prints made in resin require washing and curing, and this leads to buying an extra item – a Wash & Cure machine.
– Part replacement. LCD monitor lasts for 2-3 years on average, so be prepared for replacing it, which may result in an extra $200-500, depending on the brand.